Ankilo Projection Alarm Clock User Manual

Introduction

Thank you for choosing the Ankilo Projection Alarm Clock. This digital alarm clock is designed to provide convenient timekeeping with advanced features including a 180° adjustable projection, large LED display, USB charging port, and integrated temperature and humidity display. This manual will guide you through the setup, operation, and maintenance of your new alarm clock to ensure optimal performance and longevity.

Ankilo Professional Projection Alarm Clock with icons for features like 12/24H, projection, temperature, brightness, dual alarm, night mode, auto sensitivity, snooze, humidity.

Image: Overview of the Ankilo Projection Alarm Clock highlighting its key features.

Safety Information

Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
Keep the device away from water or other liquids.
Use only the provided USB cable for power. The USB charger is not included.
Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
Ensure the device is placed on a stable, flat surface to prevent tipping.

Package Contents

Please check the package for the following items:

1 x Projection Alarm Clock
1 x USB Cable (Length: 59 inches / 1.5m)
1 x Instruction Manual
1 x CR2032 Memory Battery (pre-installed)

Image showing the package contents: a projected alarm clock, instructions, a USB cable, and a memory battery.

Image: Contents included in the product package.

Product Overview

Familiarize yourself with the various parts and controls of your alarm clock.

Diagram of the alarm clock showing the front display with time, temperature, and humidity, and the back with buttons labeled SNOOZE/LIGHT, ALARM, MODE, UP, PROJECT, DOWN, Speaker, Projection lamp, and Power port.

Image: Front and back view of the alarm clock with labeled components.

Display Screen: Shows time, temperature, humidity, and alarm icons.
Projection Lamp: Projects time onto a wall or ceiling.
SNOOZE/LIGHT Button: Activates snooze, adjusts display brightness.
ALARM Button: Sets and activates alarms.
MODE Button: Switches between time, date, and alarm settings.
UP Button: Increases values, switches 12/24H format.
DOWN Button: Decreases values.
PROJECT Button: Adjusts projection brightness and orientation.
USB Charging Port: 5V/1A output for charging external devices.
Power Port: Connects to USB power source.
Detachable Stand: Provides stable base for the clock.

Setup

Follow these steps for initial setup:

Connect Power: Connect the provided USB cable to the clock's power port and plug the other end into a 5V/1A USB power adapter (not included). The LED screen will light up.
Battery Backup: The built-in CR2032 coin cell battery (included) remembers time settings during power outages.

Video: A demonstration on how to set up and operate the Projection Alarm Clock, including time and date settings.

Operating Instructions

Setting Time (12/24H)

Long press the "MODE" button to enter time setting mode. The 12/24H format will flash.
Press "UP" or "DOWN" to select 12-hour or 24-hour format.
Press "MODE" again. The hour digits will flash. Press "UP" or "DOWN" to adjust the hour.
Press "MODE" again. The minute digits will flash. Press "UP" or "DOWN" to adjust the minute.
Press "MODE" to confirm and exit time setting.

Image showing the clock display switching between 12-hour and 24-hour formats.

Image: Visual representation of 12-hour and 24-hour time display options.

Setting Date

From time display mode, press "MODE" once to enter date display mode.
Long press "MODE" to enter date setting. The year will flash. Press "UP" or "DOWN" to adjust the year.
Press "MODE" again. The month will flash. Press "UP" or "DOWN" to adjust the month.
Press "MODE" again. The day will flash. Press "UP" or "DOWN" to adjust the day.
Press "MODE" to confirm and return to time display.

Adjusting Display Brightness

The clock display has 4 adjustable brightness levels.

In time display mode, short press the "SNOOZE/LIGHT" button to cycle through brightness levels: Bright, Medium, Low, OFF.

Image showing the clock display at four different brightness levels: Bright Light, Medium Light, Low Light, and OFF.

Image: Four adjustable brightness levels for the main display.

Night Mode

The clock can automatically dim the display during night hours.

By default, the clock automatically enters a low-light state from 18:00 to 5:59.
To activate/deactivate Night Mode or adjust its time range, refer to the detailed instructions in the included paper manual.

Image illustrating the clock in Night Mode, with a note that brightness is automatically dimmed from 18:00 to 5:59 by default.

Image: The clock operating in Night Mode with automatic dimming.

Setting Alarm

The alarm clock offers three alarm modes:

1-5: Monday to Friday
1-6: Monday to Saturday
1-7: Everyday (Monday to Sunday)

Press the "ALARM" button once to view the current alarm time.
Long press the "ALARM" button to enter alarm setting mode. The hour digits will flash.
Press "UP" or "DOWN" to adjust the alarm hour.
Press "ALARM" again. The minute digits will flash. Press "UP" or "DOWN" to adjust the alarm minute.
Press "ALARM" again. The alarm mode (1-5, 1-6, 1-7) will flash. Press "UP" or "DOWN" to select your desired alarm mode.
Press "ALARM" to confirm and exit alarm setting.

Image showing three alarm modes: Monday to Friday, Monday to Saturday, and Everyday.

Image: Visual representation of the three available alarm modes.

Snooze Function

When the alarm sounds, press the "SNOOZE/LIGHT" button to activate the snooze function. You can get 1 to 60 minutes of extra sleep time. To cancel the alarm, press any other button.

Image: Demonstrating the easy snooze function.

Projection Function

The clock can project the time onto your ceiling or wall. The projection distance is optimal between 1.6ft and 16ft (0.5m to 5m).

Adjusting Projection Brightness: Short press the "PROJECT" button to cycle through 3 levels of projection brightness: Bright, Dim, OFF.
Adjusting Projection Orientation: The projection lamp can be rotated 180° to adjust the angle of the projected time.

Image showing the projection distance from 1.6ft to 16ft, 3 levels of projection brightness (OFF, Dim, Bright), and a diagram illustrating the 180° flip projection feature.

Image: Details on projection distance, brightness, and 180° flip projection.

Image showing three levels of projection brightness: Bright, Dim, and OFF, with the projected time on a wall.

Image: Visual demonstration of the three projection brightness levels.

Important Note on Projection Direction: The projector alarm clock can only project towards the back of the alarm clock. If you project forward, the numbers will appear reversed. Ensure the clock is positioned correctly for a readable projection.

Diagram showing correct and incorrect projection directions. The correct projection is backward from the clock, while forward projection results in reversed numbers.

Image: Correct and incorrect projection directions for optimal readability.

USB Charging Port

The clock includes a 5V/1A USB output interface on the side, allowing you to charge your cellphone, tablets, or other electronic devices while the clock is powered.

Maintenance

Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Keep the projection lens clean for clear projection.
If the clock will not be used for an extended period, disconnect it from power.

Troubleshooting

Problem	Possible Cause / Solution
Display is blank.	Ensure the USB cable is securely connected to a power source. Check if the display brightness is set to OFF (press SNOOZE/LIGHT button to adjust).
Projected time is upside down or reversed.	The projector is designed to project backward from the clock. If you are projecting forward (e.g., from a nightstand to a wall in front of the clock), the numbers will appear reversed. Adjust the clock's position so the projection is directed towards the back (e.g., towards the ceiling above the clock). The projection lens can be rotated 180° to adjust the angle, but not the orientation of the numbers themselves relative to the clock's front.
Alarm does not sound.	Ensure the alarm is set correctly and the volume is not muted (if applicable). Check the alarm mode (1-5, 1-6, 1-7) to ensure it's set for the desired days.
Time is inaccurate.	Reset the time following the "Setting Time" instructions. If the issue persists, ensure a stable power supply.
USB charging port not working.	Ensure the clock is powered via the USB cable. The charging port requires the clock to be actively powered. Check the connected device's charging cable.

Specifications

Feature	Detail
Brand	Ankilo
Model Number	WA112
Color	Black
Display Type	Digital
Product Dimensions	4.33"W x 1.65"H
Power Source	Corded Electric, Battery Powered (CR2032 backup)
Special Features	Adjustable Brightness, Temperature Display, Humidity Display, USB Charging Port, 180° Projector, Snooze, Night Mode
Material	Plastic
Item Weight	7.8 ounces

Warranty and Support

Ankilo is committed to providing high-quality products. This product comes with a Lifetime Warranty. For any questions, concerns, or technical support, please contact Ankilo customer service through the platform where you purchased the product or refer to the contact information provided in your product packaging.

Warranty Type: Lifetime
Customer Service: Refer to your purchase platform or product packaging for contact details.

Ankilo WA112