Aivituvin Dog Crate Furniture Instruction Manual

1. Introduction

Thank you for choosing the Aivituvin Dog Crate Furniture. This product is designed to serve as both a comfortable and secure enclosure for your dog and a functional piece of furniture, such as a side table or nightstand. Its robust construction and thoughtful design aim to integrate seamlessly into your home environment while providing a safe space for your pet.

This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use and longevity of your dog crate furniture. Please read all instructions carefully before assembly and use.

Image 1.1: The Aivituvin Dog Crate Furniture, showcasing its dual functionality as a pet enclosure and a stylish end table.

2. Safety Information

To ensure the safety of your pet and household, please adhere to the following guidelines:

• Proper Sizing: Ensure the crate size is appropriate for your dog. This 27.2" model is ideal for small dogs up to 30 lbs, with a body length under 20" and body height under 15". Your dog should be able to stand up, turn around, and lie down comfortably.
• Supervision: Always supervise your pet, especially during initial use, to ensure they adapt well to the crate.
• Secure Latches: Always ensure both door latches are securely fastened when your pet is inside.
• Stable Placement: Place the crate on a flat, stable surface. Engage the wheel locks to prevent unintended movement.
• No Overloading: Do not place excessive weight on the top surface of the crate. Refer to product specifications for weight limits.
• Chew Resistance: While designed with chew-resistant metal, persistent chewers may still attempt to damage the crate. Monitor your pet's behavior.

Image 2.1: Guide for selecting the correct crate size based on your dog's body length and height, suitable for dogs up to 30 lbs.

Image 2.2: Illustration of the crate's chew-resistant metal wire construction, highlighting its durability compared to less robust materials.

3. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Top Panel (Particleboard)
• Side Panels (Metal Wire) - 2 pieces
• Front Door Panels (Metal Wire) - 2 pieces
• Back Panel (Metal Wire)
• Bottom Frame (Metal)
• Removable Wire Floor
• Removable Plastic Tray
• Comfort Cushion
• Casters (Wheels) - 4 pieces (2 with locks)
• Assembly Hardware (Screws, bolts, Allen wrench)

4. Setup and Assembly Instructions

Assembly typically takes approximately 25 minutes. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Identify each component using the package contents list.
2. Assemble Bottom Frame: Attach the side panels and back panel to the bottom metal frame using the provided hardware. Ensure all connections are snug but do not overtighten initially.
3. Install Front Doors: Attach the two front door panels to the assembled frame. The side door can be installed to open from the left or right, depending on your preference and space requirements. Secure the hinges with the appropriate hardware.
4. Insert Wire Floor and Tray: Slide the removable wire floor into the designated slots above the bottom frame. Then, slide the removable plastic tray underneath the wire floor.
5. Place Cushion: Position the comfort cushion on top of the wire floor inside the crate.
6. Attach Top Panel: Carefully place the particleboard top panel onto the assembled metal frame. Secure it using the remaining hardware. Ensure it is aligned properly.
7. Install Casters (Wheels): Screw the four casters into the pre-drilled holes on the bottom of the crate frame. Ensure the two lockable casters are installed on the same side for easier access. Tighten all screws securely.
8. Final Tightening: Once all components are assembled, go back and gently tighten all screws and bolts to ensure the crate is stable and secure.

Image 4.1: Demonstrates the customizable side door installation (left or right opening) and the functionality of the 360-degree rotating casters with locking brakes.

5. Operating Instructions

Using your Aivituvin Dog Crate Furniture is straightforward:

• Opening/Closing Doors: The crate features two doors for easy access. To open, slide the latch mechanism and pull the door outwards. To close, push the door shut and slide the latch into place until it clicks securely. Always ensure both latches are engaged.
• Using the Removable Tray: The plastic tray slides out from underneath the wire floor for easy cleaning. This helps contain any messes and keeps your pet elevated from dirt.
• Moving the Crate: The 360-degree rotating casters allow for easy movement of the crate. To move, unlock the two lockable wheels. To secure the crate in place, press down on the locking mechanism on the two lockable wheels.
• Cushion Placement: The included cushion provides a comfortable resting surface for your pet. Place it directly on the wire floor inside the crate.

Image 5.1: Details of the removable tray system for easy cleaning, along with the comfortable cushion and wire floor.

6. Maintenance

Regular cleaning and maintenance will extend the life of your Aivituvin Dog Crate Furniture:

• Removable Tray: The plastic tray should be removed and cleaned regularly. Wash with mild soap and water, then rinse thoroughly and dry before returning it to the crate.
• Comfort Cushion: The cushion can be spot cleaned or machine washed according to its care label (if applicable). Ensure it is completely dry before placing it back in the crate.
• Crate Frame and Top: Wipe down the metal frame and particleboard top with a damp cloth and mild detergent as needed. Avoid harsh chemicals that could damage the finish or harm your pet. Dry immediately to prevent water damage to the particleboard.
• Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary to maintain stability.

Image 6.1: The wooden top surface is designed for easy cleaning with a damp cloth.

7. Troubleshooting

If you encounter any issues, refer to the following common problems and solutions:

• Crate is Unstable/Wobbly:
  Solution: Ensure all assembly screws and bolts are fully tightened. Check that the crate is placed on a level surface.
• Doors Do Not Latch Securely:
  Solution: Verify that the door panels are correctly aligned during assembly. Check for any obstructions preventing the latch from engaging fully. If the latch mechanism appears damaged, contact customer support.
• Casters (Wheels) Do Not Lock:
  Solution: Ensure the locking lever on the casters is fully engaged. Check for any debris obstructing the locking mechanism.
• Crate Makes Rattling Noises:
  Solution: This can sometimes occur if connections are not fully tightened. Re-check all assembly points. Ensure the removable tray and wire floor are seated correctly.
• Pet is Resistant to Using the Crate:
  Solution: Crate training requires patience. Introduce the crate gradually with positive reinforcement (treats, toys). Never use the crate as punishment. Ensure the crate is a comfortable and positive space for your pet.

8. Specifications

9. Warranty and Support

For warranty information or product support, please contact Aivituvin customer service directly. Details regarding specific warranty periods and terms are typically provided with your purchase documentation or can be found on the official Aivituvin website.

You can visit the official Aivituvin store for more information and support: Aivituvin Store