User Manual for Brady Industrial RFID and 2D Barcode Scanner

Introduction

This manual provides comprehensive instructions for the safe and efficient operation of the Brady B-HH83-UHF-US Industrial RFID and 2D Barcode Scanner. This device is designed for high-performance RFID reading, barcode scanning, and mobile computing in challenging industrial environments. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

Safety Information

Always observe the following safety precautions:

• Do not expose the device to extreme temperatures, direct sunlight, or excessive moisture.
• Avoid dropping the device from heights greater than 5 feet, as this may cause damage despite its rugged design.
• Use only Brady-approved accessories and power adapters.
• Do not attempt to disassemble or repair the device yourself. Refer all servicing to qualified personnel.
• Keep the device away from strong magnetic fields.

Package Contents

Verify that all items are present in the package:

• Brady B-HH83-UHF-US Industrial RFID and 2D Barcode Scanner
• USB Cable
• Power Adapter (if included)
• Quick Start Guide
• Lithium Ion Battery (pre-installed or separate)

Product Overview

Familiarize yourself with the components of your Brady B-HH83-UHF-US scanner.

Figure 1: Front angled view of the Brady B-HH83-UHF-US scanner, showing the display screen with the Brady logo and the ergonomic handle.

Figure 2: Top-down view of the scanner, highlighting the display, navigation buttons, and the USB-C port at the front base.

Figure 3: Side view of the scanner, showing the battery compartment cover and the integrated RFID antenna area.

Figure 4: Bottom view of the scanner, illustrating the charging contacts and the overall robust construction.

Key Components:

• Display Screen: Touch-sensitive interface for navigation and data display.
• Scan Trigger: Button located on the handle for initiating RFID reads or barcode scans.
• RFID Antenna: Integrated for high-performance UHF RFID reading.
• 2D Barcode Imager: For scanning various 1D and 2D barcode symbologies.
• USB-C Port: For charging and data transfer.
• Battery Compartment: Houses the removable Lithium Ion battery.

Setup

1. Charging the Battery

1. Connect the USB cable to the scanner's USB-C port.
2. Connect the other end of the USB cable to the power adapter, then plug the adapter into a wall outlet.
3. Allow approximately 3-4 hours for a full charge. The charging indicator light will change color or turn off when fully charged.

Note: A fully charged battery provides up to 12 hours of continuous use.

2. Powering On/Off

• To Power On: Press and hold the Power button (usually located on the side or top) until the screen illuminates.
• To Power Off: Press and hold the Power button until a power-off menu appears on the screen. Select "Power Off".

3. Initial Configuration

Upon first power-on, the device may guide you through an initial setup wizard for language, time zone, and Wi-Fi connection. Follow the on-screen prompts.

• Wi-Fi Connection: Navigate to Settings > Network & Internet > Wi-Fi to connect to your wireless network.
• Bluetooth Pairing: Navigate to Settings > Connected devices > Pair new device to connect to Bluetooth-compatible devices.

Operating Instructions

1. RFID Reading

1. Ensure the RFID application is open on the device.
2. Point the RFID antenna towards the RFID tags you wish to read.
3. Press and hold the scan trigger. The device will begin reading RFID tags within its range (up to 50 feet).
4. Release the trigger to stop reading. Read data will be displayed on the screen or sent to the connected system.

Tip: Software-controllable RFID antenna polarizations can be adjusted in the application settings for optimal read performance in different orientations.

2. Barcode Scanning

1. Open the barcode scanning application or position the cursor in a field where barcode input is expected.
2. Aim the barcode imager at the barcode, ensuring the red aiming beam covers the entire barcode.
3. Press the scan trigger. A successful scan will typically be indicated by a beep and/or a green light.
4. The barcode data will be entered into the active field.

3. Data Transfer

Data collected by the scanner can be transferred via Wi-Fi, Bluetooth, or USB cable, depending on your application and system configuration.

• Wi-Fi: Data can be synchronized with network servers or cloud services.
• Bluetooth: Connect to compatible devices like laptops or mobile printers for direct data transfer.
• USB Cable: Connect the scanner to a computer to access its internal storage for data files.

Maintenance

Cleaning the Device

• Wipe the exterior of the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• For the display screen, use a microfiber cloth specifically designed for electronics.
• Ensure all ports are free of dust and debris.

Battery Care

• To maximize battery life, avoid fully discharging the battery frequently.
• Store the device with a partial charge (around 50%) if it will not be used for an extended period.
• Replace the battery if its capacity significantly diminishes.

Storage

Store the scanner in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

Warranty Information

This Brady product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official Brady website for detailed warranty terms and conditions.

Customer Support

For technical assistance, troubleshooting, or service inquiries, please contact Brady Customer Support:

• Website: www.bradycorp.com
• Phone: Refer to the contact information provided on the Brady website for your region.

When contacting support, please have your product model number (B-HH83-UHF-US) and serial number ready.