Nathan James Virgo Wood Accent Storage Console Sofa Table Instruction Manual

1. Introduction

This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Nathan James Virgo Wood Accent Storage Console Sofa Table. Please read these instructions carefully before assembly and retain them for future reference. The Virgo Console Table is designed to offer functional and stylish storage in various living spaces, including entryways, hallways, and living rooms.

2. Safety Information

Always assemble the product on a soft, clean surface to prevent scratches.
Ensure all connections are securely fastened before use. Periodically check and retighten fasteners as needed.
Do not overload the table. Refer to the 'Specifications' section for maximum weight recommendations.
Keep small parts and packaging materials away from children and pets to prevent choking hazards.
Use caution when moving the assembled table to avoid injury or damage.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

Tabletop (1)
Side Panels (2)
Bottom Shelf (1)
Faux Wedge Through Tenon Pieces (2)
Assembly Hardware (Screws, Brackets)
Assembly Guide (1)

4. Assembly Instructions

Assembly is estimated to take approximately 30 minutes. A screwdriver is recommended for assembly (not included).

Prepare the Workspace: Clear a spacious area and lay out all components on a soft, protective surface to prevent damage.
Attach Side Panels to Tabletop: Carefully align the side panels with the pre-drilled holes on the underside of the tabletop. Secure them using the provided screws and brackets. Ensure the faux wedge through tenon slots are facing outwards.
Install Bottom Shelf: Slide the bottom shelf into the designated slots on the inner sides of the side panels. Ensure it is level and fully seated. Secure with screws if applicable.
Insert Faux Wedge Through Tenon: Insert the decorative faux wedge through tenon pieces into the corresponding slots on the exterior of the side panels. These pieces enhance the table's aesthetic and provide additional stability.
Final Tightening: Once all components are in place, gently tighten all screws to ensure the table is stable and secure. Do not overtighten.

Close-up of the faux wedge through tenon joint on the table leg. — Figure 4.1: Detail of the faux wedge through tenon joint, a key design element for stability and aesthetics.

Close-up of the table's base and top, highlighting the sturdy construction and smooth finish. — Figure 4.2: View of the table's base and top, illustrating the robust design and the absence of exposed hardware.

5. Operating Instructions

The Virgo Console Table is designed for versatile use in various home settings.

Placement: Position the table in your entryway, hallway, or behind a sofa in your living room. Its narrow design makes it suitable for spaces where larger furniture might not fit.
Top Shelf Usage: The top surface is ideal for displaying decorative items such as lamps, accent mirrors, photo frames, or small plants.
Bottom Shelf Usage: The lower shelf provides additional storage space for items like baskets, books, magazines, or even shoes, helping to keep your area organized.

Nathan James Virgo Console Table in a living room setting, adorned with a vase and framed pictures. — Figure 5.1: The Virgo Console Table serving as an accent piece in a living room, showcasing its two-tier design.

Nathan James Virgo Console Table in an entryway, decorated with a lamp and books. — Figure 5.2: The console table positioned in an entryway, demonstrating its utility for decorative items and storage.

6. Maintenance and Care

To ensure the longevity and appearance of your Virgo Console Table, follow these care instructions:

Cleaning: Wipe the table with a dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners, which can damage the wire-brushed finish.
Spills: Immediately blot any spills with a clean, dry cloth to prevent staining.
Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the wood finish.
Heat and Moisture: Use coasters under hot or wet items to protect the surface from heat marks and moisture damage.

Close-up of the table's light brown wire-brushed wood finish. — Figure 6.1: Detailed view of the table's wire-brushed light brown finish, emphasizing its texture and quality.

7. Troubleshooting

If you encounter any issues with your console table, refer to the following common solutions:

Wobbling Table: Check all assembly screws and ensure they are tightened. If the floor is uneven, place felt pads or shims under the legs to stabilize the table.
Scratches/Minor Damage: For minor scratches, wood repair markers or furniture polish designed for light brown wood finishes may be used.
Difficulty Assembling: Re-read the assembly instructions carefully. Ensure all parts are correctly oriented before tightening screws. Do not force components together.

8. Specifications

Feature	Detail
Brand	Nathan James
Model Name	Bohemian Farmhouse Console Table
Model Number	37301
Product Dimensions (D x W x H)	14"D x 40"W x 29"H
Item Weight	40 Pounds
Maximum Weight Recommendation	170 Pounds
Color	Virgo Light Brown
Material Type	Engineered Wood
Furniture Finish	Brown Finish (Wire-brushed)
Product Care Instructions	Wipe with Dry Cloth
Tools Recommended For Assembly	Screw Driver
Includes All Assembly Tools	No

Diagram showing the dimensions of the Nathan James Virgo Console Table: 40 inches wide, 13.8 inches deep, and 29.4 inches high. — Figure 8.1: Product dimensions for the Virgo Console Table.

9. Warranty and Support

Your Nathan James Virgo Wood Accent Storage Console Sofa Table comes with a Lifetime Manufacturer Warranty.

If you have any questions, require assistance with assembly, or need to report a quality issue, please contact Nathan James customer support:

Website: www.nathanjames.com
Email: support@nathanjames.com
Phone: Refer to the Nathan James website for current contact numbers.

Please have your model number (37301) and purchase information ready when contacting support.

	Virgo Console Table Assembly Instructions \| Nathan James SKU 37301 Step-by-step assembly guide for the Nathan James Virgo Console Table (SKU 37301). Includes parts list, tools needed, and safety information for building your new console table.
	Nathan James Audrey Sofa Assembly Instructions & Guide Step-by-step guide to assembling the Nathan James Audrey Sofa (SKU 27301). Includes parts list, assembly steps, and care instructions.
	Nathan James Kensi End Table Assembly Instructions and Product Information Detailed assembly instructions, parts list, and safety guidelines for the Nathan James Kensi End Table (SKU 33802). Learn how to assemble your furniture and understand its proper use and warranty.
	Beacon Storage Unit Assembly Instructions - Nathan James SKU 71402 Detailed assembly instructions, parts list, and safety information for the Nathan James Beacon Storage Unit (SKU 71402). Learn how to build your storage unit safely and efficiently with step-by-step guidance.
	Nathan James Jasper Storage Unit Assembly Instructions Step-by-step assembly guide for the Nathan James Jasper Storage Unit (SKU 71801), including parts list, hardware, tools needed, and safety instructions.
	Solace Dining Table Assembly Instructions \| Nathan James SKU 42301 Detailed assembly instructions for the Nathan James Solace Dining Table (SKU 42301). Includes a parts list, step-by-step visual guidance with text descriptions, safety information, and care instructions.

Nathan James Virgo Console Table (Model 37301)