1. Product Overview
The VIMAR 30016.B Linea Illuminated Switch is a 2-pole, 20 AX, 250 V~ switch designed for controlling lighting circuits. It features an illuminable function and is suitable for lamps with integrated power supplies, supporting up to 250W (IEC 60669-1:2017). This switch is part of the Vimar Linea series, known for its sleek design and tactile finish.
Key Features:
- Absolute flatness and total alignment between the switch and plaque, with minimal protrusion for easy detection.
- Slim profile: 5.7mm thickness, even on technopolymer materials.
- Sensory effect: Velvet touch finish, resistant to scratches and dirt, ensuring durability.
- Patented coupling mechanism for precise installation and simple removal from the front.
- Backlight: Offers various options for a refined and distinctive illuminated effect.
2. Safety Information
WARNING: Electrical installation should only be performed by qualified personnel. Incorrect installation can lead to electric shock, fire, or serious injury.
- Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing the switch.
- Ensure all wiring connections are secure and comply with local electrical codes.
- Do not exceed the specified electrical ratings (20 AX, 250 V~, Max 250W for integrated power supply lamps).
- This product is designed for indoor use only.
- Keep children away from electrical components during installation.
3. Package Contents
Verify that all components are present before beginning installation:
- 1 x VIMAR 30016.B Linea Illuminable Switch, White
4. Installation
This section provides general guidelines for installing the VIMAR 30016.B Linea Illuminated Switch. For detailed wiring diagrams and specific installation requirements, consult a qualified electrician and refer to local electrical codes.
Tools Required:
- Screwdriver (appropriate type for terminal screws)
- Wire strippers
- Voltage tester
Installation Steps:
- Power Disconnection: Turn off the power to the circuit at the main service panel (circuit breaker or fuse box) before starting any work. Verify power is off using a voltage tester.
- Remove Old Switch (if applicable): Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires, noting their connections.
- Prepare Wiring: Strip approximately 1/2 inch (12-15 mm) of insulation from the ends of the circuit wires.
- Connect Wires: Connect the circuit wires to the terminals on the VIMAR 30016.B switch. Ensure connections are tight and secure. The switch is a 2-pole type, meaning it interrupts both live and neutral conductors or two live conductors in a multi-phase system. Consult the specific wiring diagram provided with the product packaging for correct terminal identification.
- Mount the Switch: Carefully fold the wires into the electrical box and secure the switch to the box using the provided screws.
- Install Wall Plate: Attach the decorative wall plate over the switch. The Vimar Linea series features a patented coupling mechanism for maximum installation accuracy.
- Restore Power: Turn the power back on at the main service panel.
- Test Functionality: Test the switch to ensure it operates correctly and the illumination functions as expected.
Product Dimensions for Installation Reference:
Image: Technical drawing illustrating the dimensions of the VIMAR 30016.B switch. The side view shows a total depth of 38.7 mm, with a mounting depth of 30.4 mm. The front view shows a width of 22.3 mm and a height of 52.9 mm. These measurements are crucial for ensuring proper fit within standard electrical boxes and with compatible faceplates.
5. Operation
The VIMAR 30016.B Linea Illuminated Switch operates as a standard electrical switch with an added illumination feature.
- Switching Function: Press the top or bottom of the switch rocker to toggle the connected light fixture or appliance ON or OFF.
- Illumination: The switch includes a backlight feature. Depending on the wiring configuration and specific model variant, the illumination may indicate the ON/OFF status of the circuit or serve as a locator light in the dark.
6. Maintenance
The VIMAR 30016.B switch requires minimal maintenance to ensure long-lasting performance and appearance.
- Cleaning: To clean the switch and wall plate, gently wipe with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the velvet-coated finish.
- Inspection: Periodically inspect the switch for any signs of damage, loose connections, or unusual operation. If any issues are detected, disconnect power and consult a qualified electrician.
7. Troubleshooting
If you experience issues with your VIMAR 30016.B Linea Illuminated Switch, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn ON/OFF | No power to the circuit Loose wiring connection Faulty bulb/fixture | Check circuit breaker/fuse. Ensure all wires are securely connected (power off first!). Test with a known working bulb/fixture. |
| Switch illumination not working | Incorrect wiring for illumination Faulty illumination component | Verify wiring against installation instructions. Contact a qualified electrician for inspection or replacement. |
| Switch feels loose in wall box | Mounting screws not tight | Tighten mounting screws securely (power off first!). |
If the problem persists after attempting these solutions, disconnect power and contact a qualified electrician or Vimar customer support.
8. Specifications
| Attribute | Specification |
|---|---|
| Model Number | 30016.B |
| Brand | Vimar |
| Type | Linea Illuminated Switch |
| Poles | 2P |
| Current Rating | 20 AX |
| Voltage Rating | 250 V~ |
| Max Load (Lamps with integrated power supply) | 250W (IEC 60669-1:2017) |
| Color | White |
| Material | Plastic |
| Product Dimensions (L x W) | 2.08" x 1.52" (52.9mm x 38.7mm approx.) |
| Exterior Finish | Velvet Coated |
| Special Feature | Backlight |
| Item Weight | 0.05 Kilograms (1.76 ounces) |
| Projection Distance | 5.7 Millimeters |
9. Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Vimar website. Keep your proof of purchase for warranty claims.
For technical assistance or further inquiries, please contact Vimar customer service or your authorized retailer.
