addlon Floor Lamp with USB, Outlet, and Drawer

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your new addlon Floor Lamp. Designed for convenience and versatility, this lamp features integrated shelving, 2 USB charging ports, 1 power outlet, and a practical storage drawer. The included LED bulb offers three distinct color temperatures to suit various lighting needs.

2. Safety Instructions

• Always unplug the lamp from the power outlet before cleaning, changing the light bulb, or performing any maintenance.
• Do not use with a damaged cord or plug. If the cord or plug is damaged, contact customer support for assistance.
• Ensure the lamp is placed on a stable, level surface to prevent tipping.
• Do not expose the lamp to water or excessive moisture. This product is for indoor use only.
• Use only the specified bulb type and wattage (9W LED bulb).
• Keep children and pets away from the lamp during operation and assembly.
• Do not overload the USB ports or power outlet.

3. Package Contents

Please verify that all components are present before beginning assembly:

• Lamp Frame with Shelves
• White Lampshade
• 9W LED Bulb (3 Color Temperatures)
• Linen Storage Drawer
• Assembly Hardware (screws, tools if included)
• User Manual (this document)

4. Setup and Assembly

Assembly of the addlon Floor Lamp is straightforward and typically takes about 15 minutes. Follow the steps below carefully.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the package contents list.
2. Assemble Frame: Connect the vertical support rods to the base and shelf panels using the provided hardware. Ensure all connections are secure but do not fully tighten screws until the entire frame is assembled.
3. Install Drawer: Slide the linen storage drawer into its designated slot within the frame.
4. Attach Lampshade: Secure the white lampshade to the top section of the lamp frame.
5. Insert LED Bulb: Screw the provided 9W LED bulb into the lamp socket.
6. Final Tightening: Once all components are in place, carefully tighten all screws to ensure stability.
7. Connect Power: Plug the lamp's power cord into a standard 110V AC outlet.

Figure 4.1: Detailed assembly diagram showing the various components and their connection points for the addlon Floor Lamp.

Figure 4.2: The fully assembled addlon Floor Lamp, showcasing its integrated shelves, USB ports, power outlet, and storage drawer.

5. Operating Instructions

5.1. Lamp Operation (3 Color Temperatures)

The addlon Floor Lamp features an LED bulb with three adjustable color temperatures: Warm White (3000K), Cool White (4500K), and Daylight (6000K). To cycle through these temperatures, simply pull the chain switch repeatedly.

• First Pull: Turns on the lamp to Warm White (3000K).
• Second Pull: Changes the light to Cool White (4500K).
• Third Pull: Changes the light to Daylight (6000K).
• Fourth Pull: Turns off the lamp.

The lamp will remember the last selected color temperature if left off for at least 10 seconds.

Figure 5.1: Visual representation of the three available color temperatures: Warm White (3000K), Cool White (4500K), and Daylight (6000K).

Figure 5.2: A close-up view of the 3CCT LED bulb and the pull-chain switch used to control the lamp's power and color temperature settings.

5.2. Charging Station (USB & Outlet)

The lamp is equipped with 2 USB ports and 1 standard power outlet located on the top shelf, providing convenient charging for your electronic devices.

• USB Ports: Connect your USB charging cables to power smartphones, tablets, or other compatible devices.
• Power Outlet: Use the standard outlet for devices requiring AC power, such as laptops or small appliances.

The charging functions operate independently of the lamp light, meaning you can charge devices even when the lamp is turned off.

Figure 5.3: The integrated charging station on the top shelf, featuring two USB ports and one standard power outlet for convenient device charging.

5.3. Storage Drawer and Shelves

Utilize the linen storage drawer and the open shelves for organizing small items, books, or decorative pieces.

• Linen Drawer: Ideal for storing charging cables, remote controls, or other small accessories to keep your space tidy.
• Open Shelves: Provide additional display and storage space for various items.

Figure 5.4: A detailed view of the linen storage drawer, highlighting its functionality for organizing small items.

6. Maintenance

• Cleaning: To clean the lamp, ensure it is unplugged. Wipe the metal and wood surfaces with a soft, dry cloth. For the lampshade, use a lint-free cloth or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
• Bulb Replacement: If the LED bulb needs replacement, ensure the lamp is unplugged and the bulb has cooled down. Unscrew the old bulb and replace it with a new 9W LED bulb (A19 shape recommended).

7. Troubleshooting

If you encounter any issues not listed here or if the problem persists after attempting the solutions, please contact addlon customer support.

8. Specifications

9. Warranty and Support

addlon proudly stands behind all of its products with a 2-year quality support. If you encounter any problems or have questions regarding your addlon Floor Lamp, please do not hesitate to contact addlon customer support directly.

For further assistance, please visit the official addlon store or contact their customer service department. Contact details are typically available on the product packaging or the brand's official website.

Online Store: addlon Store on Amazon