Flyrivergo Rotating Display Stand with LED Light

Introduction

This manual provides instructions for the safe and efficient operation of your Flyrivergo Rotating Display Stand with LED Light. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

Always ensure the product is placed on a stable, flat surface. Do not exceed the maximum load capacity of 44 lbs (20 kg). Keep away from water and extreme temperatures. Unplug when not in use or during cleaning.

Package Contents

• 1 x Rotating Display Stand with LED Light
• 1 x Power Adapter (110V)

Image: The rotating display stand shown next to its brown packaging box and power cable.

Setup

1. Place the display stand on a flat, stable surface.
2. Connect the power adapter to the stand's power input port.
3. Plug the power adapter into a standard 110V electrical outlet.
4. Ensure the stand is stable before placing any items on it.

Operating Instructions

Controls Overview

The display stand features three main controls:

• Rotating Switch Button: Controls the rotation direction (clockwise/counter-clockwise) and turns rotation on/off.
• Light Switch Button: Turns the LED light on or off.
• Brightness Adjustment Knob: Dims or brightens the LED light.

Image: Detailed view of the control buttons and knob on the side of the display stand.

Rotation Control

1. To start rotation, press the rotating switch button.
2. To change rotation direction (clockwise or counter-clockwise), press the rotating switch button again.
3. To stop rotation, press the rotating switch button until it is off.

Image: Illustration of the rotation control, showing how to switch between clockwise and counter-clockwise motion.

LED Light Control

1. To turn on the LED light, press the light switch button.
2. To adjust brightness, turn the brightness adjustment knob clockwise to increase brightness and counter-clockwise to decrease it.
3. To turn off the LED light, press the light switch button again.

Image: Visual guide demonstrating how to adjust the LED light brightness using the control knob.

Operating Modes

The display stand supports three operating modes:

• Mode 1: Rotation Only (controlled by rotating switch).
• Mode 2: Lighting Only (controlled by light switch and dimmer).
• Mode 3: Rotation + Lighting (both functions active).

Image: Graphic depicting the three available modes for the display stand.

Quiet Operation

The rotating stand features a smooth motor designed for quiet operation (≤40dB), ensuring minimal disturbance during use, such as video recording.

Image: Chart comparing the noise level of the turntable to common sounds.

Features

• High Load Capacity: Supports up to 44 lbs (20 kg), suitable for various products.
• Adjustable LED Light: Integrated white LED lighting with adjustable brightness to enhance product visibility and eliminate shadows.
• Bi-directional Rotation: Easily switch between clockwise and counter-clockwise rotation.
• Quiet Motor: Operates at ≤40dB, ideal for photography and video recording without noise interference.
• Durable Construction: Made from ABS material with anti-slip feet for stability.

Image: The display stand illuminating a glass, showcasing the effect of the LED light.

Specifications

Image: Visual representation of the product specifications.

Maintenance

• Clean the surface with a soft, dry cloth.
• Do not use abrasive cleaners or solvents.
• Ensure the device is unplugged before cleaning.

Troubleshooting

• Not rotating: Check power connection. Ensure the rotating switch is on. Reduce load if exceeding capacity.
• Light not working: Check power connection. Ensure the light switch is on. Adjust brightness knob.
• Unusual noise: Ensure the load is balanced and within capacity. Check for any obstructions.

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Flyrivergo customer service directly. Keep your purchase receipt for warranty claims.

Product Videos