Introduction
Thank you for choosing the Mubarek LED Desk Lamp Model XH09. This manual provides essential information for the safe and efficient use of your new desk lamp. Please read these instructions carefully before use and retain them for future reference.
The Mubarek LED Desk Lamp Model XH09 is designed to provide versatile and eye-caring illumination for various tasks and environments. It features 15 lighting modes, combining 3 brightness levels with 5 color temperatures, and delivers 500 lumens of soft, flicker-free light. Its adjustable and foldable design ensures space-saving convenience, while touch controls and a 1-minute auto-timer enhance user experience. The lamp is USB powered for flexible placement.
Product Components
- Mubarek LED Desk Lamp (Model XH09)
- USB Power Cable
- User Manual
Note: A USB power adapter is not included and must be supplied by the user.
Setup Instructions
- Unpack the Lamp: Carefully remove all components from the packaging. Ensure all parts listed in the 'Product Components' section are present.
- Position the Lamp: Place the lamp base on a stable, flat surface such as a desk or table.
- Connect Power: Insert the small end of the provided USB cable into the USB port on the back of the lamp base. Connect the larger end of the USB cable to a compatible USB power source (e.g., a USB wall adapter, computer USB port, or power bank).
Figure 1: The Mubarek LED Desk Lamp can be powered via various USB sources, including a wall adapter, power bank, PC, or laptop, using the included USB cable.
Operating Instructions
Controls Overview
Figure 2: The lamp features two touch-sensitive buttons for control: the Power button and the Mode ('M') button.
- Power Button (⏻): Controls power and brightness.
- Mode Button (M): Controls color temperature.
Power On/Off and Brightness Adjustment
- To Turn On: Short press the Power button (⏻).
- To Adjust Brightness: After turning on, short press the Power button (⏻) repeatedly to cycle through 3 brightness levels (low, medium, high).
- To Turn Off: Continue pressing the Power button (⏻) until the lamp turns off, or long press for 3 seconds to activate the timer.
Color Temperature Adjustment
- To Adjust Color Temperature: Short press the Mode button (M) repeatedly to cycle through 5 color temperatures (3000K warm, 3500K warm white, 4000K natural white, 4500K cool white, 5000K daylight).
Figure 3: The lamp offers 3 brightness levels and 5 distinct color temperatures for various lighting needs.
1-Minute Auto-Timer
- To Activate Timer: While the lamp is on, long press the Power button (⏻) for 3 seconds. The light will flash 3 times to confirm the timer is set.
- Function: The lamp will automatically turn off after 1 minute. This feature is useful for bedtime reading or when you need a temporary light source.
Figure 4: The 1-minute auto-timer is ideal for energy saving, especially when used as a bedside lamp.
Adjustable and Foldable Design
The lamp features a multi-angle design for optimal light positioning and space-saving storage.
- Lamp Holder: Adjusts up to 90 degrees.
- Lamp Head: Adjusts 180 degrees horizontally and 180 degrees vertically.
These adjustments allow you to direct light precisely where needed and fold the lamp flat for compact storage or portability.
Figure 5: The lamp's adjustable joints allow for flexible positioning and compact folding.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your Mubarek LED Desk Lamp.
- Cleaning: Use a soft, dry cloth to wipe the lamp's surfaces. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Storage: When not in use for extended periods, fold the lamp into its compact position and store it in a dry, dust-free environment.
- Safety: Do not attempt to disassemble or repair the lamp yourself. Refer all servicing to qualified personnel. Keep the lamp away from water and high humidity.
Troubleshooting
If you encounter any issues with your Mubarek LED Desk Lamp, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply or loose connection. | Ensure the USB cable is securely connected to both the lamp and a working USB power source. Try a different USB port or adapter. |
| Light flickers or is unstable. | Unstable power supply or faulty connection. | Use a stable power source. Check the USB cable for damage. If the issue persists, contact customer support. |
| 1-minute timer does not activate. | Power button not pressed long enough. | Ensure you long press the Power button (⏻) for approximately 3 seconds until the light flashes. |
If the problem persists after attempting these solutions, please contact Mubarek customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | XH09 |
| Light Source Type | LED |
| Number of LED Beads | 44 |
| Lumen Output | 500 Lumens |
| Brightness Levels | 3 (Dimmable) |
| Color Temperatures | 5 (3000K, 3500K, 4000K, 4500K, 5000K) |
| Control Method | Touch Control |
| Special Features | Dimmable, Adjustable, Foldable, 1-Minute Auto-Timer, Eye-Caring (Flicker-Free, Non-Glare) |
| Power Source | Corded Electric (USB Powered) |
| Product Dimensions | 15"D x 4"W x 2"H (Folded/Base) |
| Item Weight | 1.15 pounds (0.52 Kilograms) |
| Material | Metal, Wood |
| Color | Black |
Warranty and Support
The Mubarek LED Desk Lamp Model XH09 comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Mubarek customer service through the retailer where the product was purchased or visit the official Mubarek website for contact information.
Please retain your purchase receipt as proof of purchase for warranty purposes.