Lenco KCR-190 DAB+/FM Kitchen Radio with Bluetooth User Manual

1. Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your Lenco KCR-190 DAB+/FM Kitchen Radio with Bluetooth. Please read this manual thoroughly before using the device and retain it for future reference. This radio is designed for use in kitchen environments, offering DAB+ and FM radio reception, Bluetooth audio streaming, and additional features such as an alarm, timer, and integrated LED lighting.

2. Safety Instructions

• Read all instructions before operating the device.
• Do not expose the unit to dripping or splashing liquids.
• Ensure proper ventilation; do not block any ventilation openings.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3. Package Contents

Please check that all items listed below are present in your package:

• Lenco KCR-190 DAB+/FM Kitchen Radio
• Remote Control
• Power Adapter
• Mounting Bracket (for under-cabinet installation)
• User Manual (this document)

4. Product Overview

4.1 Front Panel Controls and Display

Image 1: Front view of the Lenco KCR-190 radio, showing the display and main control buttons including Source, Alarm, Volume, Timer/Pair, Menu/Info, Enter/Scan, Preset, and Select.

1. SOURCE: Press to switch between DAB+, FM, and Bluetooth modes.
2. ALARM: Press to set or activate/deactivate alarms.
3. VOLUME - / +: Adjusts the audio volume.
4. TIMER/PAIR: Press to set the kitchen timer. Long press to initiate Bluetooth pairing.
5. MENU/INFO: Access menu options or display station information.
6. ENTER/SCAN: Confirm selections or initiate a scan for radio stations.
7. PRESET: Access or store preset radio stations.
8. SELECT < / >: Navigate through menus or tune radio frequencies.
9. SNOOZE/LIGHTS: Press to snooze an active alarm or to control the integrated LED light.
10. Display: Shows time, station information, menu options, and status indicators.

4.2 Rear Panel Connections

Image 2: Rear view of the Lenco KCR-190 radio, showing the DC 5V IN power input and the integrated antenna cable.

• DC 5V IN: Connect the provided power adapter here.
• Antenna: Integrated wire antenna for radio reception. Ensure it is extended for optimal signal.

4.3 Remote Control

Image 3: The Lenco KCR-190 radio shown with its compact remote control, which allows for convenient operation from a distance.

The included remote control provides convenient access to most functions of the radio. Refer to the remote control diagram in the quick start guide for specific button layouts.

4.4 Mounting Bracket

Image 4: The white mounting bracket for the Lenco KCR-190, designed for secure under-cabinet installation.

The provided mounting bracket allows for space-saving installation under kitchen cabinets. Ensure the mounting surface is sturdy and follow the installation instructions carefully.

5. Setup

1. Unpacking: Carefully remove the radio and all accessories from the packaging.
2. Power Connection: Connect the power adapter to the DC 5V IN port on the rear of the radio, then plug the adapter into a wall outlet.
3. Antenna Adjustment: Extend the integrated wire antenna fully for optimal radio reception. Position it away from other electronic devices to minimize interference.
4. Initial Power On: Press the SOURCE button to turn on the radio. The unit will typically perform an automatic scan for DAB+ stations upon first use.
5. Mounting (Optional): If desired, use the provided mounting bracket to install the radio under a cabinet. Ensure the cabinet material is suitable for drilling and securely fasten the bracket before attaching the radio.

6. Operating Instructions

6.1 Power On/Off

• To turn on the radio, press the SOURCE button.
• To turn off the radio, long press the SOURCE button.

6.2 Mode Selection

Press the SOURCE button repeatedly to cycle through the available modes: DAB+, FM, and Bluetooth.

6.3 DAB+ Radio Operation

1. Switch to DAB+ mode using the SOURCE button.
2. If it's the first time using DAB+ or if you want to rescan, press ENTER/SCAN to initiate a full scan for available stations.
3. Use the SELECT < / > buttons to browse through the list of available stations.
4. Press ENTER/SCAN to select and listen to a station.
5. Storing Presets: While listening to a station, long press the PRESET button. Use SELECT < / > to choose a preset number (1-30), then press ENTER/SCAN to save.
6. Recalling Presets: Short press the PRESET button, then use SELECT < / > to choose a preset and press ENTER/SCAN to listen.
7. Display Information: Press MENU/INFO repeatedly to view different information such as program type, signal strength, time, and date.

6.4 FM Radio Operation

1. Switch to FM mode using the SOURCE button.
2. Auto Scan: Long press ENTER/SCAN to automatically scan and store available FM stations.
3. Manual Tuning: Short press SELECT < / > to fine-tune the frequency. Long press SELECT < / > to automatically search for the next available station.
4. Storing Presets: While listening to a station, long press the PRESET button. Use SELECT < / > to choose a preset number (1-30), then press ENTER/SCAN to save.
5. Recalling Presets: Short press the PRESET button, then use SELECT < / > to choose a preset and press ENTER/SCAN to listen.

6.5 Bluetooth Operation

1. Switch to Bluetooth mode using the SOURCE button. The display will show "Bluetooth Pairing" or similar.
2. On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "KCR-190" from the list of devices to pair.
4. Once paired, you can stream audio from your device to the radio.
5. Use the volume controls on the radio or your connected device to adjust the sound level.

6.6 Clock and Alarm Functions

• Clock Setting: The time is usually automatically synchronized via DAB+ signal. If manual setting is required, refer to the full manual for detailed steps.
• Setting Alarms: Press the ALARM button. Use SELECT < / > to choose Alarm 1 or Alarm 2. Press ENTER/SCAN to configure the alarm time, source (DAB+/FM/Buzzer), and volume.
• Snooze Function: When an alarm sounds, press the SNOOZE/LIGHTS button to temporarily silence it. The alarm will sound again after a set interval.
• Stopping Alarm: Press any button other than SNOOZE/LIGHTS to stop the alarm.

6.7 Timer Function

The KCR-190 includes a kitchen timer:

1. Press the TIMER/PAIR button.
2. Use SELECT < / > to set the desired countdown time (e.g., for cooking).
3. Press ENTER/SCAN to start the timer.
4. An audible alert will sound when the timer reaches zero.

6.8 LED Light Function

The radio features an integrated LED light arc:

• Press the SNOOZE/LIGHTS button to turn the LED light on or off.
• This light can provide additional illumination in your kitchen area.

7. Maintenance

• Cleaning: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: If not in use for extended periods, unplug the radio and store it in a cool, dry place.
• Antenna: Handle the antenna carefully to avoid damage.

8. Troubleshooting

9. Specifications

10. Warranty and Support

Lenco products are manufactured to high quality standards. In the unlikely event of a defect, this product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Lenco website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or spare parts inquiries, please contact Lenco customer service through their official website or the contact information provided in your product documentation.