Introduction
The GE Profile Opal 2.0 XL with 1 Gallon Tank is a countertop nugget ice maker designed to produce chewable, crunchable ice quickly and efficiently. This manual provides essential information for the setup, operation, and maintenance of your ice maker to ensure optimal performance and longevity.
Figure 1: GE Profile Opal 2.0 XL Nugget Ice Maker with side tank.
Key features include rapid ice production (first batch in 10 minutes or less), a large-capacity bin holding up to 48 ounces of ice, and an attached 1-gallon water tank for extended operation. The unit also features built-in WiFi for smart connectivity via the SmartHQ app, allowing for device status monitoring and ice scheduling.
Setup Guide
1. Unpacking and Placement
Carefully remove all packaging materials. Place the ice maker on a stable, level surface. Ensure there is at least a 4-inch clearance on all sides of the unit for proper ventilation.
Figure 2: Product dimensions for proper placement (17.5"D x 13.43"W x 16.5"H).
2. Water Tank Setup
The Opal 2.0 XL includes a 1-gallon side tank to minimize refills. Attach the side tank securely to the main unit. Ensure the connecting tubes lie flat and are not kinked. Fill the tank with water. Distilled water is recommended to minimize mineral buildup and maintain ice quality.
Figure 3: Filling the included side tank with water.
3. Initial Cleaning
Before first use, perform a cleaning cycle. Refer to the "Care and Maintenance" section for detailed cleaning instructions. This ensures your first batch of ice is fresh and free from manufacturing residues.
Operating Instructions
1. Powering On and Ice Production
Plug the ice maker into a grounded electrical outlet. Press the "Power" button to turn on the unit. The ice maker will begin producing ice within 10 minutes. The "Making Ice" indicator will illuminate.
Figure 4: Fresh ice production in 10 minutes.
2. SmartHQ App Connectivity
For enhanced control, download the SmartHQ app and pair it with your ice maker via built-in WiFi. The app allows you to monitor device status, schedule ice production, and receive automatic software updates. Voice control capabilities are also available through Alexa and Google.
Figure 5: Scheduling ice production using the SmartHQ App.
3. Collecting Ice
The ice maker features a removable drawer that holds up to 3 pounds of ice. Use the included ice scoop to retrieve ice. When the ice bin is full, the unit will automatically stop making ice and resume when ice levels drop.
Figure 6: The side tank provides extra water, reducing the need for frequent refills.
The unit may produce normal operating sounds similar to a refrigerator ice maker. These sounds are part of its normal function.
Figure 7: The ice maker produces sounds similar to a refrigerator ice maker during operation.
Care and Maintenance
Regular cleaning and descaling are crucial for maintaining the performance and ice quality of your GE Profile Opal ice maker.
1. Cleaning Frequency
For optimal use, clean your Opal ice maker once per week. This helps to sanitize the unit and prevent the buildup of impurities that can affect ice taste.
Figure 8: Wipe down the exterior and interior regularly.
2. Descaling
Descale your Opal ice maker every 2-3 weeks, or more frequently if you live in an area with hard water. Hard water can significantly impact the ice maker's performance and lead to mineral deposits. Use a descaling solution specifically designed for ice makers (e.g., Opal Cleaning Solution, P4INKCLEAN).
Figure 9: Descale regularly, especially in hard water areas, to prevent mineral buildup.
3. Water Filter
Consider using an Opal Water Filter (P4INKFILTR) for improved ice quality and reduced mineral buildup. Replace the filter as recommended by the manufacturer.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| "Add Water" indicator flashes, even when tank is full. | Air bubbles in the water line. | Lift the side tank, open the ice drawer, then close it. Hold the tank for 30 seconds to allow air to escape and water to flow. |
| Ice maker is noisy. | Normal operation sounds; low water level; obstructed air vents. | Occasional noise is normal. Verify water in reservoir. Ensure 4-inch clearance around unit and air vents are unobstructed. If noise persists, contact customer support. |
| Ice production is slow or stopped. | Low water level; unit needs cleaning/descaling; high ambient temperature. | Ensure water tank is full. Perform a cleaning and descaling cycle. Operate in a cool, well-ventilated area. |
Product Specifications
- Brand: Profile
- Model Name: XPIOX3SCSS
- Product Dimensions: 17.5"D x 13.43"W x 16.5"H
- Capacity: 3 Pounds (ice bin), 1 Gallon (water tank)
- Ice Production: 38 lbs per day (1.6 lbs per hour)
- Wattage: 300 watts
- Voltage: 120 Volts
- Material: Stainless Steel
- Item Weight: 38 pounds
- Installation Type: Countertop
- Special Features: Rapid Production, Fresh and Filtered Ice, Built-in WiFi and Voice Control, LED Display Screen
- Included Components: Ice Maker, Drip Tray, Ice Scoop
Warranty and Support
For detailed warranty information, please refer to the official user manual provided with your product. Additional protection plans are available for purchase to extend coverage beyond the standard manufacturer's warranty.
Official User Manual (PDF)
A comprehensive PDF version of the user manual is available for download:
Protection Plans
- 2-Year Protection Plan: Available for purchase.
- 3-Year Protection Plan: Available for purchase.
- Complete Protect: Monthly plan covering eligible past and future purchases.
For further assistance or to purchase protection plans, please visit the Profile Store on Amazon or contact GE Appliances customer support.
