Vente-unique RAVENA Sliding Glass Partition 120x105 cm Instruction Manual

1. Product Overview

The Vente-unique RAVENA Sliding Glass Partition is designed to elegantly divide interior spaces while allowing light to pass through. Constructed from tempered glass and powder-coated aluminum, this partition offers both functionality and a modern industrial aesthetic. Its sliding mechanism provides flexibility, allowing you to open or close the space as needed.

Figure 1.1: Overall view of the Vente-unique RAVENA Sliding Glass Partition. This image displays the full partition with its black aluminum frame and clear glass panels, designed to separate interior spaces.

2. Safety Information

Please read all safety instructions carefully before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Always wear appropriate personal protective equipment (e.g., gloves, safety glasses) during assembly.
• Handle glass panels with extreme care to prevent breakage and injury.
• Ensure the installation surface (wall) is structurally sound and capable of supporting the partition's weight. The minimum recommended wall thickness is 6 mm.
• Keep children and pets away from the assembly area.
• Do not attempt to modify the product. Use only original parts and accessories.
• Ensure all screws and fasteners are securely tightened after assembly.

3. Package Contents

Verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact Vente-unique customer support.

• Aluminum frame components (powder-coated black)
• Tempered glass panels (4 mm thick)
• Sliding rail system
• Mounting hardware (screws, anchors, etc.)
• Assembly instructions (this document)

4. Specifications

Figure 4.1: Technical drawing illustrating the dimensions of the RAVENA Sliding Glass Partition, including length, height, depth, and opening width.

5. Setup and Assembly Instructions

This product requires self-assembly. Follow these general steps. Refer to the detailed diagrams provided in your physical assembly guide for specific component identification and fastening instructions.

1. Preparation: Unpack all components and verify against the package contents list. Clear the assembly area and ensure it is clean and level. Gather necessary tools (e.g., screwdriver, drill, level, measuring tape).
2. Frame Assembly: Assemble the aluminum frame sections according to the provided diagrams. Ensure all connections are secure.
3. Rail Installation: Mount the sliding rail system to the designated wall or opening. Use a level to ensure the rails are perfectly horizontal for smooth operation. Ensure the wall meets the minimum thickness requirement of 6 mm.
4. Glass Panel Insertion: Carefully insert the tempered glass panels into the assembled frame and sliding mechanism. Follow the specific sequence indicated in the detailed guide to avoid damage.
5. Final Adjustments: Once all panels are in place, check for smooth sliding operation. Make any necessary adjustments to the rail system or panel alignment.
6. Secure Fasteners: Double-check that all screws and fasteners are tightened to ensure stability and safety.

6. Operating Instructions

The RAVENA Sliding Glass Partition is designed for simple and smooth operation.

• To open the partition, gently grasp the edge of a sliding panel and push it along the rail.
• To close the partition, pull the panel back along the rail until it meets the adjacent panel or frame.
• Avoid forcing the panels. If resistance is encountered, inspect the track for obstructions or misalignment.

Figure 6.1: A hand demonstrating the smooth operation of the sliding glass panel, highlighting the ease of opening and closing the partition.

Figure 6.2: Detailed view of the sliding mechanism and bottom track, showing the components responsible for the partition's smooth movement.

7. Maintenance

Regular maintenance will ensure the longevity and optimal performance of your RAVENA Sliding Glass Partition.

• Cleaning Glass: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive materials that could scratch the glass.
• Cleaning Frame: Wipe the aluminum frame with a soft cloth dampened with mild soap and water. Dry thoroughly. Do not use abrasive cleaners or solvents.
• Track Maintenance: Periodically clean the sliding tracks to remove dust, dirt, or debris that could impede smooth operation. A vacuum cleaner with a narrow attachment can be effective.
• Lubrication: If the sliding mechanism becomes stiff, a small amount of silicone-based lubricant can be applied to the rollers or track. Avoid oil-based lubricants that can attract dirt.
• Inspection: Regularly inspect all fasteners and connections to ensure they remain tight. Tighten any loose screws as needed.

8. Troubleshooting

Here are solutions to common issues you might encounter:

9. Warranty and Support

For warranty information, please refer to the purchase documentation or contact your retailer. Vente-unique provides customer support for product inquiries and assistance with assembly or parts. Please visit the official Vente-unique website or contact their customer service for further details.

Vente-unique Official Website: www.vente-unique.com