Product Overview
The VIVO STAND-TV17 is an extra tall TV floor stand designed to support screens from 13 to 50 inches, weighing up to 44 lbs. It features VESA compatibility up to 200x200mm and offers height and tilt adjustments for various viewing requirements.
Figure 1: VIVO STAND-TV17 Extra Tall TV Floor Stand with a mounted television.
Setup and Assembly
Follow these steps to assemble your VIVO STAND-TV17 TV floor stand. Refer to the assembly video for visual guidance.
Video 1: VIVO STAND-TV17 Assembly Instructions. This video provides a step-by-step guide for setting up the TV floor stand.
- Step 1: Assemble the Base. Secure the foot pads to the underside of the feet, then attach the base to the feet using the provided hardware.
- Step 2: Prepare the Center Pole. Remove the screws and separate the center pole into two segments.
- Step 3: Assemble the Pole Segments. Slide the plastic cover over the lower pole. Assemble the upper pole using the previously removed hardware.
- Step 4: Connect Pole to Base. Lift the plastic cover and connect the assembled pole to the base. Secure it with the provided screws.
- Step 5: Attach VESA Bracket to TV. Attach the VESA bracket to the back of your TV. Use adapters if needed to match your TV's VESA pattern.
- Step 6: Mount TV to Stand. Carefully place the TV onto the top of the pole and secure it by tightening the nuts at the top and bottom of the VESA plate.
Figure 2: Base dimensions of the stand, measuring 19.8 inches by 25 inches.
Operating Instructions
Height Adjustment
The stand offers 9 set points for telescopic pin lock height adjustment, allowing the screen to be positioned from 54.5 inches to 70.5 inches above the floor. To adjust the height, loosen the locking pins, slide the pole to the desired height, and re-secure the pins.
Figure 3: Height adjustment range and locking positions.
Screen Tilt
The screen tilt can be adjusted from 0° to +30°. This feature allows for angling the TV to reduce glare or improve viewing from different positions.
Figure 4: Screen tilt adjustment feature.
Compatibility
- Screen Size: 13 to 50 inches
- Weight Capacity: Up to 44 lbs
- VESA Patterns: 75x75mm, 100x100mm, 200x100mm, 200x200mm
- Compatible Screen Types: LCD, LED, OLED, 4K, Smart, Outdoor, Flat, and Curved TVs
Figure 5: VESA compatibility and screen size range.
Maintenance
- Regularly inspect all screws and connections to ensure they remain tight and secure.
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ensure the stand is placed on a stable, level surface to prevent tipping.
Troubleshooting
- Stand feels unstable: Verify all screws are tightened. Ensure the stand is on a flat, level surface. Adjust the leveling feet if necessary.
- TV does not fit the VESA bracket: Check your TV's VESA pattern against the stand's compatibility (75x75mm, 100x100mm, 200x100mm, 200x200mm). Adapters may be required for non-standard patterns.
- Difficulty adjusting height: Ensure the locking pins are fully disengaged before attempting to slide the pole. Do not force the adjustment.
Specifications
- Brand: VIVO
- Model Number: STAND-TV17
- Item Weight: 18.1 pounds
- Package Dimensions: 31.02 x 8.98 x 2.76 inches
- Color: Black
- Mounting Type: Floor Mount
- Movement Type: Stationary
- Material: Alloy Steel
- Compatible Devices: Television
- Maximum Tilt Angle: 30 Degrees
- UPC: 810080414006
Warranty and Support
VIVO products typically come with a manufacturer's warranty. Please refer to the product packaging or the official VIVO website for specific warranty details and terms. For technical assistance, missing parts, or any product-related inquiries, please contact VIVO customer support directly.
VIVO offers U.S.-based sales and technical support. For more information, visit the VIVO Store on Amazon.
