1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Tribesigns Extra Long Console Table, Model HOGA-C0770X. Please read this manual thoroughly before assembly and use to ensure proper setup and safe operation.
Image 1.1: The Tribesigns Extra Long Console Table, featuring a rustic brown finish and black metal frame, positioned in a living room.
2. Safety Information
Please observe the following safety precautions:
- Keep all small parts and tools away from children during assembly.
- Exercise caution during assembly to prevent injury.
- For stability and safety, it is recommended to secure the table to a wall, especially if placed in an area where it could be tipped over. Wall anchoring hardware may be required (not included).
- Do not exceed the maximum weight recommendation of 100 pounds (45.36 kg) for the entire table. Distribute weight evenly across shelves.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop Panels (Engineered Wood)
- Shelf Panels (Engineered Wood)
- Metal Frame Components (Legs, Crossbars, Circular Frame)
- Assembly Hardware (Screws, Bolts, Washers, Allen Wrench)
- Adjustable Leg Pads
- Assembly Guide (this document)
Image 3.1: An exploded diagram illustrating all parts and hardware included in the package for assembly.
4. Setup and Assembly Instructions
Assembly typically takes approximately 30 minutes. Two people are recommended for easier and safer assembly. A screwdriver is recommended in addition to the included tools.
- Prepare the Area: Clear a spacious, clean, and flat area for assembly. Lay down the packaging material to protect the floor and table components.
- Identify Parts: Unpack all components and identify them using the provided parts list and diagrams.
- Assemble the Metal Frame: Begin by connecting the main vertical and horizontal metal frame components using the provided screws and Allen wrench. Do not fully tighten screws until all parts are aligned.
- Install Circular Frame: Attach the distinctive circular metal frame into its designated position within the main frame structure. Ensure it is securely fitted.
- Attach Shelf Panels: Place the engineered wood shelf panels onto the designated supports within the metal frame. Secure them with screws.
- Attach Top Panel: Secure the main tabletop panel to the top of the assembled frame.
- Tighten All Screws: Once all components are in place and aligned, gradually tighten all screws to ensure a stable and secure structure.
- Install Adjustable Leg Pads: Screw the adjustable leg pads into the bottom of the table legs. These can be adjusted to stabilize the table on uneven surfaces.
Image 4.1: Detailed dimensions of the console table, including height, width, and depth, and shelf spacing.
5. Operating Instructions
The Tribesigns Extra Long Console Table is designed for versatile use in various indoor settings.
- Placement: Ideal for entryways, hallways, living rooms (behind a sofa), or as a display unit.
- Display and Storage: Utilize the 70.9-inch tabletop and three open tiers for displaying decorative items, books, storage boxes, or other personal belongings.
- Stability: Ensure the table is placed on a level surface. Use the adjustable leg pads to compensate for minor unevenness.
Image 5.1: The console table positioned behind a couch, showcasing its use for display and storage.
6. Maintenance
Proper care will extend the life and appearance of your console table.
- Cleaning: Wipe surfaces with a damp cloth for general cleaning. Follow with a dry cloth to remove moisture.
- Spills: Immediately wipe up any spills to prevent water damage or staining, as the engineered wood is water-resistant but not waterproof.
- Protection: Avoid placing hot items directly on the surface. Use coasters or protective pads as needed.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Image 6.1: A close-up view demonstrating the scratch and water-resistant properties of the table's surface.
7. Troubleshooting
If you encounter any issues, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly or unstable. | Uneven floor; loose screws. | Adjust the leg pads until stable. Tighten all assembly screws. |
| Parts do not align during assembly. | Screws overtightened prematurely; incorrect orientation of parts. | Loosen all screws, re-align parts, then gradually tighten. Refer to the assembly guide diagrams. |
| Missing hardware or damaged parts. | Shipping damage; packaging error. | Contact Tribesigns customer support for replacement parts. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Tribesigns |
| Model Name | HOGA-C0770X |
| Product Dimensions (D x W x H) | 11.75"D x 70.9"W x 35.25"H (29.8cm D x 180.1cm W x 89.5cm H) |
| Item Weight | 50.7 Pounds (23 kg) |
| Maximum Weight Recommendation | 100 Pounds (45.36 kg) |
| Color | Black Brown |
| Material Type | Engineered Wood (MDF), Metal |
| Number of Tiers/Racks | 3 |
| Assembly Required | Yes (2 people recommended) |
| Included Components | Assembly Guide, Installation Tool |
Image 8.1: A visual summary of the console table's key product specifications.
9. Warranty and Support
This Tribesigns product comes with a Limited Warranty. For specific warranty details, claims, or technical support, please contact Tribesigns customer service directly. Contact information can typically be found on the product packaging or the official Tribesigns website.
If you encounter difficulties or have questions during the installation or use of your product, please do not hesitate to reach out to us. We are committed to providing comprehensive support.