Introduction
Thank you for choosing the Yaheetech Faux Leather Armchair. This manual provides essential information for the safe and correct assembly, use, and maintenance of your new armchair. Please read these instructions carefully before assembly and retain them for future reference.
Image: Front and side view of the Yaheetech Faux Leather Armchair, showing overall dimensions and weight capacity of 136 kg.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the armchair on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly, as this may damage the material.
- Keep small parts and packaging materials away from children and pets to prevent choking hazards.
- Do not stand on the armchair or use it as a step stool.
- The maximum weight capacity for this armchair is 136 kg. Do not exceed this limit.
- Periodically check all fasteners to ensure they remain tight.
Package Contents
Please verify that all the following components are included in your package:
- 1 x Armchair Body (Seat, Backrest, Armrests combined)
- 4 x Tapered Legs
- 1 x Hardware Pack (Screws, Washers, Allen Key)
Setup and Assembly
Assembly of your Yaheetech armchair is straightforward and typically requires minimal time.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to avoid damage.
- Identify Leg Attachment Points: Turn the armchair body upside down. Locate the pre-drilled holes and mounting plates for the legs on the underside of the chair.
- Attach Legs: Align each tapered leg with its corresponding mounting plate. Insert the screws from the hardware pack through the holes in the plate and into the legs. Hand-tighten all screws initially.
- Secure Legs: Once all legs are in place, use the provided Allen key to fully tighten all screws. Ensure the legs are securely fastened but do not overtighten.
- Position Armchair: Carefully turn the armchair upright and place it in your desired location. Ensure it is stable and does not wobble.
Image: Detail of the armchair's leg structure, illustrating how the tapered legs attach to the main body.
Operating and Usage
Your Yaheetech Faux Leather Armchair is designed for comfortable seating in various indoor environments.
- Use the armchair for sitting purposes only.
- Place the armchair on a flat, stable surface to prevent tipping.
- Avoid placing the armchair in direct sunlight or near heat sources to prevent material degradation.
- The armchair is suitable for living rooms, bedrooms, offices, or reception areas.
Image: The armchair positioned in a modern living room with a bookshelf and window, demonstrating typical usage.
Maintenance
Proper care will extend the life and appearance of your armchair.
- Regular Cleaning: Dust the faux leather surface regularly with a soft, dry cloth.
- Spot Cleaning: For spills, immediately blot with a clean, dry cloth. For stubborn stains, use a mild soap solution and a damp cloth, then wipe dry. Avoid abrasive cleaners or harsh chemicals.
- Avoid Sharp Objects: Keep sharp objects away from the faux leather to prevent punctures or tears.
- Sunlight Exposure: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack. Position the armchair away from direct sun or use curtains/blinds.
- Structural Check: Periodically inspect the legs and frame for any looseness. Tighten screws as needed.
Image: A detailed view of the armchair's tufted backrest, highlighting the faux leather material and button detailing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Armchair wobbles | Loose leg screws or uneven floor. | Tighten all leg screws. Move the armchair to a flat surface or use furniture pads to level. |
| Squeaking noise | Loose connections in the frame or legs. | Check and tighten all assembly screws. |
| Faux leather appears dull or stained | Accumulated dust or spills. | Clean with a soft, damp cloth and mild soap solution, then wipe dry. Avoid harsh chemicals. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model | YA-00119773 |
| Color | Brown |
| Material | Faux Leather, Plywood (E1 class), Metal (legs), Sponge (filling), Pocket Springs |
| Overall Dimensions (L x W x H) | 73 x 72.5 x 93 cm (28.7 x 28.5 x 36.6 inches) |
| Seat Dimensions (W x D) | 48.5 x 52 cm (19.1 x 20.5 inches) |
| Seat Height | 45 cm (17.7 inches) |
| Armrest Height | 62 cm (24.4 inches) |
| Backrest Depth | 53.5 cm (21.1 inches) |
| Maximum Weight Capacity | 136 kg (300 lbs) |
| Item Weight | 15 kg (33 lbs) |
Image: A cutaway view of the armchair's seat cushion, revealing the internal pocket spring construction for enhanced comfort and durability.
Warranty and Support
Yaheetech products are manufactured with quality and customer satisfaction in mind. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Yaheetech website.
If you encounter any issues or have questions regarding your armchair, please contact Yaheetech customer support:
- Online Support: Visit the Yaheetech Store on Amazon for contact information and FAQs.
- Email/Phone: Refer to your product packaging or the Yaheetech website for the most current contact details.
