Introduction
Thank you for choosing the SONGMICS 4-Tier Shoe Rack. This manual provides essential information for the safe assembly, proper use, and maintenance of your new shoe storage solution. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The fully assembled SONGMICS 4-Tier Shoe Rack, showcasing its design and capacity in a home setting.
Safety Information
- Connectors: For easier assembly, especially in colder environments, place plastic connectors in warm water for several minutes before use. This makes them more pliable and helps prevent breakage.
- Cleaning: Avoid using wet cloths to clean the product. Refer to the Maintenance section for proper cleaning instructions.
- Disassembly/Reassembly: Exercise caution when disassembling and reassembling the shoe rack to prevent damage to the connectors.
- Load Capacity: Do not exceed the maximum static load capacity of 11 lb (5 kg) per tier and 44 lb (20 kg) total.
Setup and Assembly
The SONGMICS 4-Tier Shoe Rack is designed for easy and quick assembly. All necessary parts are labeled and separated for your convenience.
Parts List:
Please refer to the included instruction manual for a detailed list of all components. Ensure all parts are present before beginning assembly.
Assembly Steps:
- Prepare Connectors: If needed, soften plastic connectors by placing them in warm water for a few minutes.
- Assemble Frame: Connect the metal tubes using the plastic connectors to form the side frames.
- Attach Fabric Shelves: Slide the non-woven fabric shelves onto the assembled frame sections. Ensure they are taut and properly seated.
- Complete Structure: Continue connecting the frame and shelves until the 4-tier structure is complete.

Image: Visual guide illustrating the straightforward assembly process with individually packaged and labeled parts.

Image: A close-up view of the metal tube components, highlighting their construction.

Image: A comparison demonstrating the quality and sturdiness of the plastic connectors used in the shoe rack.
Assembly Video:
Video: An official review and overview of the SONGMICS shoe racks, including assembly tips and features for 2, 3, and 4-tier models.
Operating Instructions
This shoe rack is designed for organizing various types of footwear in hallways, closets, or other living spaces.
Capacity and Spacing:
- Each tier can comfortably hold 4-5 pairs of shoes, accommodating a total of 16-20 pairs for the 4-tier model.
- The standard spacing between shelves is 6.7 inches (17 cm), suitable for most sneakers and standard shoes.

Image: A detailed diagram illustrating the dimensions of the shoe rack and the maximum weight capacity per tier.

Image: A visual comparison demonstrating the wider design of this shoe rack compared to others, allowing for more pairs of shoes per tier.
Flexible Configuration:
For taller footwear such as boots, one or more fabric shelves can be removed to increase the vertical space between tiers. This allows for customized storage to fit various shoe types.

Image: A diagram illustrating how shelves can be removed to accommodate taller items like boots, increasing the vertical clearance.
Maintenance and Care
To ensure the longevity and appearance of your shoe rack, follow these simple maintenance guidelines:
- Cleaning: Wipe the metal tubes and non-woven fabric shelves with a dry cloth. For stubborn dirt, a slightly damp cloth can be used on the fabric, but avoid excessive moisture. Do not use abrasive cleaners or harsh chemicals.
- Moving: Due to its lightweight design, the shoe rack can be easily moved. When relocating, lift the unit rather than dragging it to prevent stress on the connectors.
- Environmental Conditions: Store the shoe rack in a dry environment to prevent moisture damage to the fabric and metal components.

Image: A close-up demonstrating the water-resistant and easy-to-clean properties of the non-woven fabric shelves.
Troubleshooting
If you encounter any issues with your SONGMICS 4-Tier Shoe Rack, please refer to the following common solutions:
- Wobbly Structure: Ensure all metal tubes are fully inserted into the plastic connectors. Gently press down on each shelf to secure connections.
- Difficulty Assembling: If connectors are too stiff, warm them in hot water for a few minutes to increase flexibility before attempting to insert tubes.
- Missing Parts: Double-check the packaging. If parts are genuinely missing, contact customer support with your model number and purchase details.
- Shelf Sagging: Ensure the weight on each shelf does not exceed the 11 lb (5 kg) limit. Distribute weight evenly.
Specifications
| Model Number | ULSH054B01 |
| Color | Black |
| Material | Metal Tube, Non-Woven Fabric, Plastic Connector |
| Product Dimensions (D x W x H) | 11" x 38.8" x 29.5" (28 x 98.5 x 75 cm) |
| Spacing Between Shelves | 6.7" (17 cm) |
| Product Weight | 2.6 lb (1.2 kg) |
| Max. Static Load Capacity per Tier | 11 lb (5 kg) |
| Max. Static Load Capacity Total | 44 lb (20 kg) |
| Number of Tiers | 4 |
| Mounting Type | Floor Mount |

Image: A close-up view of a dumbbell on a shelf, visually representing the 11 lb (5 kg) weight capacity per tier.
Warranty Information
SONGMICS products are manufactured with quality and durability in mind. For specific warranty details regarding your 4-Tier Shoe Rack, please refer to the warranty card included with your purchase or visit the official SONGMICS website. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact SONGMICS customer support. You can typically find contact information on the packaging, the official SONGMICS website, or through your retailer's support channels.
For more information and product updates, visit the SONGMICS Store on Amazon.