1. Introduction
Thank you for choosing the YUNYODA Solar Outdoor Wall Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new solar lights. Please read these instructions thoroughly before use and retain them for future reference.
2. Product Overview
The YUNYODA Solar Outdoor Wall Lights are designed to provide ambient lighting for outdoor spaces such as patios, gardens, fences, and walls. They feature a durable, waterproof design and operate automatically from dusk till dawn.
Package Contents:
- 4 x YUNYODA Solar Outdoor Wall Lights
- Mounting Screws
- Expansion Tubes
- Double-sided adhesive stickers (optional installation method)
Image 2.1: YUNYODA Solar Outdoor Wall Lights (4-pack) and their application on a house exterior.
3. Key Features
- Warm White Illumination: Emits a soft 3000K warm white light for a pleasant ambiance.
- Energy-Saving & Automatic Operation: Fully solar-powered, no electricity costs. Features an automatic dusk-to-dawn sensor.
- IP65 Waterproof Rating: Constructed from high-strength ABS material, ensuring durability and protection against various weather conditions including rain, snow, and heat.
- Easy Installation: No wiring required. Can be mounted using screws or double-sided adhesive.
- Durable Design: Thickened transparent glass design and energy-saving LED lamps for enhanced longevity.
Image 3.1: IP65 Waterproof and Weather Resistance.
4. Setup and Installation
4.1 Initial Activation and Charging
- Before first use, locate the ON/OFF switch on the back of the light.
- Switch the light to the "ON" position. The solar panel only charges when the switch is in the "ON" position.
- Place the solar light in a location that receives direct sunlight for at least 6-8 hours to ensure a full charge.
Image 4.1: Product features and switch location.
4.2 Choosing an Installation Location
Select a location where the solar panel can receive maximum direct sunlight throughout the day. Avoid areas under eaves, trees, or other obstructions that might block sunlight or cast shadows on the solar panel.
Image 4.2: Optimal placement for solar charging.
4.3 Mounting Instructions
The lights can be installed using screws or double-sided adhesive stickers.
Method 1: Screw Mounting
- Mark the desired installation spot on the wall, fence, or post.
- Drill two holes at the marked positions.
- Insert the expansion tubes into the drilled holes.
- Align the light's mounting holes with the expansion tubes.
- Secure the light using the provided mounting screws. Ensure the drainage hole is correctly positioned downwards.
Method 2: Adhesive Mounting (for smooth surfaces)
- Clean the surface thoroughly where the light will be mounted, ensuring it is dry and free of dust or grease.
- Apply the double-sided adhesive stickers to the back of the solar light.
- Press the light firmly onto the desired surface for a few seconds to ensure good adhesion.
Image 4.3: Two easy installation methods.
5. Operating Instructions
Once installed and fully charged, the YUNYODA Solar Outdoor Wall Lights operate automatically.
- During the day, the integrated solar panel absorbs sunlight and converts it into electrical energy, which is stored in the internal battery.
- At dusk, the light sensor detects the decrease in ambient light and automatically switches the LEDs on.
- The lights will remain illuminated for approximately 8-10 hours on a full charge.
- At dawn, the light sensor detects the increase in ambient light and automatically switches the LEDs off, resuming the charging cycle.
Image 5.1: Automatic dusk-to-dawn operation and charging times.
6. Maintenance
To ensure optimal performance and longevity of your solar lights, follow these maintenance guidelines:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures efficient charging.
- Clear Obstructions: Periodically check that no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight from reaching the solar panel.
- Battery Life: The integrated battery is designed for long-term use. If the light duration significantly decreases over time, it may indicate the battery is reaching the end of its lifespan. Battery replacement is generally not user-serviceable for this product type.
- Storage: If storing the lights for an extended period, ensure they are fully charged and switch them to the "OFF" position. Store them in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. |
|
|
| Light duration is shorter than expected. |
|
|
| Light flickers or is dim. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | YUNYODA |
| Model Number | Z2558DQXV0WD11H |
| Dimensions (L x W x H) | 8.9 x 5.9 x 2.3 cm (3.5 x 2.3 x 0.9 inches) |
| Weight | 300 g (per unit) |
| Material | Polycarbonate (PC), ABS, Aluminum (lampshade) |
| Housing Color | Black |
| Light Color Temperature | Warm White (3000K) |
| Power Source | Solar Powered |
| Wattage | 5 Watts |
| Luminous Flux | 200 Lumens |
| Waterproof Rating | IP65 |
| Charging Time | 6-8 hours (direct sunlight) |
| Working Time | Approx. 8-10 hours (on full charge) |
| Installation Type | Wall Mount |
9. Warranty and Support
Information regarding specific warranty terms and customer support contact details is not provided in the product data. For warranty claims or technical assistance, please refer to the seller's information on the purchase platform or contact YUNYODA directly through their official channels if available.
Please retain your proof of purchase for any warranty-related inquiries.