1. Introduction
Thank you for purchasing the EVERYBOT Edge2 Robot Mop. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before using the product and retain it for future reference.
The EVERYBOT Edge2 is a wheel-less robot mop designed for powerful floor cleaning. It features a spin mop cleaning system, low noise operation, and multiple cleaning modes for various floor conditions.
2. Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions.
- Read all instructions before using the appliance.
- Do not allow children to play with the robot mop.
- Use only as described in this manual.
- Do not use on wet surfaces or standing water.
- Do not add hot water or detergents to the water tank. Use only clean, room-temperature water.
- Ensure the power adapter and charging cradle are not damaged.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Do not operate the robot mop in areas where flammable or combustible liquids may be present.
- Unplug the robot mop from the charger when not in use and before cleaning or maintenance.
3. Package Contents
Verify that all items are included in the package:
- EVERYBOT Edge2 Robot Mop
- Instruction Guide (this manual)
- Mop Pads (multiple sets)
- Charging Cradle
- Remote Control
- Power Adapter
Image: The EVERYBOT Edge2 Robot Mop, its remote control, and a pair of mop pads.
4. Product Overview
The EVERYBOT Edge2 features a compact design with two spinning mop pads and an integrated water tank.
Key Features:
- Wheel-Less Design: Applies consistent pressure for effective scrubbing.
- Protruded Mops: Designed to clean edges and corners thoroughly.
- Slim Body (3.5 inches): Allows cleaning under furniture.
- Quiet Operation: Operates at an ultra-low 42 dB noise level.
- Smart Water Supply System: Electronic water pump with a 210 ml tank and 4 adjustable water levels.
- Multiple Cleaning Modes: Auto, Intensive, Focus, Edge, Step, and 50-minute timed cleaning.
- Smart Sensors: 11 sensors for fall and collision prevention.
Image: The robot mop applying 3.2 lbs of downward pressure for effective cleaning.
Image: The protruded mop pads allow for thorough cleaning along edges and baseboards.
Image: The slim 3.5-inch profile of the robot mop enables it to clean under low furniture.
5. Setup
5.1 Initial Charging
- Place the charging cradle on a flat surface against a wall.
- Connect the power adapter to the charging cradle and then to a power outlet.
- Place the EVERYBOT Edge2 onto the charging cradle. Ensure the charging contacts align. The indicator lights on the robot will show charging status.
- Allow the robot mop to fully charge before first use. This typically takes several hours.
5.2 Attaching Mop Pads
- Moisten the mop pads with water and wring them thoroughly to remove excess water.
- Align the mop pads with the rotating disc slots on the bottom of the robot mop.
- Press the mop pads firmly onto the discs until they are securely attached. Ensure they are not too wet, as this can affect operation.
Image: Visual guide for attaching the mop pads correctly to the robot's rotating discs.
5.3 Filling the Water Tank
- Locate the water tank cap on the robot mop.
- Open the cap and fill the 210 ml water tank with clean, room-temperature water.
- IMPORTANT: Do not add hot water or any cleaning detergents to the water tank. This can damage the internal components and void your warranty.
- Securely close the water tank cap.
Image: Illustration of the water tank and remote control options for water level adjustment.
6. Operating Instructions
6.1 Powering On/Off
- To power on, press and hold the power button on the robot or the remote control.
- To power off, press and hold the power button again.
6.2 Using the Remote Control
The remote control allows you to select various cleaning modes and adjust water levels.
Image: The remote control displaying buttons for Auto, Intensive, Edge, Focus, 50min, Step cleaning modes, and water level adjustments.
6.3 Cleaning Modes
Select the appropriate cleaning mode based on your floor conditions and cleaning needs.
- Auto: Standard cleaning mode for general floor maintenance.
- Intensive: For heavily soiled areas, providing a more thorough scrub.
- Focus: Concentrates cleaning on a specific area.
- Edge: Directs the robot to clean along walls and furniture edges.
- Step: Moves the robot in a step-by-step pattern for systematic cleaning.
- 50 Min: Runs for a fixed duration of 50 minutes.
Image: Visual representation of the six distinct cleaning modes and their operational patterns.
6.4 Water Level Adjustment
Use the remote control to select one of the four water supply levels (Dry mode, Level 1, Level 2, Level 3) to control the moisture of the mop pads.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your EVERYBOT Edge2.
7.1 Cleaning Mop Pads
- Remove the mop pads from the robot after each use.
- Rinse them under running water until clean. For deeper cleaning, they can be machine washed with mild detergent.
- Allow mop pads to air dry completely before reattaching.
7.2 Sensor Management
Clean the sensors regularly to ensure proper navigation and obstacle avoidance.
- Power off the robot mop.
- Gently wipe the sensor windows located around the robot's body with a soft, dry cloth.
- Ensure no dust or debris obstructs the sensors.
Image: A user cleaning the side sensors of the robot mop with a cloth, which can resolve certain operational issues.
7.3 Water Tank Care
- After each use, empty any remaining water from the tank.
- Rinse the tank with clean water.
- Allow the tank to air dry to prevent mold or mildew buildup.
8. Troubleshooting
If the robot mop exhibits unusual behavior, such as a flashing red light or persistent error sounds, refer to the following steps:
8.1 General Malfunctions
- Power Off and Restart: Open the cover and press the power switch for more than 3 seconds to power off. Wait a few seconds, then power on again.
- Sensor Check: Ensure all sensors are clean and free from obstructions. Gently wipe them with a soft cloth.
- Mop Pad Attachment: Verify that the mop pads are properly moistened and securely attached to the rotating discs. If they are too wet or loose, the robot may not operate correctly.
- Water Tank Content: Confirm that only clean, room-temperature water has been added to the tank. Hot water or detergents can cause operational issues.
Image: A user cleaning the side sensors of the robot mop with a cloth, and an illustration of powering off the device.
Image: Correct method for attaching mop pads to ensure proper function.
Image: Important warning indicating that hot water and detergents should not be added to the water tank.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | EVERYBOT |
| Model Number | RS350 |
| Special Feature | Edge Cleaning |
| Color | Edge2 Robot Mop (White/Black) |
| Included Components | Instruction Guide, Mop Pads, Charging Cradle |
| Filter Type | Foam |
| Battery Life | 120 minutes |
| Voltage | 3.7 Volts |
| Water Tank Capacity | 210 Milliliters |
| Power Source | Battery Powered |
| Batteries Included | Yes (1 Lithium Ion battery) |
| Control Method | Remote |
| Compatible Devices | Amazon Echo |
| Form Factor | Robotic |
| Product Dimensions | 15.25 x 9.25 x 8.25 inches |
| Item Weight | 3.2 pounds |
10. Warranty and Support
For warranty information and customer support, please refer to the official EVERYBOT website or contact your retailer. Keep your proof of purchase for warranty claims.
For further assistance, you may visit the EVERYBOT Store on Amazon.
