1. Important Safety Information
Please read all instructions carefully before installation and use. Retain this manual for future reference.
- Ensure the electrical outlet is a Ground Fault Circuit Interrupter (GFCI) 110V outlet and is within 3 feet of the toilet.
- Verify water pressure is at least 35 PSI for optimal flushing performance.
- Do not expose the product to excessive moisture or water spray beyond normal bathroom use.
- Disconnect power before performing any maintenance or cleaning.
2. Package Contents
Verify all components are present before beginning installation:
- EPLO DP7 Smart Toilet Unit
- Remote Control
- Mounting Accessory Kit (1 pc)
- Mounting Template cardboard
- T-valve (1 pc)
- User Manual (this document)
- Wax Ring (1 pc)
- Sealing Flange (1 pc)
3. Product Overview
The EPLO DP7 is a tankless smart toilet designed for enhanced hygiene and comfort. Key features include automatic lid opening/closing, a heated seat, bidet functions, and various flushing options.
4. Installation Guide
This section provides instructions for installing your EPLO DP7 Smart Toilet. Professional installation is recommended.
4.1 Pre-Installation Checks
- Rough-in Measurement: Ensure your bathroom has a standard 12-inch (305mm) rough-in.
- Water Supply: The toilet requires a 1/2-inch accessory connection type. Confirm your water supply line is compatible.
- Electrical Outlet: A dedicated 120V GFCI outlet is required within 3 feet of the toilet's installation location.
- Water Pressure: Minimum water pressure of 35 PSI is necessary for proper flushing and bidet operation.
4.2 Installation Steps
- Prepare the Area: Turn off the water supply to the existing toilet and remove it. Clean the flange area thoroughly.
- Position the Sealing Flange and Wax Ring: Place the provided sealing flange and wax ring over the drain opening.
- Set the Toilet: Carefully lower the EPLO DP7 toilet onto the flange, aligning it with the bolts. Due to its weight (approximately 107.8 lbs), this may require two people.
- Secure the Toilet: Use the mounting accessory kit to firmly secure the toilet to the floor.
- Connect Water Supply: Connect the 1/2-inch water supply line to the T-valve and then to the toilet's water inlet. Ensure all connections are tight to prevent leaks.
- Connect Power: Plug the toilet's power cord into the dedicated 120V GFCI outlet.
- Test Functions: Turn on the water supply and power. Allow the toilet to fill and perform initial self-tests. Test all flushing and bidet functions.
5. Operating Instructions
The EPLO DP7 Smart Toilet offers multiple convenient operating features.
5.1 Automatic Lid Open/Close
The lid automatically opens when a user approaches and closes after use. This feature can also be controlled via the remote control or by a foot kick sensor.
5.2 Bidet Functions
The hygienic stainless steel nozzle provides various wash options:
- Rear Wash: For posterior cleansing.
- Female Wash: A softer, wider spray for feminine hygiene.
- Moving Wash: The nozzle oscillates for a broader cleaning area.
- Warm Water Wash: Water temperature is adjustable for comfort.
The nozzle performs an auto-clean before and after each use and is movable for easy manual cleaning.
5.3 Heated Seat & Warm Dryer
- Heated Seat: The seat temperature is adjustable for comfort.
- Warm Dryer: After washing, a warm air dryer provides comfort. Air speed and temperature are adjustable.
5.4 Flushing Options
The DP7 offers multiple flushing methods:
- Remote Control Flush: Use the provided remote to initiate a flush.
- Press Knob Flush: A knob on the side of the toilet allows for manual flushing.
- Foot Kick Flush: A sensor at the base allows for hands-free flushing by gently kicking the sensor.
- Off-Seat Auto Flush: The toilet automatically flushes when the user stands up and moves away.
The toilet utilizes Siphonic Jet Flushing technology for efficient cleaning with 1.28 gallons per flush (GPF).
5.5 Night Light
An integrated night light guides you in the dark, enhancing safety and convenience during nighttime use.
5.6 Blackout Flushing
In the event of a power outage, the built-in backup battery allows for flushing by pressing the knob on the side of the toilet.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your EPLO DP7 Smart Toilet.
6.1 Cleaning the Exterior
Wipe the exterior surfaces with a soft, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the finish.
6.2 Nozzle Cleaning
The nozzle performs an automatic self-cleaning cycle. For deeper cleaning, the nozzle is movable and can be gently wiped with a soft cloth and mild cleaner. Do not use excessive force or sharp objects.
6.3 Filter Maintenance
Periodically check the water inlet filter for any debris or mineral buildup. If clogged, carefully remove and clean it under running water. Reinstall securely.
6.4 Long-Term Storage
If the toilet will not be used for an extended period, turn off the water supply and unplug the unit. Drain any remaining water from the toilet bowl and bidet system to prevent freezing or stagnation.
7. Troubleshooting
Refer to this section for common issues and their solutions.
- Toilet Not Flushing or Weak Flush:
- Check water supply: Ensure the water supply valve is fully open.
- Check water pressure: Insufficient water pressure (below 35 PSI) can cause weak flushing. Consult a plumber if your home's water pressure is consistently low.
- Power supply: Ensure the toilet is properly plugged into a working GFCI outlet. - Bidet Not Functioning:
- Check water supply: Ensure water is flowing to the toilet.
- Check power: Verify the toilet is powered on.
- Nozzle obstruction: Inspect the nozzle for any blockages. - Lid Not Opening/Closing Automatically:
- Sensor obstruction: Ensure the sensor area is clean and unobstructed.
- Power cycle: Unplug the toilet for 30 seconds and then plug it back in to reset the system. - Heated Seat/Dryer Not Working:
- Check power: Ensure the toilet is receiving power.
- Settings: Verify that the heated seat and dryer functions are enabled and set to the desired temperature/speed via the remote control. - LED Display Not Showing Temperature:
- The LED display indicates real-time water/seat temperature. If it's not visible, ensure the toilet is powered on.
If the issue persists after attempting these solutions, please contact EPLO Customer Support.
8. Specifications
| Feature | Specification |
|---|---|
| Model | DP7 |
| Product Dimensions | 26.9"D x 15.5"W x 19.4"H |
| Rough-In | 12 Inches |
| Material | Ceramic (Toilet), ABS, Stainless Steel (Seat/Nozzle) |
| Installation Type | Floor Mounted |
| Voltage | 120 Volts |
| Water Consumption | 1.28 Gallons per Flush (GPF) |
| Flush Type | Automatic, Siphonic Jet |
| Item Weight | 107.8 pounds |
| Certifications | ETL listed, CUPC, CEC, SIAA |
| Special Features | Auto Open/Close, Heated Seat, Tankless, Automatic Flush, Kick Flush, Soft Close, Night Light, Warm Wash, Warm Dryer, LED Display, Remote Control, Backup Battery for Blackout Flushing |
9. Warranty Information
EPLO products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact EPLO Customer Support directly. Keep your proof of purchase for warranty claims.
10. Customer Support
For technical assistance, troubleshooting, or parts inquiries, please contact EPLO Customer Support. You can typically find contact information on the EPLO brand website or through your purchase platform.
When contacting support, please have your product model (DP7) and purchase details ready.
