1. Important Safety Instructions
Please read and understand all instructions before assembling and using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the lamp is unplugged from the power outlet before assembly, disassembly, or cleaning.
- Use only bulbs of the specified type and wattage (E26 base, maximum 40W). Do not exceed the recommended wattage.
- This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Keep the power cord away from heat sources, sharp edges, and moving parts.
- Ensure all connections are secure and tightened properly to prevent instability.
- Do not attempt to modify or repair the lamp yourself. Contact qualified service personnel for repairs.
2. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Lamp Base
- Lower Pole Section
- Upper Pole Section with Adjustable Arm
- Lamp Head/Shade
- Power Cord with Foot Switch
- Assembly Hardware (screws, washers, wrench if applicable)
Image: Overview of lamp components and dimensions.
3. Assembly Instructions
Follow these steps to assemble your HOMCOM Adjustable Floor Lamp:
- Attach the Lower Pole to the Base: Carefully screw the lower pole section into the lamp base until it is secure. Ensure the power cord passes through the designated opening in the base.
- Connect the Upper Pole: Screw the upper pole section (with the adjustable arm) onto the lower pole section. Tighten firmly.
- Install the Lamp Head: Attach the lamp head/shade to the adjustable arm. Ensure it is securely fastened.
- Insert the Bulb: Screw an E26 base bulb (max 40W, not included) into the lamp socket. Do not overtighten.
- Position the Lamp: Place the lamp on a flat, stable surface. Plug the power cord into a suitable electrical outlet.
Image: Securely attaching the lower pole to the base.
Image: Compatible bulb types for the E26 socket.
4. Operating Instructions
Your HOMCOM Adjustable Floor Lamp offers flexible lighting options:
- Power On/Off: Use the convenient foot switch located on the power cord to turn the lamp on or off.
- Adjusting Height and Angle: The lamp features a 45° rotatable pole and a 90° rotatable lampshade. Loosen the adjustment knobs on the arm and pole to reposition the lamp head and height as desired. Tighten the knobs firmly after adjustment to secure the position.
Image: Location of the foot switch for power control.
Image: Demonstrating the flexible design with rotatable pole and lampshade.
Image: Detail of the adjustable joint for precise positioning.
5. Maintenance
To ensure the longevity and optimal performance of your lamp:
- Cleaning: Unplug the lamp before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled completely before attempting to replace it. Follow the wattage and base type specifications (E26, max 40W).
- Regular Checks: Periodically check all screws and connections to ensure they remain tight and secure.
6. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | No power, loose bulb, faulty switch | Check power outlet, ensure plug is fully inserted. Tighten bulb. Check foot switch for damage. |
| Lamp is unstable or falls over easily | Loose connections, uneven surface | Ensure the base is on a flat, stable surface. Re-tighten all pole connections and the base screw. |
| Adjustable arm does not stay in place | Adjustment knob not tightened sufficiently, worn mechanism | Ensure the adjustment knobs on the pole and arm are tightened firmly after positioning. If the issue persists, the mechanism may be worn; contact customer support. |
If these solutions do not resolve the issue, please contact HOMCOM customer support.
7. Product Specifications
| Model Number | B31-318 |
| Overall Dimensions | 31.5" L x 11.75" W x 48.75" - 65" H |
| Base Diameter | 11.75 Inches |
| Shade Height | 5 Inches |
| Material | Metal (Powder Coated Finish) |
| Color | Black with Gold Accents |
| Bulb Base | E26 |
| Max Wattage | 40W (Bulb not included) |
| Voltage | 120 Volts |
| Switch Type | Foot Switch |
| Item Weight | 10 Pounds |
| Indoor/Outdoor Use | Indoor Use Only |
8. Warranty Information
This HOMCOM Adjustable Floor Lamp (Model B31-318) comes with a 1-year warranty against manufacturer defects. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
9. Customer Support
For any questions, concerns, or assistance with your HOMCOM Adjustable Floor Lamp, please contact HOMCOM customer support. Refer to your purchase documentation or the HOMCOM official website for contact details.
