1. Introduction
The BRITA Marella XL Water Filter Jug is designed to provide you with purer, great-tasting tap water. It effectively reduces limescale, chlorine, certain impurities, and metals, enhancing the flavor of your cold and hot beverages. This manual provides essential information on setting up, operating, maintaining, and troubleshooting your BRITA Marella XL jug.
Image: The BRITA Marella XL Water Filter Jug, shown with a MAXTRA PRO filter and its packaging, ready for use.
2. Setup
2.1 Initial Cleaning
Before first use, wash all components of the BRITA Marella XL jug (except the BRITA Memo lid) in warm soapy water or in a dishwasher. Rinse thoroughly.
2.2 Preparing the MAXTRA PRO Filter
- Unwrap the MAXTRA PRO filter cartridge.
- Submerge the filter in cold water and shake gently to remove any air bubbles. This primes the filter for optimal performance.
2.3 Inserting the Filter
- Place the funnel inside the jug.
- Insert the prepared MAXTRA PRO filter into the funnel, pressing it down firmly until it clicks into place. Ensure a snug fit to prevent unfiltered water from bypassing the filter.
2.4 First Use
Fill the jug with tap water. Discard the first two fillings of filtered water. These initial filtrations help to rinse the filter and prepare it for regular use. The third filling is ready for consumption.
Image: An exploded diagram illustrating the components of the BRITA Marella XL jug, including the lid with digital indicator, funnel, and MAXTRA PRO filter, highlighting its 3.5L total volume.
3. Operating
3.1 Filling the Carafe
To fill the jug, simply open the flip-top lid and place it under the tap. The water will flow through the MAXTRA PRO filter into the main reservoir. The Marella XL is designed to fit conveniently in most refrigerator doors.
Image: The BRITA Marella XL water filter jug positioned in a kitchen, demonstrating its practical design for everyday use.
3.2 BRITA Memo Digital Indicator
The BRITA Memo on the lid tracks the time since the last filter change. It will indicate when it's time to replace the MAXTRA PRO filter cartridge, typically every 4 weeks or after filtering 150 liters of water, whichever comes first. Press the START button on the Memo for a few seconds after each filter change to reset it.
3.3 Benefits of Filtered Water
Using the BRITA Marella XL provides water with a purer, cleaner taste by reducing substances like chlorine, limescale, certain pesticides, herbicides, pharmaceutical residues, and metals such as lead and copper. This improves the taste of drinking water and extends the life of your appliances by preventing limescale buildup.
Image: A person enjoying a glass of filtered water, illustrating the improved taste and quality provided by the BRITA system.
Image: A visual representation of the MAXTRA PRO filter actively purifying water, demonstrating its effectiveness in reducing various impurities.
4. Maintenance
4.1 Cleaning the Jug
The BRITA Marella XL jug (excluding the BRITA Memo lid) is dishwasher safe. For manual cleaning, use warm water and a mild detergent. Ensure all parts are thoroughly rinsed before reassembly.
4.2 Filter Replacement
Replace the MAXTRA PRO filter cartridge every 4 weeks or after filtering 150 liters of water to ensure optimal performance and water quality. Follow the steps in Section 2.2 and 2.3 for preparing and inserting the new filter.
Image: A detailed view of the MAXTRA PRO filter cartridge, emphasizing its design and branding.
4.3 Filter Recycling
BRITA MAXTRA PRO filter cartridges are recyclable. Please return used filters to a participating BRITA collection point. This contributes to reducing plastic waste and supports sustainable practices.
Image: A glass of clear, filtered water, with text indicating that one filter provides 150 liters of pure-tasting water and is made with 50% bio-based plastic.
5. Troubleshooting
- Slow Filtration: If water filters very slowly, the filter might be clogged. This can happen in areas with very hard water or high sediment. Try re-priming the filter (Section 2.2) or replace it if the issue persists.
- BRITA Memo Not Working: Ensure the Memo is dry and clean. If it doesn't reset or display correctly after pressing the START button, the battery might be depleted. The Memo unit is sealed and typically not user-replaceable; contact BRITA customer service if it fails within the warranty period.
- Unpleasant Water Taste: Ensure the filter is correctly installed and has been primed (first two fillings discarded). If the taste persists, the filter may be exhausted and needs replacement. Ensure you are using genuine BRITA MAXTRA PRO filters.
6. Specifications
| Product Dimensions (L x W x H) | 14.8 x 25.8 x 25.8 cm |
| Weight | 990 grams |
| Manufacturer | Brita |
| Item Model Number | 129064 |
| Country of Origin | Germany |
| Material | Plastic |
| Capacity | 3.5 Liters |
| Included Components | Marella Filter Jug + 1 Filter |
| Purification Method | Ion exchange pearls and activated carbon |
| Power Source | Non-electric |
7. Warranty and Support
The BRITA Marella XL Water Filter Jug comes with a 2-year availability for spare parts. For any questions, technical support, or warranty claims, please contact BRITA customer service. You can find contact information on the official BRITA website or through your local retailer.
Image: A comparison of the two MAXTRA PRO filter types: All-in-1 for general water improvement and Limescale Expert for areas with hard water, suitable for coffee and tea lovers.
