1. Introduction
Thank you for choosing the Mobili Fiver Clara Electric Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read these instructions carefully before use and retain them for future reference.
The Clara Electric Standing Desk is designed to offer a versatile and ergonomic workspace, allowing you to easily switch between sitting and standing positions to promote a healthier work routine.
2. Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Keep children and pets away from the desk during operation to prevent injury.
- Do not place hands or other objects near moving parts (legs, motors) during height adjustment.
- Ensure the power cord is properly connected and routed to avoid tripping hazards or damage.
- Do not overload the desk. Refer to the specifications for maximum weight capacity.
- Only use the provided power cords (UK, USA, EU) suitable for your region.
- In case of malfunction, disconnect the power supply immediately and contact customer support.
3. Assembly Instructions
Assembly is required for this product. All necessary tools are included. It is recommended to assemble the desk with two people for ease and safety.
- Unpack Components: Carefully remove all parts from the packaging. Keep the packaging materials until assembly is complete in case of return.
- Identify Parts: Refer to the included instruction manual for a detailed list and diagram of all components.
- Attach Legs to Desktop: Securely fasten the desk legs to the underside of the desktop using the provided screws and tools. Ensure proper alignment.
- Connect Motors and Control Panel: Connect the motor cables to the control box and the control panel cable to the control box as per the diagram in the separate instruction sheet.
- Install Power Cord: Connect the appropriate power cord (UK, USA, or EU) to the control box.
- Cable Management: Route all cables neatly to prevent tangling or damage.
- Final Check: Ensure all screws are tightened and the desk is stable before connecting to power.
4. Operating Instructions
The Clara Electric Standing Desk features an intuitive control panel for easy height adjustment and personalized settings.
4.1. Height Adjustment
- Raise Desk: Press and hold the Up (▲) button to raise the desk to your desired height.
- Lower Desk: Press and hold the Down (▼) button to lower the desk to your desired height.
- The desk's two motors ensure a smooth and stable movement during adjustment.
4.2. Memory Presets
The control panel allows you to store up to three preferred height levels for quick access.
- Adjust the desk to your desired height using the Up/Down buttons.
- Press the M button. The display will flash.
- Within 3 seconds, press one of the preset buttons (1, 2, or 3) to save the current height to that position.
- To recall a saved height, simply press the corresponding preset button (1, 2, or 3). The desk will automatically move to the saved position.
4.3. Anti-Collision Mechanism
The desk is equipped with an anti-collision system. If the desk encounters an obstacle during height adjustment, it will automatically stop its movement to prevent damage or injury.
4.4. Timer Function
Set a custom timer to remind you to change your working position, promoting a more dynamic and less sedentary workday.
- Consult the detailed control panel instructions provided separately for specific steps on setting and activating the timer.
5. Maintenance
- Cleaning: Wipe the desk surface and legs with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Cable Check: Periodically inspect all cables for signs of wear or damage. Ensure they are securely connected and not pinched.
- Tighten Fasteners: Occasionally check and tighten any loose screws or fasteners to maintain stability.
- Motor Care: The electric motors are designed for maintenance-free operation. Do not attempt to lubricate or disassemble them.
6. Troubleshooting
If you encounter issues with your Clara Electric Standing Desk, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | Power cord disconnected; Motor cables loose; Overload | Check power connection; Ensure all cables are secure; Reduce weight on desk. |
| Uneven height adjustment | Obstruction; Unbalanced load | Remove any obstructions; Distribute weight evenly on the desktop. |
| Anti-collision system frequently activates | Obstruction in path; Sensitivity setting (if adjustable) | Ensure clear path for desk movement; Consult full manual for sensitivity adjustment if applicable. |
| Memory presets not working | Incorrect saving procedure | Follow the memory preset saving steps precisely (Section 4.2). |
If the problem persists after attempting these solutions, please contact Mobili Fiver customer support.
7. Specifications
| Brand | Mobili Fiver |
| Model Name | Clara |
| Model Number | 21CRQ7310R |
| Product Dimensions (W x D) | 120 cm x 80 cm (47.2"W x 31.4"D) |
| Adjustable Height Range | Approx. 63.5 cm (25") to 129.5 cm (51") |
| Color | Cement Black With Black Legs |
| Style | Modern |
| Base Material | Alloy Steel |
| Furniture Finish | Melamine |
| Item Weight | 42.59 Kilograms |
| Special Feature | Electric Height Adjustment, Memory Presets, Anti-Collision System, Timer Function |
| Assembly Required | Yes (Tools Included) |
8. Warranty and Support
8.1. Warranty Information
Specific warranty details for the Mobili Fiver Clara Electric Standing Desk are typically provided with your purchase documentation or can be found on the official Mobili Fiver website. Please retain your proof of purchase for any warranty claims.
8.2. Customer Support
For further assistance, technical support, or inquiries regarding your Mobili Fiver Clara Electric Standing Desk, please contact Mobili Fiver customer service. You can typically find contact information on the seller's page or the official brand website.
Online Support: Visit the Mobili Fiver Store on Amazon