1. Introduction
Thank you for choosing the PULIVIA Sports Stopwatch PL-703L. This digital stopwatch is designed for precise timing in various sports and activities, offering multiple functions including a stopwatch, clock, alarm, and hourly chime. Its ergonomic design and large display ensure ease of use and readability.
Package Contents:
- 1 x PULIVIA Sports Stopwatch PL-703L
- 1 x Lanyard
- 1 x User Manual (this document)

Figure 1: PULIVIA Sports Stopwatch PL-703L with lanyard.
2. Setup
2.1 Initial Use
Upon first use, you may notice a protective film on the display. This is designed to prevent scratches during shipping. Gently peel off the screen protector for optimal display clarity.
2.2 Attaching the Lanyard
Thread the provided lanyard through the loop at the top of the stopwatch. This allows for convenient carrying around your neck, keeping your hands free during activities.
3. Operating Instructions
The PULIVIA Sports Stopwatch features three primary buttons: MODE (A), START-STOP (B), and SPLIT-RESET (C).

Figure 2: Button layout and alarm/hourly tone indicators. Button A is MODE, Button B is START-STOP, Button C is SPLIT-RESET.
3.1 Mode Selection
Press the MODE (A) button to cycle through the different functions: Time Display, Stopwatch, and Alarm.
3.2 Setting Time and Date
- In Time Display mode, press and hold the SPLIT-RESET (C) button until the seconds begin to flash.
- Press the START-STOP (B) button to adjust the flashing value (seconds, minutes, hours, month, date, day of week).
- Press the MODE (A) button to move to the next setting.
- Once all settings are complete, press SPLIT-RESET (C) again to exit setting mode.
- To switch between 12-hour and 24-hour format, press the START-STOP (B) button while in Time Display mode (not in setting mode).
3.3 Using the Stopwatch Function
- Press the MODE (A) button until "0:00:00" or a similar stopwatch display appears.
- Press START-STOP (B) to start the timer.
- Press START-STOP (B) again to pause the timer.
- To resume, press START-STOP (B).
- To record a split time (lap time), press SPLIT-RESET (C) while the stopwatch is running. The display will show the split time, while the internal timer continues. Press SPLIT-RESET (C) again to return to the running time.
- To stop the stopwatch completely, press START-STOP (B) to pause it, then press SPLIT-RESET (C) to reset it to zero.
3.4 Setting the Alarm
- Press the MODE (A) button until the alarm time display appears (e.g., "AL").
- Press and hold the SPLIT-RESET (C) button until the alarm hours begin to flash.
- Press the START-STOP (B) button to adjust the flashing hour.
- Press the MODE (A) button to move to the minutes setting.
- Press the START-STOP (B) button to adjust the flashing minutes.
- Press SPLIT-RESET (C) to exit alarm setting mode.
To turn the alarm ON or OFF: In alarm mode, press the START-STOP (B) and SPLIT-RESET (C) buttons simultaneously. An alarm icon will appear or disappear to indicate its status.
3.5 Hourly Chime
To turn the hourly chime ON or OFF: In Time Display mode, press the SPLIT-RESET (C) and MODE (A) buttons simultaneously. A chime icon will appear or disappear to indicate its status.
4. Maintenance
4.1 Cleaning
Wipe the stopwatch with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Avoid using harsh chemicals or abrasive cleaners.
4.2 Water Resistance
The stopwatch is designed to be splash-proof and resistant to light rain. Do not press buttons underwater. Do not submerge the stopwatch in water.
4.3 Storage
Store the stopwatch in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
5. Troubleshooting
- Display is blank or dim: The battery may be low or depleted. Replace the battery (CR2032, typically, though not specified in product data).
- Buttons are unresponsive: Ensure the stopwatch is not exposed to extreme temperatures or moisture. Try resetting the device by removing and reinserting the battery (if accessible).
- Incorrect time display: Refer to Section 3.2 "Setting Time and Date" to re-adjust the time.
- Alarm not sounding: Ensure the alarm function is turned ON (refer to Section 3.4). Check alarm volume settings if applicable (though this model likely has a fixed volume).
6. Specifications
| Feature | Detail |
|---|---|
| Model | PL-703L |
| Brand | PULIVIA |
| Material | Plastic |
| Dimensions (H x W x D) | 7 cm x 6.5 cm x 1.7 cm (approx.) |
| Weight | 40 g |
| Display Size | 2.76 inches (diagonal) |
| Time Precision | 1/100th of a second |
| Functions | Stopwatch, Clock (12/24h), Alarm, Hourly Chime, Split Memory |
| Water Resistance | Splash-proof (not for underwater use) |

Figure 3: Physical dimensions (6.5cm width, 7cm height) and weight (35g, though spec says 40g, I'll use the spec value) of the stopwatch.
7. Warranty and Support
For any questions, concerns, or technical assistance, please contact PULIVIA customer service via Amazon Email. We are committed to providing 7 days / 24 hours customer support to ensure your satisfaction.
Please note that specific warranty details may vary by region and retailer. Retain your proof of purchase for any warranty claims.