Yaheetech YT-001198212

Yaheetech Velvet Low Back Armless Ribbed Office Chair User Manual

Model: YT-001198212

Introduction

This manual provides essential information for the assembly, operation, and maintenance of your Yaheetech Velvet Low Back Armless Ribbed Office Chair. Please read these instructions carefully before assembly and use to ensure safe and correct operation.

Safety Instructions

Do not stand on the chair. This chair is designed for sitting only.
Ensure all screws and bolts are tightened securely before use.
Do not use the chair if any parts are missing, damaged, or worn.
Keep children away from moving parts during assembly.
Maximum weight recommendation: 265 pounds. Do not exceed this limit.

Package Contents

Verify that all components are present before beginning assembly:

Chair Seat and Backrest Assembly
Star Base
Gas Lift Cylinder
Casters (5 pieces)
Mechanism Plate
Screws and Allen Wrench (for assembly)

Figure 1: Exploded view of chair components, including seat, backrest, base, casters, and gas lift.

Assembly Instructions

Attach Casters to Star Base: Insert each of the five casters into the holes at the end of the star base arms. Push firmly until they click into place.
Install Gas Lift Cylinder: Place the gas lift cylinder into the center hole of the assembled star base.
Remove Protective Cap: IMPORTANT: Remove the black plastic cap from the top of the gas lift cylinder before proceeding. Failure to do so will prevent height adjustment.
Figure 2: Carefully remove the black plastic cap from the top of the gas lift cylinder before assembly to ensure proper function.
Attach Mechanism Plate to Seat: Align the mechanism plate with the pre-drilled holes on the underside of the chair seat. Secure it using the provided screws and Allen wrench. Ensure the adjustment lever faces the front of the seat.
Connect Seat to Gas Lift: Carefully place the assembled seat (with mechanism plate) onto the top of the gas lift cylinder. Press down firmly to secure.

For a visual guide, please refer to the assembly video below:

Video 1: This video demonstrates the step-by-step assembly process for the Yaheetech Velvet Low Back Armless Ribbed Office Chair, including attaching casters, installing the gas lift, and securing the seat.

Operating Instructions

Height Adjustment

To adjust the chair's height:

To raise the seat: While standing, pull the adjustment lever upwards. The seat will rise automatically. Release the lever at the desired height.
To lower the seat: While seated, pull the adjustment lever upwards. The seat will lower. Release the lever at the desired height.

Image demonstrating the 360-degree rotation and adjustable seat height features of the office chair. — Figure 3: The chair features 360-degree rotation and easy height adjustment using the lever located under the seat.

Swivel Function

The chair is designed with a 360-degree swivel function, allowing for easy rotation without moving the base. Simply rotate the seat to your desired position.

Movement

The five smooth-rolling casters allow for easy movement across various floor surfaces, including carpet and hard floors. To move the chair, simply push or pull it in the desired direction.

Maintenance

Cleaning: For the velvet fabric, gently wipe with a damp cloth and mild soap. Avoid harsh chemicals. For the chrome base, wipe with a soft, dry cloth.
Inspection: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
Caster Care: Keep casters free of debris (hair, lint) to ensure smooth rolling.

Close-up of velvet fabric texture — Figure 4: The soft velvet fabric is easy to clean with a damp cloth, maintaining its elegant appearance.

Troubleshooting

Problem	Possible Cause	Solution
Chair does not adjust height.	Protective cap still on gas lift cylinder.	Ensure the black plastic cap is removed from the gas lift cylinder.
Chair wobbles.	Loose screws or uneven assembly.	Check and tighten all screws and ensure the chair is assembled correctly on a flat surface.
Casters do not roll smoothly.	Debris caught in casters.	Clean any hair or debris from the caster wheels.

Specifications

Brand: Yaheetech
Model Number: YT-001198212
Material: Velvet, Metal (Frame)
Color: Dark Gray
Overall Dimensions: 20"D x 20.5"W x 37"H
Adjustable Height Range: 31.5" - 37" (from floor to top of backrest)
Seat Height Range: 18.3" - 24.2" (from floor to seat)
Seat Dimensions: 17"L x 15.2"D
Backrest Height: 15"
Backrest Width: 18"
Item Weight: 14.3 Pounds
Maximum Weight Recommendation: 265 Pounds
Features: Adjustable Height, Swivel, Armless, Ribbed Design, Ergonomic Backrest

Diagram illustrating the dimensions of the Yaheetech office chair, including height, width, depth, and maximum weight capacity. — Figure 5: Detailed dimensions of the chair, including height, width, depth, and maximum weight capacity.

Warranty and Support

For warranty information or customer support, please refer to the product packaging or contact Yaheetech customer service directly. Contact details are typically provided with your purchase documentation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.