Teka WMT40841 Washing Machine User Manual

1. Setup and Installation

1.1 Unpacking

Carefully remove all packaging materials from the washing machine. Inspect the appliance for any signs of damage during transit. Retain packaging for future transport if necessary.

1.2 Placement

Position the washing machine on a firm, level surface. Ensure there is adequate space around the appliance for ventilation and door opening. The door opens to an angle of approximately 135 degrees.

Front view of the Teka WMT40841 washing machine, showcasing its stainless steel finish and front-load design.

Side view diagram illustrating the dimensions of the washing machine, including a depth of 52.7 cm.

Diagram showing the washing machine door opening to an angle of 135 degrees, indicating required clearance.

1.3 Water Connection

Connect the inlet hose (length 1470 mm) to a cold water supply tap. Ensure all connections are tight to prevent leaks. Position the drain hose (length 1635 mm) into a suitable drain pipe or sink, ensuring it is securely fixed and not kinked.

1.4 Electrical Connection

Plug the appliance into a grounded electrical outlet. The washing machine operates on 220-240V at 50Hz, with a maximum power consumption of 2100W. The power cable length is 160 cm. Do not use extension cords or adapters.

1.5 Leveling

Adjust the front and rear adjustable feet to ensure the washing machine is perfectly level. This prevents excessive vibration and noise during operation.

1.6 Initial Use

Before washing laundry, run a short wash cycle (e.g., a quick rinse program) without any clothes or detergent to clean the drum and internal components.

2. Operating Instructions

2.1 Control Panel Overview

The control panel features a program selector dial, a digital display, and various function buttons for temperature, spin speed, delay start, speed wash, and easy iron.

Close-up view of the Teka WMT40841 washing machine's control panel, showing the program dial and digital display.

Detailed view of the digital display and function buttons, including Temp, Centrifugado, Delay Start, Speed Wash, and Fácil.

2.2 Loading Laundry

Open the door and load laundry into the stainless steel drum. Do not exceed the maximum capacity of 8 kg. Ensure items are not trapped in the door seal before closing.

The Teka WMT40841 washing machine with its door open, ready for loading laundry.

Close-up view of the stainless steel drum interior, designed for efficient washing.

2.3 Adding Detergent

Add the appropriate amount of detergent and fabric softener to the respective compartments in the dispenser drawer. Refer to detergent packaging for dosage recommendations.

2.4 Program Selection

Turn the program selector dial to choose one of the 15 available wash programs. Options include:

• Super Rápido: 15-minute quick wash.
• Rápido: 60-minute quick wash.
• Algodón: Standard cotton cycle.
• Eco: Energy-saving program.
• Lana: Wool program.
• Delicados: For delicate fabrics.
• Antialérgico: Allergy-safe program.

Adjust temperature (8 settings available) and spin speed (up to 1400 RPM) using the corresponding buttons.

2.5 Starting a Cycle

Press the Start/Pause button to begin the selected wash cycle. The automatic door lock will engage. The digital display will show the remaining time.

2.6 Special Functions

• Child Lock: Prevents accidental changes to settings during operation.
• Delay Start: Postpone the start of the wash cycle.
• Speed Wash: Reduces wash time for certain programs.
• Cancel Spin Cycle: Allows you to stop the spin cycle if needed.

3. Maintenance

3.1 Cleaning the Exterior

Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.

3.2 Cleaning the Drum

The stainless steel drum is designed for durability. Periodically run a high-temperature wash cycle without laundry and with a descaling agent to maintain cleanliness and prevent odors.

3.3 Detergent Dispenser Cleaning

Remove the detergent dispenser drawer and rinse it under running water to clear any residue. Clean the housing of the dispenser drawer with a brush.

3.4 Drain Pump Filter

Regularly clean the drain pump filter, typically located at the bottom front of the machine. This prevents blockages and ensures proper drainage. Refer to the full manual for specific instructions on accessing and cleaning the filter.

4. Troubleshooting

Before contacting customer service, review the following common issues and solutions:

• Machine does not start: Ensure the power cord is plugged in, the door is fully closed, and a program has been selected. Check if the child lock is active.
• Water not draining: Check if the drain hose is kinked or blocked. Clean the drain pump filter.
• Excessive vibration or noise: Verify the machine is level and all transport bolts have been removed. Ensure the laundry load is balanced.
• Water leakage: Check all hose connections for tightness. Inspect the detergent dispenser for blockages.
• Error codes on display: Consult the full product manual for specific error code meanings and recommended actions.

If problems persist after attempting these solutions, contact Teka customer support.

5. Specifications

The energy label for the Teka WMT40841 washing machine, indicating an energy efficiency class B, 55 kWh/100 cycles, 48 liters/cycle, and 76 dB spin noise. For more details, visit the EPREL database.

6. Warranty and Support

This Teka washing machine comes with a standard manufacturer's warranty. Please refer to the warranty card included with your appliance for specific terms and conditions, including coverage duration and limitations.

For technical assistance, spare parts, or to schedule a service appointment, please contact Teka customer support. Keep your purchase receipt and model number (WMT40841) readily available when contacting support.