PALONE WD-243
PALONE Electric Bug Zapper Instruction Manual
Model: WD-243
Introduction
The PALONE Electric Bug Zapper is designed to effectively eliminate flying insects using a high-voltage grid and UV LED lights. This device is suitable for both indoor and outdoor use, providing a chemical-free and odor-free solution for pest control.
Safety Information
- Keep out of reach of children and pets.
- Do not touch the internal high-voltage grid.
- Ensure the device is unplugged before cleaning or maintenance.
- Do not use in areas where flammable vapors or explosive dust are present.
- The device is equipped with safety fences surrounding the voltage grid to reduce the chance of electric shock.
This bug zapper uses simple physics to tackle mosquito troubles healthily and effectively. Unlike conventional irritant products, this bug zapper is chemical- and odor-free.
Package Contents
- PALONE Electric Bug Zapper (Model: WD-243)
- USB Cable (approx. 59in/1.5m long)
- Hanging Chain (approx. 52.7cm/20.7 inch long)
- Cleaning Brush (implied by cleaning instructions)
Setup
- Unpack: Carefully remove the bug zapper and all accessories from the packaging.
- Placement: Choose a suitable location for the bug zapper. It can be placed on a flat surface or hung using the provided chain.
- Hanging Installation (Optional): If hanging, attach the stainless steel chain to the designated points on the top of the zapper. Ensure the chain is securely mounted to a tree or wall to avoid accidental touching or hitting.
- Power Connection: Locate the USB port on the right side of the bug zapper. Connect the provided USB cable to the port and plug the other end into a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port).

Figure 1: Power Button and USB Connection. Simply plug in the USB interface to start using the device.

Figure 2: Key Components - UV LED Tubes, Safety Fence, and Collection Tray.

Figure 3: Two Placement Ways - Standing and Hanging. The included chain allows for versatile placement.
Operating Instructions
- Power On: Once connected to a power source, locate the power button on the right side of the device. Press the power button to turn on the bug zapper. The UV LED lights will illuminate.
- Operation: The bug zapper will now attract flying insects using its special wavelength LED light. Insects drawn to the light will come into contact with the 3200V power grid and be electrocuted.
- Optimal Performance: For best results, operate the bug zapper in darker environments, as the UV light will be more effective at attracting insects.
- Power Off: To turn off the bug zapper, press the power button again.

Figure 4: The PALONE Electric Bug Zapper in operation, attracting and zapping insects.
Maintenance
Regular cleaning ensures optimal performance and longevity of your bug zapper. Always unplug the device before cleaning.
- Empty Collection Tray: The bottom of the PALONE bug zapper has a removable tray where dead insects are collected. Slide out the collection tray and dispose of the contents.
- Clean Tray: Rinse the collection tray with water and mild soap. Ensure it is completely dry before reinserting.
- Clean Grid and Bulbs: The outer fence is also removable. Open the fence first, then use a tissue or the provided cleaning brush to gently clean the grid and bulbs. This will allow any remaining dead insect bodies to drop into the bottom tray.
- Reassemble: Once all components are clean and dry, put them back together securely.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not plugged in correctly; Power button not pressed; No power from USB source. | Ensure USB cable is securely connected. Press the power button. Try a different USB power source. |
| Insects are not being zapped. | Grid is dirty; Device is in a brightly lit area. | Clean the high-voltage grid as per maintenance instructions. Move the zapper to a darker area for better attraction. |
| Device makes unusual noises. | Normal operation (zapping sound); Internal component issue. | A slight "zap" sound is normal when insects are electrocuted. If the noise is continuous or unusual, unplug the device and contact customer support. |
Specifications
- Brand: PALONE
- Model: WD-243
- Color: Black
- Style: 10.43×2.56×16.54 IN
- Material: Stainless Steel
- Item Weight: 2.16 pounds (980 Grams)
- Product Dimensions: 15.75 x 2.2 x 9.45 inches
- Power Grid Voltage: 3200V
- Target Species: Insects
- Power Source: USB (DC 5V)
Warranty and Support
PALONE products are manufactured with high-quality materials and undergo strict quality control. For warranty information, technical support, or any questions regarding your PALONE Electric Bug Zapper, please refer to the contact information provided with your purchase or visit the official PALONE website.
Manufacturer: PALONE
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.