Paladone Minecraft Hexagon Block Lights User Manual

Introduction

This manual provides instructions for the setup, operation, and maintenance of your Paladone Minecraft Hexagon Block Lights. Please read this manual thoroughly before use and retain it for future reference.

Package Contents

Verify that all items listed below are included in your package:

• 6 x Minecraft Hexagon Light Blocks
• 1 x Remote Control
• 6 x Connectors (for linking blocks)
• Adhesive pads (for wall mounting)

Image: Contents of the Paladone Minecraft Hexagon Light package.

Setup

Battery Installation

Each hexagon light block requires 3 AAA batteries, and the remote control requires 2 AAA batteries. Batteries are not included.

1. Locate the battery compartment on the back of each hexagon light block and the remote control.
2. Open the battery compartment cover.
3. Insert the batteries, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

Image: Battery installation in a Minecraft Hexagon Light block.

Connecting the Blocks

The hexagon blocks can be connected in various configurations using the provided connectors.

1. Align the connection points on the sides of two blocks.
2. Insert a connector piece firmly into the slots to join the blocks.
3. Repeat for additional blocks to create your desired pattern.

Image: Connecting two hexagon light blocks.

Wall Mounting (Optional)

The blocks can be mounted to a wall using the included adhesive pads.

1. Ensure the wall surface is clean and dry.
2. Peel the backing from an adhesive pad.
3. Apply the adhesive pad to the back of a connected light block.
4. Press the block firmly against the desired wall location for several seconds.
5. Ensure the blocks are securely attached before releasing.

Video: Demonstration of connecting and wall-mounting the Minecraft Hexagon Lights.

Operating Instructions

Power On/Off

The lights can be turned on or off using two methods:

• Touch Control: Tap any individual light block to toggle it on or off.
• Remote Control: Use the power button on the remote control to turn all connected lights on or off simultaneously.

Brightness Levels

The remote control allows you to adjust the brightness of the lights. There are three distinct brightness settings.

Press the brightness buttons on the remote to cycle through the available levels.

Light Modes

The Minecraft Hexagon Lights feature various lighting modes:

• Standard On/Off: Each block can be individually turned on or off via touch or remote.
• Phasing Mode: The lights will cycle through different patterns and colors. Activate this mode using the remote control.
• Music Reactive Mode: The lights will respond to sound and music, creating a dynamic display. Activate this mode using the remote control.

Image: Minecraft Hexagon Lights displaying various patterns and colors.

Maintenance

Cleaning

To clean the light blocks, gently wipe them with a soft, dry cloth. Do not use abrasive cleaners or immerse the blocks in water.

Battery Replacement

When the lights dim or the remote control becomes unresponsive, it is time to replace the batteries. Follow the battery installation steps in the Setup section.

Troubleshooting

Lights Not Turning On

• Ensure all batteries are correctly installed and are not depleted.
• Check that the battery compartment covers are securely closed.
• If using the remote, ensure it has working batteries and is pointed towards the lights.

Remote Control Not Working

• Replace the batteries in the remote control.
• Ensure there are no obstructions between the remote and the light blocks.

Lights Not Syncing or Responding Consistently

• Ensure all blocks are properly connected with the provided connectors.
• Try resetting the lights by removing and reinserting the batteries in all blocks.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt as proof of purchase.