AEG ULTIMATE 5000 CLEAN AS52CB21DB Cordless Vacuum Cleaner User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your AEG ULTIMATE 5000 CLEAN AS52CB21DB Cordless Vacuum Cleaner. Please read these instructions carefully before using the appliance and retain them for future reference.

2. Safety Information

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

• Do not use the vacuum cleaner outdoors or on wet surfaces.
• Do not allow the vacuum cleaner to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not handle the charger or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without dust bin and/or filters in place.
• Exercise extra care when cleaning on stairs.
• Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing the appliance.

3. Package Contents

Verify that all components are present in the packaging:

• 1 x AEG ULTIMATE 5000 CLEAN Cordless Vacuum Cleaner
• 1 x Hygiene Filter
• 1 x Furniture Brush
• 1 x Telescopic Crevice Nozzle
• 1 x Charging Station
• User Manual (this document)

4. Setup

4.1 Assembly

1. Unpack all components from the box.
2. Attach the main vacuum body to the floor nozzle by aligning the connectors and pushing firmly until it clicks into place.
3. Place the charging station in a convenient location near a power outlet. The vacuum cleaner is designed to be freestanding.

4.2 Initial Charging

Before first use, fully charge the vacuum cleaner's battery.

1. Place the assembled vacuum cleaner onto the charging station.
2. Connect the charging station to a power outlet.
3. The battery indicator lights on the vacuum cleaner will illuminate to show charging status. A full charge takes approximately 4.5 hours.
4. Once fully charged, the indicator lights will show a steady full charge.

5. Operating Instructions

5.1 Powering On/Off

Press the power button located on the handle to turn the vacuum cleaner on or off.

5.2 Using as a Stick Vacuum

For general floor cleaning, use the vacuum in its upright stick configuration. The UltimatePower multi-floor nozzle is designed for optimal suction on various surfaces.

5.3 Using as a Handheld Vacuum (2-in-1 Function)

The vacuum features a detachable handheld unit for versatile cleaning tasks.

1. Press the release button on the main body to detach the handheld unit.
2. Attach the desired accessory (furniture brush or telescopic crevice nozzle) to the handheld unit.
3. Use the handheld unit for cleaning upholstery, car interiors, shelves, or other hard-to-reach areas.
4. To reattach, align the handheld unit with the main body and push until it clicks securely into place.

5.4 Automatic Suction Power Adjustment

The vacuum cleaner automatically adjusts its suction power based on the surface being cleaned, optimizing performance and battery life.

5.5 LED Front Light

The floor nozzle is equipped with an LED front light to illuminate dark areas, making dust and debris more visible for thorough cleaning.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.

6.1 Emptying the Dust Bin

Empty the dust bin regularly, especially when it reaches the 'MAX' fill line, to maintain strong suction.

1. Ensure the vacuum cleaner is turned off.
2. Press the dust bin release button and remove the dust bin.
3. Open the dust bin lid and empty contents into a waste bin.
4. Reattach the dust bin until it clicks into place.

6.2 Cleaning the Filters

The hygiene filter should be cleaned periodically to prevent clogging and maintain suction power.

1. Remove the dust bin as described above.
2. Carefully remove the filter assembly from the dust bin.
3. Tap the filter gently over a waste bin to remove loose dust. If heavily soiled, rinse the filter under cold running water.
4. Allow the filter to air dry completely for at least 24 hours before reinserting. Do not use a dryer or other heating methods.

6.3 BrushRollClean Function

The UltimatePower multi-floor nozzle features a BrushRollClean function to easily remove tangled hair and fibers from the brush roll.

1. Ensure the vacuum cleaner is turned off.
2. Press the BrushRollClean pedal (usually located on the top of the floor nozzle) for 5-10 seconds while the vacuum is running.
3. The internal blade will cut and remove tangled hair, which is then vacuumed into the dust bin.

6.4 Battery Care

To prolong battery life, avoid fully discharging the battery frequently. Store the vacuum cleaner in a cool, dry place when not in use.

7. Troubleshooting

If you encounter issues with your vacuum cleaner, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact AEG customer support.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or visit the official AEG website. For technical support, spare parts, or service inquiries, please contact AEG customer service directly.

You can typically find contact information on the AEG official website or in your product registration materials.