1. Introduction
This manual provides essential information for the safe and effective use of your Bear Archery Royale Ready to Hunt Compound Bow Package. Please read all instructions carefully before assembly, adjustment, or use. Proper understanding and adherence to these guidelines will ensure optimal performance and user safety.
Image 1.1: Full view of the Bear Archery Royale Compound Bow, showcasing its design and components.
2. Safety Information
Archery can be dangerous if proper safety precautions are not followed. Always observe the following rules:
- Always inspect your bow and arrows before each use for any damage or wear. Do not use damaged equipment.
- Never dry fire a compound bow. Dry firing can cause severe damage to the bow and potential injury to the user.
- Always point the bow in a safe direction. Never point a loaded or unloaded bow at anything you do not intend to shoot.
- Ensure a clear shooting lane and safe backdrop. Be aware of your surroundings and what lies beyond your target.
- Wear appropriate safety gear, including armguards and finger tabs/releases.
- Keep fingers and clothing clear of the bowstring and cams during operation.
- Store the bow safely out of reach of children and unauthorized users.
3. Package Contents
The Bear Archery Royale Ready to Hunt (RTH) Compound Bow Package includes the following components, pre-installed for convenience:
- Bear Archery Royale Compound Bow
- Trophy Ridge Mist Sight
- Whisker Biscuit Arrow Rest
- 5-Spot Quiver
- Fletcher Archery No-Tie Peep Sight
- Nock Loop
Image 3.1: Illustration of the included Ready to Hunt accessories: Trophy Ridge Mist Sight, Whisker Biscuit, 5-Spot Quiver, Fletcher Archery No-Tie Peep Sight, and Nock Loop.
4. Setup and Adjustments
The Bear Archery Royale bow is designed for easy adjustment without the need for a bow press. This allows for quick modifications to draw length and draw weight using a standard Allen wrench.
4.1. Adjusting Draw Length
The draw length can be adjusted within a range of 12 to 27 inches. Consult the cam module for specific adjustment points. Use an Allen wrench to loosen the module screws, rotate the module to the desired draw length setting, and then securely tighten the screws.
4.2. Adjusting Draw Weight
The draw weight is adjustable from 5 to 50 pounds. To adjust, use an Allen wrench to turn the limb bolts. Turning the limb bolts clockwise increases the draw weight, while turning them counter-clockwise decreases it. Ensure both limb bolts are adjusted equally to maintain proper limb alignment.
Image 4.1: Close-up of the cam system, highlighting the easy adjustment points for draw length and draw weight using an Allen wrench.
5. Operating Instructions
This section outlines the basic steps for operating your compound bow. Always ensure you are in a safe shooting environment before proceeding.
5.1. Nocking an Arrow
Place the arrow on the Whisker Biscuit arrow rest. Align the nock of the arrow with the pre-installed nock loop on the bowstring. Ensure the arrow is securely seated.
5.2. Drawing the Bow
With a firm grip on the riser, use your release aid (if applicable) or fingers to draw the bowstring back smoothly until it reaches full draw, engaging the let-off. The Royale bow features a 75% let-off, reducing the holding weight at full draw.
5.3. Aiming and Shooting
Use the Trophy Ridge Mist Sight to align your shot with the target. Maintain a steady stance and consistent anchor point. When ready, activate your release aid or smoothly release the string with your fingers. Follow through with your shot.
Image 5.1: Detail of the Trophy Ridge Mist Sight and Whisker Biscuit arrow rest, essential components for aiming and arrow stability.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your bow.
- Inspect Strings and Cables: Regularly check the bowstring and cables for fraying, cuts, or wear. Replace them if any damage is observed.
- Waxing the String: Apply bowstring wax periodically to the main string and cables to protect them from wear and weather.
- Clean the Bow: Wipe down the riser and limbs with a soft, damp cloth after use to remove dirt and debris.
- Check Fasteners: Periodically inspect all screws and bolts (e.g., limb bolts, sight screws, rest screws) to ensure they are tight. Do not overtighten.
- Storage: Store your bow in a cool, dry place, preferably in a bow case, to protect it from environmental damage and accidental impact.
7. Troubleshooting
This section addresses common issues you might encounter.
7.1. Inconsistent Accuracy
- Check Nock Point: Ensure the arrow nock is consistently placed on the nock loop.
- Inspect Arrow Rest: Verify the Whisker Biscuit is properly aligned and not damaged.
- Review Form: Inconsistent shooting form is a common cause of accuracy issues. Practice consistent grip, anchor point, and release.
- Sight Adjustment: Ensure your sight pins are properly calibrated for your shooting distance.
7.2. Bow Noise
- Loose Accessories: Check if the sight, quiver, or other accessories are securely tightened.
- String/Cable Wear: Frayed strings or cables can cause noise. Inspect and replace if necessary.
- Limb Bolts: Ensure limb bolts are tightened to the correct specifications.
7.3. Difficulty Adjusting Draw Length/Weight
Ensure you are using the correct size Allen wrench and applying appropriate force. Refer to Section 4 for detailed adjustment instructions. If resistance is excessive, do not force it; consult a qualified archery technician.
8. Specifications
Key specifications for the Bear Archery Royale Compound Bow:
- Model Name: Royale
- Model Number: AV02A21015R
- Brand: Bear Archery
- Hand Orientation: Right Hand
- Material: Carbon Fibre
- Product Dimensions: 76.2 x 25.4 x 10.16 cm (30 x 10 x 4 inches)
- Item Weight: 1.23 kg (2.71 lbs)
- Archery Draw Weight: 5-50 lbs (adjustable)
- Archery Draw Length: 12-27 inches (adjustable)
- Brace Height: 6 inches
- Let-Off: 75%
- Axle-to-Axle: 27 inches
- Speed: Up to 290 FPS (Feet Per Second)
- UPC/GTIN: 754806357720
Image 8.1: Graphic displaying key specifications including speed, brace height, let-off, draw length range, draw weight, and axle-to-axle length.
9. Warranty and Support
For warranty information and customer support regarding your Bear Archery Royale Compound Bow Package, please refer to the official Bear Archery website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
Manufacturer: Bear Archery
Website: www.beararchery.com (Please verify the current official website for Bear Archery)