1. Introduction
Welcome to the assembly guide for your CubicFun 3D Jigsaw Puzzle, the Flying Dutchman model (T4041h). This manual provides comprehensive instructions to help you construct your model ship and understand its unique features, including its glow-in-the-dark capabilities. Please read all instructions carefully before beginning assembly.
2. Product Overview
The CubicFun Flying Dutchman is an intricate 3D jigsaw puzzle designed to recreate the legendary ghost ship. Comprising 360 pieces, this model features detailed craftsmanship and a special glow-in-the-dark finish, allowing it to illuminate in low-light conditions. Once assembled, the model measures approximately 26.8 x 10.3 x 25.2 inches (69 x 24 x 60 cm).
Image: The fully assembled CubicFun Flying Dutchman 3D puzzle, showcasing its intricate design and glow-in-the-dark features.
3. Safety Information
This product is recommended for ages 10 years and up. It contains small parts that may pose a choking hazard for younger children. The puzzle pieces are made from EPS foam board and virgin pulp. During assembly, some glow-in-the-dark material may produce fine flakes or particles. It is advisable to work in a well-ventilated area and consider using a protective layer or masking tape to manage any fallout.
4. Package Contents
Your CubicFun Flying Dutchman 3D Jigsaw Puzzle kit includes:
- Multiple sheets of pre-cut puzzle pieces (360 pieces total)
- Detailed step-by-step instruction manual
Image: The CubicFun Flying Dutchman 3D puzzle kit, showing the product packaging and some of its contents.
5. Setup & Assembly
Assembly of the Flying Dutchman model requires patience and attention to detail. Follow the included step-by-step instructions carefully. No scissors or glue are typically required for assembly, as pieces are designed to interlock. However, for enhanced stability, some users have found it beneficial to apply glue at various connection points, particularly for parts that may not align perfectly, such as the bow or certain rope sections.
Image: A family engaged in assembling a CubicFun 3D puzzle, demonstrating the collaborative and engaging nature of the activity.
Image: A close-up view of the intricately cut puzzle pieces, highlighting the detail and irregular shapes that form the model.
6. Operating Instructions (Glow Feature)
The Flying Dutchman model features a unique glow-in-the-dark effect. To activate this feature, expose the assembled model to a light source (such as sunlight or an LED light) for approximately 10 minutes. After exposure, place the model in a dark room to observe its luminous glow. For optimal brightness, consider using a UV light source for charging the glow-in-the-dark elements.
Image: The CubicFun Flying Dutchman model illuminated with its glow-in-the-dark effect in a dark environment.
Video: A demonstration of the CubicFun Flying Dutchman model's glow-in-the-dark feature, highlighting its eerie illumination.
7. Maintenance
To maintain the appearance and integrity of your Flying Dutchman model:
- Cleaning: Gently dust the model with a soft, dry cloth. Avoid using liquid cleaners, which may damage the material or glow-in-the-dark coating.
- Storage: While the model is sturdy, it is best to handle it with care. If relocating, support the base to prevent damage. Prolonged exposure to direct sunlight may diminish the glow-in-the-dark effect over time.
8. Troubleshooting
If you encounter issues during or after assembly, consider the following:
- Loose Pieces: If certain parts, such as the bow or rigging, do not feel secure, a small amount of craft glue can be applied to reinforce the connections.
- Glow Effect Not Strong: Ensure the model has been exposed to a strong light source for at least 10 minutes. The intensity of the glow depends on the duration and strength of light exposure.
- Flaking Material: If glow-in-the-dark material flakes during assembly, it is a known characteristic. Working on a protected surface and using a lint roller or tape can help manage these particles.
9. Specifications
| Product Dimensions | 26.8 x 10.3 x 25.2 inches (69 x 24 x 60 cm) |
| Item Weight | 3.19 pounds (1.45 kg) |
| Model Number | T4041h |
| Number of Pieces | 360 |
| Recommended Age | 10 years and up |
| Manufacturer | CubicFun Toys Industrial Co., Ltd. |
10. Warranty & Support
CubicFun offers a 100% Quality Guarantee for this product. If you encounter any problems or require assistance, please contact the CubicFun Customer Service Team. They are committed to ensuring your satisfaction and are available to help with any product-related inquiries.
