Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Thinkbee Wireless Lights Switch Kit. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
The Thinkbee Wireless Lights Switch Kit offers a convenient solution for controlling lighting fixtures without the need for complex wiring. It features a wireless switch and a mini receiver, designed for ease of installation and reliable performance.
Product Components
The Thinkbee Wireless Lights Switch Kit includes the following items:
- 1 x Wireless Switch
- 1 x Mini Receiver
- 2 x Adhesive Rubbers
Image: The Thinkbee Wireless Switch (left) and its Mini Receiver (right) with wiring. The switch is a white rectangular unit, and the receiver is a smaller white unit with red, blue, and brown wires extending from it.
Safety Information
Observe the following safety precautions:
- Ensure power is disconnected before any installation or wiring.
- Do not exceed the maximum integrated power of 1000W.
- The product is IP66 waterproof, suitable for damp locations, but avoid full submersion unless specified.
- The switch is made of flame-retardant PC material for enhanced safety.
- Operating voltage range is AC 80V-275V.
Image: A white Thinkbee wireless switch partially submerged in a bowl of water, demonstrating its IP66 waterproof rating. A green plant is visible in the background.
Image: A hand holding a lit lighter near the edge of a white Thinkbee wireless switch, illustrating its high temperature flame retardation and safe-to-use PC material.
Setup and Installation
Follow these steps for proper installation of your Thinkbee Wireless Lights Switch Kit.
1. Receiver Installation
The mini receiver should be installed between the device to be controlled (e.g., light fixture) and the power supply. Ensure the power is OFF before wiring.
- Connect the input wires of the receiver to your AC 80V-275V power source.
- Connect the output wires of the receiver to your lighting fixture or other electrical load.
- The receiver is compact and designed to fit easily into control boxes, canopies, distribution boxes, or electrical boxes.
Image: A wiring diagram showing how to connect the Thinkbee wireless receiver. It illustrates the AC 85-270V input connected to the receiver, and the receiver's output connected to multiple lamps (Lamp1, Lamp2, Lamp3), with a maximum load of 10A/1000W. Live and Neutral connections are clearly marked.
2. Wireless Switch Setup
The wireless switch does not require wiring and can be mounted using adhesive or screws.
- Disassemble the panel: Gently pry open the switch panel to access the battery compartment.
- Insert the CR2032 3V battery: Place the included CR2032 battery into the designated slot, ensuring correct polarity.
- Close the cover: Securely reassemble the switch panel.
- Mounting Options:
- Adhesive Patch Mounting: Clean the desired surface thoroughly. Peel off the backing from the adhesive rubbers and firmly press the switch onto the surface.
- Screw Mounting: Use appropriate screws to secure the switch base to the wall or desired location.
Image: A step-by-step visual guide for setting up the Thinkbee wireless switch. It shows disassembling the panel, inserting the CR2032 battery, and two mounting options: adhesive patch mounting and screw mounting.
Operation
Once installed, the Thinkbee Wireless Lights Switch Kit is ready for use.
- Simply press the wireless switch to turn your connected lights or appliances ON or OFF.
- The system offers a strong signal, capable of penetrating walls, with an effective range of up to 328ft indoors and 1969ft outdoors (in open space).
Image: A person holding the Thinkbee wireless switch outdoors, with a house and garden in the background, illustrating the long-range remote control capability (approx. 500 meters in empty space, 100 meters indoors with obstacles).
Multi-Matching and Penetration
The Thinkbee Wireless Lights Switch Kit offers flexible pairing options:
- One Switch Controls One Receiver: A single wireless switch can control one receiver.
- Multiple Switches Control One Receiver: Up to 8 wireless switches can be paired with a single receiver, allowing multiple control points for one lighting fixture or group of fixtures.
- One Switch Controls Multiple Receivers: A single wireless switch can also be paired to control multiple receivers, allowing one switch to control several different lights or groups of lights.
Refer to the program diagram for visual representation of these configurations:
Image: A program diagram illustrating various configurations for the Thinkbee Wireless Switch Kit. (A) shows one switch controlling one receiver. (B) shows two switches controlling one receiver. (C) shows three switches controlling one receiver. (D) shows the integrated load of the wireless receiver (Max 1000W) and notes that lamps can be LED, incandescent, CFLs, exhaust fans, or WiFi devices.
Maintenance
The Thinkbee Wireless Lights Switch Kit is designed for long-term durability with minimal maintenance.
- Cleaning: Wipe the switch and receiver with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: The CR2032 battery in the wireless switch has an estimated life of 6-8 years. Replace the battery when the switch's performance degrades or it stops responding. Follow the "Wireless Switch Setup" steps for battery replacement.
- Longevity: The switch button is rated for 600,000 presses, and the receiver for 400,000 operations.
Troubleshooting
If you encounter issues with your Thinkbee Wireless Lights Switch Kit, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Switch does not control the light. |
|
|
| Reduced signal range. |
|
|
| Light flickers or does not turn on/off consistently. |
|
|
Specifications
| Model Number | SW-SK1&R01 |
| Operating Voltage | AC 80V-275V |
| Maximum Load | 1000W (10 Amps) |
| Indoor Range | Up to 328ft (100 meters) |
| Outdoor Range | Up to 1969ft (500 meters) |
| Waterproof Rating | IP66 |
| Switch Battery | 1 x CR2032 (included) |
| Switch Button Life | 600,000 times |
| Receiver Life | 400,000 times |
| Certifications | CE, FCC, RoHS, CQC |
| Product Dimensions | 2.9 x 1.9 x 0.6 inches (Switch); Receiver dimensions are compact for fitting in junction boxes. |
Warranty and Support
Thinkbee provides a 5-year free replacement service for this product, demonstrating confidence in its quality and durability.
For any questions, technical assistance, or warranty claims, please contact Thinkbee customer service. Friendly 24-hour customer service is available.
You can also visit the official Thinkbee store for more information and support: Thinkbee Store on Amazon
