Introduction
Thank you for purchasing the Proscan PBT225 Bluetooth Rechargeable Wireless Stereo Headphones. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new headphones. Please read this manual thoroughly before using the product to ensure proper functionality and to extend the lifespan of your device.
These headphones are designed to deliver high-quality stereo sound and comfort, allowing you to enjoy music wirelessly from any Bluetooth-enabled smartphone or device. They feature a built-in microphone for hands-free calls and convenient on-headphone controls for volume and track switching.
Package Contents
- Proscan PBT225 Bluetooth Headphones
- Charging Cable (USB)
- 3.5mm AUX Cable
- User Manual
Product Overview
Figure 1: Front view of the Proscan PBT225 headphones, showing the earcups and headband.
Figure 2: Top view of the Proscan PBT225 headphones, illustrating the adjustable headband.
Figure 3: Side view of the Proscan PBT225 headphones, highlighting the earcups and overall profile.
Figure 4: Close-up of the right earcup, showing the DC-5V charging port, control buttons (play/pause, volume up/next track, volume down/previous track), and the power switch.
Figure 5: Close-up of the left earcup, displaying the PROSCAN branding.
Figure 6: The headphones in a folded position, showing both earcups and the controls on the right earcup, including the 3.5mm AUX input.
Controls and Ports:
- Power Switch: ON/OFF slider.
- DC-5V Port: Micro USB port for charging.
- Play/Pause Button: Central button for media playback control and call management.
- Volume Up / Next Track Button: Increases volume with short press, skips to next track with long press.
- Volume Down / Previous Track Button: Decreases volume with short press, skips to previous track with long press.
- 3.5mm AUX Jack: For wired connection to non-Bluetooth devices.
- Built-in Microphone: For hands-free calling.
Setup
Charging the Headphones:
- Locate the DC-5V charging port on the right earcup.
- Connect the provided USB charging cable to the headphones and plug the other end into a USB power source (e.g., computer USB port, USB wall adapter).
- The LED indicator will illuminate (color may vary, typically red) to show that the headphones are charging.
- Once fully charged, the LED indicator will change color or turn off (refer to specific product behavior for exact indication). A full charge typically takes 2-3 hours.
Note: It is recommended to fully charge the headphones before first use.
Powering On/Off:
- To Power On: Slide the power switch to the "ON" position. You will hear an audible prompt, and the LED indicator will flash (typically blue) to indicate it's powered on and ready for pairing.
- To Power Off: Slide the power switch to the "OFF" position. You will hear an audible prompt, and the LED indicator will turn off.
Operating Instructions
Bluetooth Pairing:
- Ensure the headphones are fully charged and powered off.
- Slide the power switch to the "ON" position. The headphones will automatically enter pairing mode, indicated by a flashing blue and red LED (or similar pattern).
- On your Bluetooth-enabled device (smartphone, tablet, laptop), go to the Bluetooth settings.
- Turn on Bluetooth and search for available devices.
- Select "PBT225" (or similar name) from the list of found devices.
- Once successfully paired, the LED indicator on the headphones will typically flash blue slowly or remain solid blue, and you will hear a confirmation tone.
- If prompted for a password, enter "0000" (four zeros).
Note: The headphones will automatically attempt to reconnect to the last paired device when powered on, if that device's Bluetooth is active and within range.
Music Playback:
- Play/Pause: Press the central Play/Pause button once to play or pause music.
- Volume Up: Short press the "+" button to increase volume.
- Volume Down: Short press the "-" button to decrease volume.
- Next Track: Long press the "+" button to skip to the next track.
- Previous Track: Long press the "-" button to go to the previous track.
Call Management:
- Answer/End Call: Press the central Play/Pause button once to answer an incoming call or end an ongoing call.
- Reject Call: Long press the central Play/Pause button to reject an incoming call.
- Redial Last Number: Double-press the central Play/Pause button to redial the last dialed number.
Using AUX Input (Wired Mode):
- Ensure the headphones are powered off.
- Connect one end of the provided 3.5mm AUX cable to the AUX jack on the headphones.
- Connect the other end of the AUX cable to the 3.5mm audio output of your device (e.g., MP3 player, computer).
- The headphones will automatically switch to wired mode. In this mode, the on-headphone controls (volume, track, call) may not function, and control will be via the connected device.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
- Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To preserve battery life, charge the headphones regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.
- Water Exposure: These headphones are not water-resistant. Avoid exposure to water, rain, or excessive moisture.
- Handling: Do not drop, disassemble, or attempt to repair the headphones yourself. This may void the warranty and cause damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Battery is low or dead. | Charge the headphones fully. |
| Cannot pair with Bluetooth device. | Headphones not in pairing mode; Bluetooth on device is off; device too far; interference. | Ensure headphones are in pairing mode (flashing blue/red LED). Turn Bluetooth off and on again on your device. Move headphones closer to the device. Clear previous Bluetooth connections on your device. |
| No sound or low volume. | Volume too low on headphones or device; headphones not connected; incorrect audio output selected. | Increase volume on both headphones and connected device. Ensure headphones are properly paired/connected. Check audio output settings on your device. |
| Sound distortion or intermittent connection. | Device too far; interference; low battery. | Move headphones closer to the device. Avoid obstacles between headphones and device. Charge the headphones. |
| Microphone not working. | Microphone muted on device; headphones not selected as audio input. | Check microphone settings on your device. Ensure headphones are selected as the input device for calls. |
Specifications
| Model Name | PBT225 |
| Bluetooth Version | 4.0 |
| Bluetooth Profile | A2DP |
| Bluetooth Range | Up to 10 meters (33 feet) without obstacles |
| AUX In | 3.5mm Jack |
| Battery Type | Built-in Rechargeable Lithium-Ion |
| Microphone | Built-in |
| Connectivity Technology | Wireless (Bluetooth), Wired (3.5mm AUX) |
| Color | Black |
| Ear Placement | On Ear |
| Manufacturer | Curtis International |
Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or contact the manufacturer directly.
Manufacturer: Curtis International
Please retain your proof of purchase for warranty claims.
Safety Information
- Do not use the headphones at excessively high volumes for prolonged periods, as this may cause hearing damage.
- Do not use the headphones while driving, cycling, or operating machinery where the inability to hear ambient sounds could be dangerous.
- Keep the headphones away from children and pets.
- Dispose of the product and its battery responsibly according to local regulations. Do not dispose of batteries in fire.
