1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your SimpliFire 32-Inch Electric Fireplace Insert, Model GI-32-ZC. Please read all instructions carefully before use to ensure proper function and safety.
The SimpliFire Electric Fireplace Insert offers the following key features:
- Installation into a wood fireplace opening with a surround kit or any framed opening with the self-trimming design.
- Quick room warming with a 1,500W heater.
- Year-round ambiance with or without heat, featuring authentic logs, glowing embers, and a beautiful flame effect.
- Easy plug-in operation with an attached cord.

2. Important Safety Information
Please read and understand all safety instructions before installing or operating this electric fireplace insert. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.
- Read all instructions before installing or using this fireplace.
- Do not operate any fireplace with a damaged cord or plug, or if the heater has malfunctioned, been dropped, or damaged in any manner.
- Do not run the power cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange the cord away from traffic areas to prevent tripping hazards.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the fireplace.
- Extreme caution is necessary when any heater is used by or near children or individuals with reduced physical, sensory, or mental capabilities, and whenever the fireplace is left operating and unattended.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This fireplace has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
- Use this fireplace only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
3. Setup and Installation
3.1 Measuring Your Existing Fireplace Opening
Accurate measurements of your existing fireplace opening are crucial to ensure proper fit for the SimpliFire Electric Fireplace Insert. Refer to the diagram and table below for required dimensions.

Fireplace Opening Dimensions for Model GI-32-ZC
| Model | Front Width | Rear Width | Height | Depth |
|---|---|---|---|---|
| GI-32-ZC | 29-1/8 in. (740 mm) | 24 in. (610 mm) | 19-3/4 in. (502 mm) | 8-3/4 in. (222 mm) |
3.2 Selecting a Surround (Optional)
A surround kit can be used to fill any gaps between the fireplace insert and your existing fireplace opening, providing a finished look. Two sizes are available: Small (IS-36-GI32) and Large (IS-42-GI32). Refer to the diagram above for visual guidance on surround fitment.
Surround Kit Dimensions
| Model | Surround SKU | Width W | 3-Sided H1 | 4-Sided H2 | Depth | X | Y1 | Y2 |
|---|---|---|---|---|---|---|---|---|
| GI-32-ZC | SMALL IS-36-GI32 | 36-1/2 in. (927 mm) | 27-1/4 in. (692 mm) | 31-1/4 in. (794 mm) | 13/16 in. (20 mm) | 2-1/2 in. (64 mm) | 6-1/2 in. (165 mm) | 4 in. (102 mm) |
| LARGE IS-42-GI32 | 42-1/2 in. (1080 mm) | 28-3/4 in. (730 mm) | 32-3/4 in. (832 mm) | 13/16 in. (20 mm) | 5-1/2 in. (140 mm) | 8-1/2 in. (205 mm) | 4 in. (102 mm) |
3.3 Electrical Connection
The SimpliFire Electric Fireplace Insert operates on a standard 120V AC household circuit. Ensure the electrical outlet is properly grounded. The fireplace comes with an attached 72-inch 110V plug-in cord for convenient installation.

4. Operating Instructions
4.1 Remote Control Functions
The SimpliFire Electric Fireplace Insert can be operated using the included multifunction remote control. The remote requires 2x AAA batteries (included) and has a coverage range of up to 13 feet.

- Power Button: Turns the fireplace unit on or off.
- Flame Button: Activates or deactivates the flame effect.
- Ember Light Button: Adjusts the ember bed lighting.
- Accent Light Button: Controls the accent lighting feature.
- Heater Button: Press once for the low heat setting. Press twice for the high heat setting (1500W).
4.2 Manual Controls
In addition to the remote, the unit features manual controls located on the fireplace itself. These include a main power switch, a flame button, a heater button, and a thermostat knob for direct control.

5. Maintenance
5.1 General Maintenance
The SimpliFire Electric Fireplace Insert is designed for low maintenance. Regular care will ensure optimal performance and longevity.
- Cleaning: Ensure the unit is turned off and unplugged before cleaning. Use a soft, damp cloth to clean surfaces. Do not use abrasive cleaners or harsh chemicals.
- Ventilation: Periodically check and keep the air intake and exhaust vents clear of dust and debris to ensure proper airflow and prevent overheating.
- Light Bulbs: The unit utilizes energy-efficient LED lighting, which typically does not require replacement under normal operating conditions.
- Cord Inspection: Regularly inspect the power cord for any signs of damage, fraying, or overheating. If any damage is observed, discontinue use immediately and contact customer support.
6. Specifications
Product Specifications for Model GI-32-ZC
| Feature | Detail |
|---|---|
| Brand | SIMPLIFIRE |
| Model Name | SimpliFire Electric Fireplace Insert |
| Model Number | GI-32-ZC |
| Power Source | Corded Electric |
| Product Dimensions (D x W x H) | 8"D x 28.13"W x 19"H |
| Material | Metal |
| Finish Type | Painted |
| Installation Type | Framed Opening or Wood Fireplace |
| Heat Output | 1500 Watts |
| Special Feature | Corded |
| Style | Contemporary |
| Color | Black |
| Room Type | Home Office, Living Room, finished basement |
| Ventilation Type | Vent Free |
| Heating Coverage | 400 square feet |
| Included Components | Remote Control |
| Specific Uses For Product | Indoor |
| Item Weight | 37 Pounds |
| Shape | Rectangular |
| Power Consumption | 1500 Watts |
| Warranty Type | Limited |
| Burner Type | Quartz |
| UPC | 652174090730 |
7. Warranty and Support
7.1 Warranty Information
This SimpliFire Electric Fireplace Insert comes with a Limited Warranty. Please refer to the warranty documentation included with your purchase for specific terms, conditions, and duration of coverage.
7.2 Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact SIMPLIFIRE customer support. Visit the official SIMPLIFIRE website or their Amazon store for contact information and additional resources.





