KiwiCo Robotics Bundle (3-Pack) Instruction Manual

Introduction

This manual provides detailed instructions for assembling, operating, and maintaining your KiwiCo Robotics Bundle. This bundle includes three distinct STEM kits: the Domino Machine, the Remote Controlled Snake, and the Jumping Robot. Each kit is designed to introduce fundamental engineering and science principles through hands-on construction and play. Please read all instructions carefully before beginning assembly or operation.

The KiwiCo Robotics Bundle includes a Domino Machine, Remote Controlled Snake, and Jumping Robot, offering engaging STEM activities.

General Safety Information

• Adult Supervision: Adult supervision is recommended for users under 12 years of age.
• Small Parts: This kit contains small parts which may pose a choking hazard for young children. Keep all components out of reach of children under 3 years old.
• Battery Safety: If any kit requires batteries, ensure they are inserted correctly according to polarity (+/-). Do not mix old and new batteries, or different types of batteries. Remove batteries if the product is not used for an extended period.
• Electrical Components: Handle all electrical components with care. Do not expose to water or extreme temperatures.
• Sharp Edges: Some components may have sharp edges. Handle with care during assembly.

What's in the Box

Your KiwiCo Robotics Bundle includes the following components for each of the three kits:

The KiwiCo Robotics Bundle packaging, showing the individual boxes for each kit.

• Domino Machine Kit: Wooden robot body set, electronics and hardware, dominoes, building and learning guides.
• Remote Controlled Snake Kit: Electronic components, wires, decorative skin, remote control unit, building and learning guides.
• Jumping Robot Kit: Wooden robot body set, spring-powered mechanism, cams, premade exterior, building and learning guides.

1. Domino Machine

Product Overview

The Domino Machine is a robot designed to automatically set up dominoes for intricate chain reactions. This kit allows users to engineer their own dazzling domino runs.

Assembly Instructions

Refer to the dedicated building guide included in your Domino Machine kit for step-by-step assembly. The process typically involves:

1. Assembling the wooden body components.
2. Integrating the electronic motor and wiring.
3. Attaching the domino placement mechanism.
4. Installing any required batteries (not included, typically 9V).

The assembled Domino Machine, ready to set up dominoes.

Operating Instructions

1. Ensure batteries are correctly installed.
2. Place dominoes into the machine's feeder tray.
3. Position the machine on a flat, smooth surface where you intend to create your domino run.
4. Activate the machine using its power switch. The robot will begin to move and place dominoes.
5. Guide the machine to create your desired domino pattern.

A child engaging with the Domino Machine, demonstrating its use.

2. Remote Controlled Snake

Product Overview

The Remote Controlled Snake is a robotic snake that can be assembled and customized. It teaches users about electronics and remote control mechanisms.

Assembly Instructions

Consult the detailed building guide provided with your Remote Controlled Snake kit. Key assembly steps include:

1. Connecting the various body segments.
2. Wiring the electronic components and motor.
3. Assembling the remote control unit.
4. Applying the decorative skin to the snake's body.
5. Installing any required batteries (not included).

Components of the Remote Controlled Snake kit before assembly.

Operating Instructions

1. Ensure batteries are installed in both the snake and the remote control.
2. Turn on the power switches for both the snake and the remote control.
3. Use the remote control's joysticks or buttons to maneuver the snake. Experiment with different movements and navigate through obstacles or mazes.

The assembled Remote Controlled Snake with its remote control.

3. Jumping Robot

Product Overview

The Jumping Robot is a spring-powered robot that can hop across surfaces. This kit provides insights into the mechanics of springs and cams.

Assembly Instructions

Follow the comprehensive building guide included with your Jumping Robot kit. Assembly typically involves:

1. Constructing the wooden body and leg components.
2. Assembling the cams and spring-powered mechanism.
3. Attaching the premade exterior or customizing body parts.
4. Installing any required batteries (not included).

Components of the Jumping Robot kit before assembly.

Operating Instructions

1. Ensure batteries are correctly installed.
2. Place the robot on a flat, smooth surface.
3. Flip the power switch to activate the robot. It will begin to hop.
4. Observe how the spring mechanism and cams work together to create the jumping motion.

Two assembled Jumping Robots demonstrating their functionality.

Maintenance

• Cleaning: Wipe down plastic and wooden parts with a dry or slightly damp cloth. Avoid using harsh chemicals.
• Storage: Store all kit components in their original packaging or a designated container to prevent loss or damage. Keep in a cool, dry place away from direct sunlight.
• Battery Replacement: Replace batteries as needed. Always use the recommended battery type and dispose of old batteries responsibly.
• Component Check: Periodically inspect all parts for wear and tear. Replace any damaged components to ensure safe and proper operation.

Troubleshooting

• Robot Not Moving:
  • Check battery installation and ensure batteries are fresh.
  • Verify all wires and connections are secure according to the assembly guide.
  • Ensure power switches are in the 'ON' position.
• Erratic Movement:
  • Inspect for any loose parts or obstructions.
  • Ensure the robot is operating on a flat, smooth surface.
• Remote Control Issues (RC Snake):
  • Check batteries in the remote control.
  • Ensure the remote control is within range and has a clear line of sight to the snake.

Specifications

• Brand: KiwiCo
• Model: Robotics Bundle (3-Pack)
• ASIN: B0BSVQBK26
• Recommended Age: 9+ years
• Focus: STEM (Science, Technology, Engineering, Mathematics)
• Included Kits: Domino Machine, Remote Controlled Snake, Jumping Robot
• Manufacturer: KiwiCo

Warranty and Support

For information regarding product warranty, returns, or technical support, please visit the official KiwiCo website or contact their customer service directly. Contact details can typically be found on the product packaging or their official website.

KiwiCo Website: www.kiwico.com