1. Introduction
The Delta Dore Tyxia 1701 is a wireless remote control designed to operate your roller shutter or a group of roller shutters. It is compatible with devices equipped with Delta Dore (X3D) connectivity or wired roller shutters that have been fitted with appropriate modules. The remote features a long battery life and allows for the configuration of two favorite positions for convenient shutter control.
An indicator light on the remote provides confirmation that your commands have been successfully received and executed by the controlled equipment.
2. What's in the Box
Carefully unpack the contents and ensure all items are present:
- 1 x Tyxia 1701 Wireless Remote Control
- 1 x Remote Control Base

Image: The Tyxia 1701 remote control, its accompanying base, and the cover of the instruction manual, illustrating the product and its initial documentation.
3. Setup
Follow these steps to set up your Tyxia 1701 remote control:
- Battery Installation: The remote control comes with a pre-installed alkaline battery. No user installation is typically required for initial use.
- Mounting the Base: The included base can be placed on any flat surface or fixed to a wall.
- Placement: Simply place the base on a table, shelf, or any convenient location.
- Fixation: For wall mounting, use double-sided adhesive tape (not included) on the back of the base, or secure it with screws (not included) if the base has pre-drilled holes (check the physical product for details).
- Pairing with Shutters: The remote control needs to be paired with your Delta Dore X3D compatible roller shutters or wired shutters equipped with appropriate modules. Refer to the specific pairing instructions provided with your roller shutter system or module for detailed steps. This process typically involves putting the shutter receiver into a pairing mode and then sending a signal from the remote.

Image: The Tyxia 1701 remote control securely placed in its white base, ready for use or mounting.
4. Operating Instructions
The Tyxia 1701 remote control features a simple interface for controlling your roller shutters.
4.1. Basic Shutter Control
- Up Button (⌃): Press to open the roller shutter.
- Stop Button (⏹): Press to stop the roller shutter at its current position.
- Down Button (⌄): Press to close the roller shutter.
After pressing a command button, the central indicator light on the remote will illuminate to confirm that the command has been sent and received by the shutter system.
4.2. Favorite Positions
The remote allows you to configure and recall up to two favorite shutter positions.
- Button 1 (①): Recalls Favorite Position 1.
- Button 2 (②): Recalls Favorite Position 2.
Configuring Favorite Positions:
To set a favorite position, first manually adjust your roller shutter to the desired height using the Up/Down buttons. Once the shutter is in the desired position, refer to your shutter system's specific instructions for saving this position to the remote's Favorite Position 1 or 2 button. This usually involves a long press or a specific sequence of presses on the remote and/or the shutter's control unit.
5. Maintenance
5.1. Cleaning
To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components.
5.2. Battery Replacement
The Tyxia 1701 remote control is designed for a long battery life, up to 10 years under normal use. When the battery needs replacement, the indicator light may behave differently (e.g., not illuminating or flashing). The remote uses an alkaline battery (type not explicitly specified in JSON, but typically CR2032 or similar for such devices). To replace the battery:
- Locate the battery compartment on the back of the remote control.
- Using a small screwdriver or coin, carefully open the battery compartment cover.
- Remove the old battery.
- Insert a new battery of the correct type, ensuring the correct polarity (+/-).
- Close the battery compartment cover securely.
Note: Dispose of old batteries responsibly according to local regulations.
6. Troubleshooting
If you encounter issues with your Tyxia 1701 remote control, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote does not respond. |
|
|
| Shutter responds intermittently. |
|
|
| Favorite positions do not work. |
|
|
If the problem persists, contact Delta Dore customer support or consult their official website for further assistance.
7. Specifications
| Brand | Delta Dore |
| Model Name | Tyxia 1701 |
| Model Number | 6351441 |
| Color | White |
| Connectivity Technology | Radio Frequency (X3D) |
| Compatible Devices | Roller Shutters / Shutters |
| Maximum Supported Devices | 16 |
| Number of Buttons | 5 (Up, Stop, Down, Favorite 1, Favorite 2) |
| Controller Type | Remote Control |
| Maximum Range | 10 Meters (approximate, depends on environment) |
| Battery Type | Alkaline |
| Battery Life | Up to 10 years (normal use) |
8. Warranty and Support
8.1. Manufacturer Warranty
The Delta Dore Tyxia 1701 remote control comes with a manufacturer's warranty of 5 years from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
8.2. Spare Parts Availability
Spare parts for this product are available for up to 10 years from the date of manufacture.
8.3. Customer Support
For technical assistance, warranty claims, or further information, please contact Delta Dore customer support or visit their official website:
Please have your product model name (Tyxia 1701) and model number (6351441) ready when contacting support.





