Axial AX24 XC-1 4WS Crawler Brushed RTR Instruction Manual

1. Safety Information

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

2. What's in the Box

The Axial AX24 XC-1 4WS Crawler Brushed RTR package includes:

• 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Orange
• Transmitter
• Battery
• Charger

Image: The complete package contents, including the Axial AX24 XC-1 RC truck, its remote control transmitter, a rechargeable battery, and a USB charger.

3. Features

The Axial AX24 XC-1 4WS Crawler is designed with several key features for optimal performance:

• Three 4-wheel steering (4WS) modes: Provides enhanced maneuverability for navigating challenging terrain.
• Side plate chassis: Engineered for greater articulation, improving handling over rough surfaces.
• LED rock lights: Mounted in the rock sliders to illuminate the path in low-light conditions.
• Rockster wheels and Rock Lizards tires: Designed to deliver superior traction on various trails.
• Ready-to-Run (RTR): Fully equipped for immediate use, requiring no additional purchases.

Image: Chassis-mounted LED rock lights providing illumination.

Image: Detailed view of the oversized Rock Lizards tire and Rockster wheel.

4. Setup

1. Charge the Battery: Connect the included USB charger to a suitable USB power source. Connect the battery to the charger. The charger's LED will indicate charging status (refer to charger manual for specific indications). Ensure the battery is fully charged before first use.
2. Install the Battery: Carefully open the battery compartment on the vehicle. Insert the fully charged battery, ensuring correct polarity. Securely close the battery compartment.
3. Transmitter Setup: Install the required batteries into the transmitter (typically AA batteries, not always included, but the product description states "Includes Everything Needed"). Power on the transmitter.
4. Binding (if necessary): The vehicle and transmitter are typically pre-bound from the factory. If re-binding is required, refer to the detailed instructions in the full product manual for the specific binding procedure.
5. Pre-Run Check: Before operating, ensure all screws are tight, wheels are securely attached, and steering functions correctly.

Image: The Axial AX24 XC-1 ready for operation after setup.

5. Operating Instructions

The Axial AX24 XC-1 features advanced 4-wheel steering capabilities. Familiarize yourself with the transmitter controls before operating in challenging environments.

5.1. Transmitter Controls

• Steering Wheel: Controls front wheel direction.
• Throttle Trigger: Controls forward and reverse movement, and speed.
• 4WS Mode Switch: Allows selection between different 4-wheel steering modes.

5.2. 4-Wheel Steering Modes

The AX24 XC-1 offers three distinct 4-wheel steering modes:

1. Front Steer: Standard steering where only the front wheels turn. Ideal for general driving and higher speeds.
2. 4-Wheel Steer: Both front and rear wheels turn in the same direction, allowing for tighter turns and improved maneuverability in confined spaces.
3. Crabwalk: Front and rear wheels turn in opposite directions, enabling the vehicle to move diagonally. Useful for navigating obstacles sideways.

5.3. Driving Tips

• Start slowly to get a feel for the controls, especially the 4WS modes.
• Practice in open areas before attempting challenging terrain.
• Observe the vehicle's articulation and adjust steering input to maintain balance over obstacles.
• Avoid prolonged operation in water or extreme mud to prevent damage to electronics.

Image: The Axial AX24 XC-1 demonstrating its crawling capabilities on rocky terrain.

6. Maintenance

Regular maintenance ensures the longevity and performance of your Axial AX24 XC-1.

• Cleaning: After each use, especially in dirty or dusty conditions, clean the vehicle with a soft brush or compressed air. Avoid using water directly on electronics.
• Lubrication: Periodically check moving parts, such as universal joints and gears, for wear and lubricate as needed with RC-safe grease or oil.
• Inspections: Regularly inspect all screws, linkages, and suspension components for looseness or damage. Tighten or replace as necessary.
• Battery Care: Always store batteries in a cool, dry place. Do not overcharge or over-discharge LiPo batteries. Follow all battery safety guidelines.
• Tire Inspection: Check tires for wear and tear. Ensure they are securely mounted to the wheels.

Image: The chassis of the Axial AX24 XC-1, highlighting areas for inspection and maintenance.

7. Troubleshooting

8. Specifications

9. Warranty

For detailed warranty information, please refer to the official Axial or Horizon Hobby website, or the warranty card included with your product. Warranty terms and conditions may vary by region and product type.

10. Support

For technical assistance, spare parts, or further inquiries, please visit the official Axial support website or contact Horizon Hobby customer service. You can find contact information and FAQs on their respective websites.

• Axial Official Website
• Horizon Hobby Support