Product Overview
The AXA Blueline Ebike Taillight is engineered for modern e-bikes, offering a compact and slim design that integrates seamlessly with most luggage carriers. It features advanced Lightguide technology to ensure optimal light distribution for enhanced safety. Side lighting increases visibility to crossing traffic, making the rider more noticeable from various angles. This rear light is compatible with 6-12V E-bike batteries and is built to be shock and water resistant, ensuring durability in various conditions. It includes an integrated reflector and is visible from up to 600 meters away.
Figure 1: Front view of the AXA Blueline Rear Ebike Light, showing its red reflector and clear top section for illumination.
Setup and Installation
Proper installation ensures optimal performance and safety. Follow these steps carefully:
- Compatibility Check: Ensure your e-bike battery system provides 6-12V DC power. The Blueline taillight is designed specifically for this voltage range.
- Mounting Location: The taillight is designed for rear mounting, typically on a luggage carrier. It has a standard mounting distance of 50 mm between the mounting points.
- Secure Mounting: Attach the taillight securely to the designated mounting points on your e-bike's luggage carrier using appropriate screws and hardware (not included unless specified by your e-bike manufacturer). Ensure the light is firmly in place and does not wobble.
- Electrical Connection: Connect the taillight's cable to your e-bike's 6-12V power supply. Refer to your e-bike's manual for specific wiring instructions. Ensure connections are secure and insulated to prevent short circuits and water ingress.
- Cable Management: Route the cable neatly along the bike frame, securing it with cable ties to prevent snagging or damage.
- Functionality Test: After installation, turn on your e-bike's power to verify that the taillight illuminates correctly. Check for consistent brightness and proper function of the integrated reflector.
Operating Instructions
The AXA Blueline Rear Ebike Light operates in conjunction with your e-bike's electrical system.
- Power On/Off: The taillight will typically turn on automatically when your e-bike's electrical system is activated (e.g., when the e-bike is turned on or its lights are switched on via the e-bike's control panel). It will turn off when the e-bike's power is disengaged.
- Visibility: The light is designed to be visible from the rear and sides, enhancing your safety in traffic. The integrated reflector provides passive visibility even when the light is not active.
- Light Settings: This model features 2 settings. These typically refer to on/off states or potentially different brightness levels, depending on your e-bike's control system. Consult your e-bike's manual for how to cycle through these settings if applicable.
Maintenance and Care
To ensure the longevity and optimal performance of your AXA Blueline taillight, follow these maintenance guidelines:
- Cleaning: Regularly clean the lens and housing with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the plastic.
- Inspection: Periodically check the mounting screws for tightness and the electrical connections for any signs of wear or corrosion.
- Water and Shock Resistance: The light is designed to be water and shock resistant. However, avoid submerging it in water or subjecting it to severe impacts, as this could compromise its integrity.
- Storage: If storing your e-bike for an extended period, ensure the taillight is clean and dry.
Troubleshooting
If you encounter issues with your AXA Blueline Rear Ebike Light, consider the following:
- Light Not Illuminating:
- Check the e-bike's power supply: Ensure the e-bike is turned on and its lighting system is activated.
- Verify electrical connections: Inspect the wiring for loose connections, corrosion, or damage. Re-secure or repair as necessary.
- Check voltage: Confirm that the e-bike's output voltage to the light is within the 6-12V range.
- Dim or Flickering Light:
- Inspect wiring for partial shorts or loose connections.
- Ensure the e-bike battery is adequately charged.
- Physical Damage: If the light housing or lens is cracked, its water resistance may be compromised. Replacement may be necessary.
For persistent issues, contact AXA customer support or a qualified e-bike technician.
Specifications
| Brand | AXA |
| Model Number | 93961395US |
| Color | Red |
| Power Source | Battery Powered (6-12V E-bike battery compatible) |
| Water Resistance Level | Water Resistant |
| Mounting Type | Seat Mount / Luggage Carrier Mount (50mm distance) |
| Number of Settings | 2 |
| Auto Part Position | Rear |
| Visibility Range | Up to 600 meters |
| Integrated Reflector | Yes |
| Item Package Dimensions | 9 x 5.5 x 1 inches |
| Package Weight | 3.36 ounces |
| ASIN | B0BTKHDPHB |
| Date First Available | February 9, 2022 |
Warranty and Support
AXA products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty documentation provided with your purchase or visit the official AXA website. For technical support, replacement parts, or further assistance, please contact AXA customer service through their official channels.
Online Resources: For the most up-to-date information, product registration, and frequently asked questions, please visit the official AXA website.
