havit HV-H2002d Gaming Headset User Manual

Introduction

Thank you for choosing the havit HV-H2002d Gaming Headset. This manual provides essential information for setting up, operating, and maintaining your headset to ensure optimal performance and longevity. Please read this manual thoroughly before use.

Package Contents

Upon unboxing, please verify that all items listed below are present:

01 x HV-H2002d Headphone
01 x Detachable Microphone
01 x Adapter (P3 to 2 x P2)

havit HV-H2002d Gaming Headset, front view

Image: The havit HV-H2002d Gaming Headset with its detachable microphone.

Setup Instructions

Follow these steps to connect your havit HV-H2002d Gaming Headset to your device.

Attach the Microphone: Gently insert the detachable microphone into the designated port on the left earcup until it clicks into place.
Connect to Device:
- For devices with a single 3.5mm audio jack (P3): Plug the headset's 3.5mm jack directly into your device's audio port. This is common for most modern gaming controllers (Xbox ONE, PS4), laptops, and mobile phones.
- For devices with separate audio and microphone jacks (2 x P2): Use the included P3 to 2 x P2 adapter. Plug the headset's 3.5mm jack into the adapter, then plug the adapter's two P2 plugs (one for audio, one for microphone) into the corresponding ports on your PC or other device.
USB Connection (for RGB lighting): If your headset features RGB lighting, connect the USB cable to an available USB port on your device. This connection is solely for powering the lighting effects and is not required for audio or microphone functionality.

havit HV-H2002d Gaming Headset with microphone attached

Image: The headset with its detachable microphone connected, ready for use.

Operating Instructions

This section details the basic operation of your havit HV-H2002d Gaming Headset.

Volume Control: The headset features an in-line volume control wheel located on the cable. Rotate the wheel up to increase volume and down to decrease volume.
Microphone Mute: An in-line switch allows you to quickly mute or unmute the microphone. Ensure the microphone is unmuted for voice communication.
Adjusting the Headset: The headband is adjustable. Extend or retract the earcups to achieve a comfortable fit over your ears. The earcups are designed for an over-ear fit with memory foam and protein PU for comfort during extended use.
Microphone Positioning: Position the flexible microphone boom approximately 2-3 cm from your mouth for optimal voice clarity.

Side view of havit HV-H2002d Gaming Headset showing earcup and microphone

Image: Side view of the headset, highlighting the earcup design and microphone placement.

Maintenance

Proper care and maintenance will extend the life of your headset.

Cleaning: Use a soft, dry cloth to wipe down the earcups and headband. For stubborn dirt, a slightly damp cloth with mild soap can be used, but ensure no liquid enters the speaker grilles or microphone. Do not use harsh chemicals or abrasive cleaners.
Storage: Store the headset in a clean, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the headset.
Cable Care: Avoid sharp bends or excessive pulling on the cables. When storing, coil the cables loosely.
Microphone Care: When not in use, you may detach the microphone for safer storage or to prevent damage.

Troubleshooting

If you encounter issues with your headset, refer to the following common solutions:

Problem	Possible Cause / Solution
No sound from headset	Ensure the 3.5mm jack is fully inserted into the device. Check the in-line volume control and increase the volume. Verify device audio settings to ensure the headset is selected as the output device. If using the adapter, ensure both P2 plugs are correctly inserted into the audio output and microphone input ports.
Microphone not working	Ensure the microphone is securely attached to the headset. Check the in-line microphone mute switch and ensure it is unmuted. Verify device audio settings to ensure the headset microphone is selected as the input device. If using the adapter, ensure the microphone P2 plug is correctly inserted into the microphone input port.
RGB lighting not working	Ensure the USB cable is securely connected to a powered USB port on your device.
Sound quality is poor or distorted	Check for loose connections. Test the headset with another device to rule out device-specific issues. Adjust volume levels on both the headset and the device.

Specifications

Key technical specifications for the havit HV-H2002d Gaming Headset:

Model: HV-H2002d
Brand: havit
Ear Placement: On Ear
Form Factor: Over Ear
Audio Driver Size: 53 mm
Impedance: 64 Ohms
Frequency Response: 20 Hz - 20 KHz
Sensitivity: 110 dB
Connectivity: Wired (3.5mm Jack, USB for RGB)
Microphone: Detachable
Control Type: Volume Control, Microphone Mute Switch
Material: Plastic, Faux Leather, Aluminium
Weight: 238 Grams
Compatible Devices: Cellphones, Desktops, Gaming Consoles (Xbox ONE, PS4), Laptops, Tablets
Country of Origin: China

Warranty Information

The havit HV-H2002d Gaming Headset comes with a 1-year warranty provided by the manufacturer from the date of purchase. Please retain your proof of purchase for warranty claims. This warranty covers manufacturing defects and does not cover damage caused by misuse, accidents, or unauthorized modifications.

Support and Contact Information

For technical support, warranty claims, or further inquiries, please contact:

Manufacturer: Guangzhou Havit Technology Company Limited
Manufacturer Contact: +86 19872771006, sales58@havit.com.cn
Importer (India): Origin Marketing Private Limited
Importer Contact (India): 022 40224087, service@originmarketing.in

Please have your product model number (HV-H2002d) and proof of purchase ready when contacting support.