1. Introduction
Thank you for choosing the LAVAED RGB+W 16 Color Changing Puck Lights. These versatile, USB rechargeable lights are designed to enhance your home with customizable illumination. Featuring 16 color options, dimmable brightness, and four dynamic lighting modes, they are perfect for various indoor applications. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your lights.
Image: The LAVAED RGB+W puck lights offer a wide range of colors and are controlled by an included remote.
2. What's in the Box
- 4 x Cabinet Lights
- 4 x 30cm USB Cables
- 4 x 3M Adhesive Tapes
- 4 x Magnetic Tapes
- 1 x Instruction Manual
- 1 x Remote Control
3. Specifications
| Feature | Description |
|---|---|
| Brand | LAVAED |
| Model Name | RGB+W Rechargeable Puck Lights |
| Color | RGB+White (16 colors) |
| Material | Acrylic |
| Power Source | Battery Powered (600mAh Lithium Ion) |
| Control Method | Remote Control, Touch Switch |
| Light Source Type | LED (12 LEDs) |
| Brightness | Up to 200 Lumens |
| Voltage | 5 Volts |
| Installation Type | Adhesive / Magnetic |
| Product Dimensions | 4.02 x 4.06 x 3.82 inches |
| Item Weight | 12.3 ounces (for the set) |
| Water Resistance Level | Not Water Resistant |
Image: Key features and dimensions of the LAVAED puck light, highlighting its compact size and versatile charging/mounting options.
4. Setup
4.1. Charging the Lights
Before initial use, fully charge each puck light. The built-in 600mAh rechargeable battery can be charged via the provided USB cable.
- Connect the small end of the USB cable to the charging port on the puck light.
- Connect the larger end of the USB cable to a USB power source (e.g., USB charger, car charger, power bank, or computer USB port).
- The indicator light will show red during charging and turn green when fully charged.
- A full charge typically takes 2-3 hours.
Image: The puck lights can be conveniently charged using various USB power sources.
Image: The charging indicator light changes from red to green when the battery is full.
4.2. Installation
The puck lights offer easy installation without drilling, using either built-in magnets or adhesive metal plates.
- Prepare the Surface: Ensure the desired installation surface is clean and dry.
- Attach Metal Plate (if needed): If installing on a non-ironwork surface, peel off the protective film from one side of the 3M adhesive tape and stick it onto the magnetic metal plate. Then, peel off the other side of the adhesive tape and firmly press the metal plate onto your chosen surface.
- Mount the Light: The puck light has a built-in magnet. Simply attach the light onto the metal plate or directly onto any ironwork surface.
Image: Step-by-step guide for adhesive and magnetic installation.
Image: Exploded view of the puck light's magnetic and adhesive mounting system.
5. Operating Instructions
5.1. Manual Control
In case the remote control is unavailable, you can manually operate the light:
- Press the lamp shell to turn the light ON/OFF.
5.2. Remote Control Functions
The included remote control allows for comprehensive management of your puck lights. The sensing range is approximately 10 feet.
- ON/OFF: Press the ON or OFF buttons to power the lights.
- Brightness Adjustment: Use the ☀+ and ☀- buttons to adjust brightness through 6 levels. You can also select preset brightness levels: 10%, 40%, 80%, and 100%.
- Color Selection: Choose from 16 static colors, including white, by pressing the corresponding color buttons (R, G, B, W, and various color shades).
- Lighting Modes: Select from four dynamic lighting effects:
- FLASH Mode: 1-second loop jump changing (color changes every 1 second).
- STROBE Mode: 5-second loop jump changing (color changes every 5 seconds).
- FADE Mode: 1-second loop gradient changing (color changes every 1 second).
- SMOOTH Mode: 5-second loop gradient changing (color changes every 5 seconds).
Image: The remote control provides full functionality for color, brightness, and mode selection.
Image: Brightness levels can be adjusted from 10% to 100% using the remote control.
6. Battery Life (Lasting Time)
The battery life varies depending on the brightness level and lighting mode selected. Below is an approximate guide:
| Gear | Description | Light Color | Lasting Time |
|---|---|---|---|
| 6 | Maximum brightness | White (R+G+B) | 1 hr |
| Fade mode | Maximum brightness | Color rotating | 1 hr 30 mins |
| 6 | Secondary Max. brightness | Red | 3 hrs |
| 5 | High brightness | Red | 3 hrs 30 mins |
| 4 | High brightness | Red | 4 hrs 30 mins |
| 3 | Middle brightness | Red | 6 hrs 30 mins |
| 2 | Low brightness | Red | 12 hrs 30 mins |
| 1 | Lowest brightness | Red | 40 hrs |
Note: The infrared receiver consumes some power while in standby mode.
Lasting Time After Standby
| Standby Time | Gear | Description | Light Color | Lasting Time |
|---|---|---|---|---|
| 1 day | 4 | High brightness | Red | 4 hrs 20 mins |
| 3 days | 4 | High brightness | Red | 3 hrs 50 mins |
| 5 days | 4 | High brightness | Red | 3 hrs 30 mins |
| 7 days | 2 | Low brightness | Red | 6 hrs |
| 2 weeks | 2 | Low brightness | Red | 3 hrs |
| 3 weeks | 2 | Low brightness | Red | 1 hrs |
| 4 weeks | 2 | Low brightness | Red | 1 hrs |
Image: Detailed battery life chart for various settings and standby durations.
7. Maintenance
- Cleaning: Wipe the lights with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Battery Care: To prolong battery life, avoid fully discharging the lights frequently. Recharge them when the brightness noticeably diminishes. If storing for an extended period, charge them periodically.
- Storage: Store the lights in a cool, dry place away from direct sunlight and extreme temperatures.
8. Troubleshooting
- Light not turning ON:
- Ensure the light is charged.
- Check if the remote control battery is functional.
- Try manual control by pressing the lamp shell.
- Remote control not working:
- Ensure there are no obstructions between the remote and the light.
- Check the remote control battery and replace if necessary.
- Ensure you are within the 10-foot sensing range.
- Short battery life:
- Operating at maximum brightness or dynamic modes will consume battery faster. Reduce brightness or use static colors for longer duration.
- Ensure the light is fully charged before use.
- Light not adhering properly:
- Ensure the installation surface is clean, dry, and smooth.
- Apply firm pressure when attaching the adhesive metal plate.
9. Official Product Video
Watch this video for a demonstration of the LAVAED RGB+W Puck Lights in various settings and color modes.
Video: LAVAED RGBW Motion Sensor Lights - A demonstration of the lights' color-changing capabilities and versatile applications.
10. Warranty and Support
LAVAED products are backed by a manufacturer's 12-month warranty, offering a money-back or replacement guarantee. If you encounter any issues or are not completely satisfied with your product, please contact our customer service support team in a timely manner for assistance.
For customer service inquiries, please refer to the contact information provided on the product packaging or the official LAVAED website.
11. Safety Information
- This product is designed for indoor use only. It is not water resistant.
- Do not attempt to disassemble or modify the product. This may void the warranty and pose a safety risk.
- Keep out of reach of children.
- Use only the provided USB cable for charging.
- Avoid exposing the lights to extreme temperatures or high humidity.