SERWALL Oversized Rocking Chair Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and care of your SERWALL Oversized Rocking Chair. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.

2. Safety Information

For your safety and to prevent damage to the product, please observe the following guidelines:

• Ensure all components are securely fastened before use.
• Do not exceed the maximum weight capacity of 380 pounds.
• Avoid standing on the chair or using it for purposes other than its intended use as a rocking chair.
• Keep children and pets away from the assembly area.
• Periodically check all bolts and screws to ensure they remain tight.

3. Package Contents

Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Figure 1: Exploded view of rocking chair components and hardware. Includes chair parts and 304 stainless steel screws.

4. Setup and Assembly Instructions

Assembly typically takes approximately 30 minutes for one person. An online video guide is available for visual assistance.

1. Step 1: Unpack Components. Carefully remove all parts from the packaging and lay them out on a clean, flat, soft surface to prevent scratching.
2. Step 2: Attach Side Frames. Connect the side frame pieces to the seat base using the provided hardware.
3. Step 3: Secure Backrest. Attach the backrest to the assembled seat and side frames.
4. Step 4: Install Rockers. Secure the curved rocker runners to the bottom of the chair legs.
5. Step 5: Final Tightening. Once all parts are loosely assembled, gradually tighten all screws and bolts. Note: For best results, fully tighten screws only after complete assembly to allow for proper alignment.

Figure 2: Visual representation of the 7-step assembly process.

Assembly Video Guide

5. Operating Instructions

The SERWALL Oversized Rocking Chair is designed for comfortable and stable rocking motion. To operate:

• Sit centrally on the contoured seat.
• Place your feet on the ground or a footrest to initiate rocking.
• The precision-calculated rocking arc ensures a gentle and stable rhythm, minimizing the risk of tipping.
• The ergonomic curved backrest and wide armrests provide optimal support and comfort during use.

Figure 3: Ergonomic design ensures stable and comfortable rocking.

6. Maintenance

Maintaining your SERWALL rocking chair is simple due to its durable HDPE construction:

• Regular Cleaning: For general dirt and dust, wipe down the surface with a dry brush or cloth.
• Deep Cleaning: For stubborn stains, use soapy water and a soft brush or cloth. Rinse thoroughly with clean water.
• No Painting or Sealing: The HDPE material is designed to resist fading, cracking, and rot, eliminating the need for painting, staining, or sealing.
• Hardware Check: Periodically inspect all 304 stainless steel screws and bolts for tightness and re-tighten if necessary.

Figure 4: The HDPE material is waterproof and easy to clean.

7. Troubleshooting

If you encounter any issues with your rocking chair, please refer to the following common solutions:

• Wobbling: Ensure all screws and bolts are fully tightened. Loosen slightly, adjust the chair on a flat surface, and then re-tighten all fasteners.
• Difficulty Rocking: Verify the chair is on a flat, even surface. Uneven surfaces can impede smooth rocking motion.
• Fading/Discoloration: While designed to resist fading, prolonged exposure to extreme UV can affect any material. Regular cleaning can help maintain its appearance.

For issues not covered here, please contact SERWALL customer support.

8. Specifications

9. Warranty and Support

SERWALL offers a 1000 Days Trial for this product. If you experience any issues or have questions regarding your rocking chair, please contact SERWALL customer support via Amazon. Your satisfaction is our priority.