Introduction
This manual provides detailed instructions for the safe and effective use of your Palio Ballista Jet-Flame Lighter. Please read thoroughly before operation to ensure proper function and longevity of your device.
The Palio Ballista features an oversized jet-flame designed for quickly lighting various cigar ring gauges. Its design incorporates oversized air vents to assist performance at higher altitudes. The fuel tank is capable of holding 10g of butane, reducing the frequency of refills.
The Palio Ballista Jet-Flame Lighter in its closed state, showcasing its sleek black finish and compact design.
Safety Information
- Keep out of reach of children.
- Ignite lighter away from face and clothing.
- Contains flammable gas under pressure. Do not puncture or incinerate.
- Do not expose to heat above 120°F (49°C) or prolonged sunlight.
- Ensure flame is extinguished after each use.
- Do not keep lit for more than 10 seconds.
- Use only in well-ventilated areas.
Setup: Fueling the Lighter
The Palio Ballista Lighter uses high-quality butane fuel. For optimal performance, use premium triple-refined or higher butane.
- Ensure the lighter is completely cool before refilling.
- Invert the lighter and locate the refill valve at the bottom.
- Press the nozzle of the butane fuel can firmly into the refill valve.
- Hold for approximately 5-10 seconds. Repeat 2-3 times to ensure a full refill.
- Wait a few minutes after refilling before attempting to ignite the lighter to allow the gas to stabilize.
An illustration of the Palio Ballista Lighter with its key dimensions: 3.5 inches in height, 2.12 inches in width, and 0.88 inches in depth. The refill valve is located at the bottom.
Operating Instructions
Igniting the Lighter
- Hold the lighter upright.
- Press the ignition button firmly and quickly. The jet flame will appear from the top aperture.
- Release the button to extinguish the flame.
Adjusting the Flame
The flame height can be adjusted using the flame adjustment screw located at the bottom of the lighter. Use a small screwdriver or similar tool.
- Turn towards the '+' symbol for a larger flame.
- Turn towards the '-' symbol for a smaller flame.
The Palio Ballista Lighter with its powerful jet flame activated, ready for use.
Maintenance
Cleaning
- Periodically clean the ignition nozzle and surrounding area with a soft, dry cloth to remove any debris or soot.
- Do not use abrasive cleaners or solvents.
Storage
- Store the lighter in a cool, dry place, away from direct sunlight and heat sources.
- Ensure the lighter is empty of fuel if storing for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lighter does not ignite or flame is weak/inconsistent. | Low fuel level, air in fuel tank, clogged nozzle, or incorrect flame adjustment. |
|
| Flame is too large or too small. | Incorrect flame adjustment. | Adjust flame height using the screw at the bottom (turn towards '+' for larger, '-' for smaller). |
| Lighter leaks fuel during refill. | Butane can nozzle not properly aligned or valve is full. |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Palio |
| Model | Ballista |
| Color | Black |
| Style | Modern |
| Fuel Type | Liquefied Petroleum Gas (Butane) |
| Product Dimensions | 3.5"L x 2.13"W x 0.88"Th |
| Item Weight | 8 ounces |
| Manufacturer | QUALITY IMPORTERS TRADING COMPANY |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.
Manufacturer Contact: QUALITY IMPORTERS TRADING COMPANY