1. Important Safety Information
Please read all safety instructions before using the projector. Failure to follow these instructions may result in electric shock, fire, or other injuries.
- Do not look directly into the projector lens when the lamp is on. The intense light can damage your eyes.
- Do not block ventilation openings. Ensure adequate airflow around the projector to prevent overheating.
- Use only the power adapter provided. Using an unauthorized adapter may damage the projector and void the warranty.
- Keep the projector away from water or moisture. Do not expose it to rain or immerse it in liquids.
- Avoid placing the projector on unstable surfaces. Ensure it is on a flat, stable surface to prevent falls.
- Do not attempt to repair the projector yourself. Refer all servicing to qualified service personnel.
2. Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your retailer or AAXA Technologies customer support.
- HP-P6X-01 DLP Projector
- Remote Control
- Composite AV Cable
- Wall Charger
- User Manual (this document)
3. Product Overview
The AAXA HP-P6X-01 is a portable DLP projector designed for various applications, featuring a built-in battery and multiple input options.
Figure 3.1: Front and top view of the AAXA HP-P6X-01 DLP Projector. This image shows the lens, ventilation grilles, and the control keypad on the top surface.
Figure 3.2: The AAXA HP-P6X-01 DLP Projector with its approximate dimensions: 6.25 inches (width), 6.2 inches (depth), and 1.85 inches (height), highlighting its compact size.
3.1. Projector Components
- Projection Lens: Emits the image.
- Control Keypad: Buttons on the top for navigation and settings.
- Ventilation Grilles: Located on the sides for heat dissipation.
- Focus Wheel: Manual adjustment for image clarity.
3.2. Input/Output Ports
Figure 3.3: Rear view of the AAXA HP-P6X-01 DLP Projector, illustrating its multiple input interfaces including Composite AV, USB Stick, Digital Input (HDMI), 3.5mm Headphone, and Micro SD TF Card slots.
- DC-IN 19V: Power input port for the wall charger.
- RESET: Small button to reset the device.
- AV: Composite AV input for older devices.
- USB: For connecting USB flash drives for media playback or charging devices.
- DIGITAL INPUT (HDMI): For connecting modern digital devices like laptops, gaming consoles, or streaming sticks.
- 3.5mm Audio Out: For connecting external speakers or headphones.
- TF Card Slot: For inserting a Micro SD card for media playback.
- CHARGE OFF/ON: Switch for the power bank function.
- FOCUS: Wheel for adjusting image focus.
4. Setup
4.1. Powering On/Off
- Connect the wall charger to the DC-IN 19V port on the projector and then to a power outlet. The projector can also operate on its internal battery.
- Press and hold the power button on the projector or remote control for a few seconds to turn it on.
- To turn off, press and hold the power button again until the projector shuts down.
4.2. Placement and Screen Size
Place the projector on a stable, flat surface. The distance from the projector to the screen or wall will determine the image size. The HP-P6X-01 can project an image from 10 inches up to 160 inches diagonally.
- Minimum Throw Distance: 0.53 feet (for a 10-inch image).
- Maximum Throw Distance: 12 feet (for a 160-inch image).
4.3. Focus Adjustment
After positioning the projector, rotate the focus wheel located near the lens until the projected image appears sharp and clear.
5. Operating Instructions
5.1. Navigating the Menu
Figure 5.1: Top view of the AAXA HP-P6X-01 DLP Projector showing the elegant keypad, alongside a representation of the onboard media player interface with options for Videos, Music, Photos, Brightness, Settings, and Inputs.
Use the control keypad on the projector or the remote control to navigate the on-screen menu. The directional buttons (up, down, left, right) are used to move between options, and the 'OK' or 'Enter' button is used to select.
5.2. Connecting External Devices
The projector supports various input sources:
- HDMI: Connect your laptop, streaming device, or gaming console using an HDMI cable to the 'DIGITAL INPUT' port. Select 'HDMI' as the input source from the projector's menu.
- USB: Insert a USB flash drive into the USB port. Navigate to the 'Media Player' section and select 'USB' to browse and play files.
- TF Card: Insert a Micro SD card into the TF Card slot. Navigate to the 'Media Player' section and select 'TF Card' to browse and play files.
- AV: Connect older devices like DVD players using the provided Composite AV cable to the 'AV' port. Select 'AV' as the input source.
5.3. Media Playback
The onboard media player supports direct playback of photos and videos from USB flash drives or TF cards. Supported video encoding includes AVC.
5.4. Brightness Modes
The projector offers different brightness modes to optimize power consumption and image output:
- ECO Mode: Reduces brightness for extended battery life.
- STANDARD Mode: Balanced brightness for general use.
- BOOST Mode: Maximum brightness (1,100 lumens) when plugged into AC power.
Figure 5.2: An example of an image projected onto a wall by the AAXA HP-P6X-01, demonstrating its display capability.
6. Maintenance
6.1. Cleaning the Lens
Gently wipe the projector lens with a soft, lint-free cloth specifically designed for optical lenses. Do not use abrasive cleaners or harsh chemicals.
6.2. Cleaning the Vents
Periodically use a soft brush or compressed air to clean dust from the ventilation grilles to ensure proper heat dissipation.
6.3. Battery Care
To prolong the life of the internal lithium-ion battery:
- Avoid fully discharging the battery frequently.
- Store the projector in a cool, dry place when not in use for extended periods.
- Charge the battery at least once every three months if stored.
7. Troubleshooting
If you encounter issues with your projector, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| No image projected | Ensure the projector is powered on. Check the input source selection. Verify the video cable connection (HDMI, AV). |
| Image is blurry | Adjust the focus wheel. Ensure the projection surface is flat. |
| No sound | Check the volume settings on the projector and the connected device. Ensure external speakers/headphones are properly connected to the 3.5mm Audio Out port. |
| Remote control not working | Replace the remote control batteries. Ensure there are no obstructions between the remote and the projector's IR receiver. |
| Projector overheats and shuts down | Ensure ventilation grilles are not blocked. Operate in a well-ventilated area. |
8. Specifications
Key technical specifications for the AAXA HP-P6X-01 DLP Projector:
| Feature | Specification |
|---|---|
| Brand | AAXA Technologies |
| Model Number | HP-P6X-01 |
| Display Technology | DLP |
| Native Resolution | 1280 x 800 (WXGA) |
| Brightness | 1000 LED Lumens (battery), 1100 LED Lumens (plugged in) |
| Contrast Ratio | 2000:1 |
| Light Source Life | 30,000 Hours (Osram LEDs) |
| Connectivity | HDMI, USB, TF Card, 3.5mm Audio Out, Composite AV |
| Battery | 15,000mAh Lithium-Ion (up to 4 hours) |
| Maximum Image Size | 160 inches |
| Minimum Image Size | 10 inches |
| Dimensions | Approx. 6.25" x 6.2" x 1.85" |
| Weight | Not specified (portable) |
9. Warranty and Support
For information regarding warranty coverage, technical support, or service, please refer to the official AAXA Technologies website or contact their customer service directly. Details are typically provided with your purchase documentation or on the manufacturer's website.
AAXA Technologies Contact Information: Please visit www.aaxatech.com for the most current support and contact details.
