Introduction
Thank you for purchasing the Polibi 3-Piece Farmhouse Counter Height Dining Set. This manual provides essential information for the safe assembly, proper use, and maintenance of your new dining set. Please read these instructions carefully before assembly and retain this manual for future reference.
Safety Information
WARNING: Follow all assembly instructions carefully to ensure stability and structural integrity. Do not exceed the recommended load limit for the table or stools. Failure to do so may result in injury or damage to the product.
- Ensure all parts are present and undamaged before beginning assembly.
- Assemble the product on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly, as this may damage the wood.
- Regularly check and tighten all fasteners to maintain stability.
- Keep small parts away from children during assembly.
- Do not stand on the table or stools.
- Use caution when plugging devices into the USB port. Ensure cables are not pinched or damaged.
Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- 1 x Counter Height Dining Table
- 2 x Upholstered Stools
- Assembly Hardware Kit (screws, bolts, Allen wrench)
- Instruction Manual
Image: Diagram illustrating the dimensions of the dining table and two stools. The table measures 47.2 inches long, 18 inches wide, and 36 inches high. Each stool measures 17.3 inches long, 13.2 inches wide, and 24 inches high, with a 2-inch thick seat.
Setup and Assembly
Assembly is required for this dining set. Please follow the steps below carefully. It is recommended to have two people for assembly.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent damage. Identify all parts against the package contents list.
- Assemble the Table Frame: Attach the table legs and support beams according to the provided diagram in the hardware kit. Ensure all connections are secure but do not fully tighten screws until the entire frame is assembled.
- Attach Tabletop: Carefully place the tabletop onto the assembled frame. Align the pre-drilled holes and secure the tabletop using the provided screws. Once the tabletop is attached, fully tighten all screws on the table frame.
- Install USB Port: Locate the pre-cut opening for the USB port on the side of the table. Insert the USB port unit and secure it with the provided fasteners. Route the power cable neatly.
- Assemble Stools: For each stool, attach the legs to the seat frame. Then, attach the footrests between the legs. Finally, secure the upholstered seat cushion to the stool frame. Fully tighten all screws.
- Final Check: Ensure all screws and bolts are securely tightened on both the table and stools. Place the dining set in its desired location.
Image: Detailed view highlighting the smooth tabletop, triangular support structure for stability, the integrated USB port, and the durable rubber wood table legs.
Operating Instructions
This dining set features a built-in USB port for convenient device charging.
- Using the USB Port: Plug the power cable from the USB port into a standard wall outlet. You can then connect your USB-compatible devices (e.g., smartphones, tablets) to the USB ports for charging.
- Space-Saving Design: The stools are designed to tuck neatly under the table when not in use, optimizing space in smaller areas.
Image: A close-up view of the built-in USB port located on the side of the table, showing two USB-A ports and the power cable connection.
Maintenance
Proper care will extend the life and appearance of your dining set.
- Cleaning the Table: Wipe the table surface with a dry cloth. For spills, use a slightly damp cloth and dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Cleaning Stool Upholstery: The upholstered cushions are covered with linen fabric. Clean spills immediately with a damp cloth. For tougher stains, a mild fabric cleaner can be used, following the product instructions. Test on an inconspicuous area first.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain structural integrity.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the wood finish and upholstery.
- Protect Surfaces: Use coasters and placemats to protect the tabletop from heat, moisture, and scratches.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table/Stools are wobbly | Loose fasteners; uneven floor. | Check and tighten all screws and bolts. Ensure the product is on a level surface. Use furniture glides if necessary. |
| USB port not charging devices | Power cable not plugged in; faulty outlet; damaged cable/port. | Ensure the USB power cable is securely plugged into a working wall outlet. Test the outlet with another device. Check the USB cable for damage. If the issue persists, contact customer support. |
| Scratches or minor damage to wood | Impact during use or assembly. | For minor scratches, use a wood repair marker or furniture polish matching the finish. |
Specifications
- Brand: Polibi
- Model: B0BRXQCW4L
- Type: 3-Piece Counter Height Dining Set
- Color: Milky White
- Material: Rubber Wood, MDF, Linen Fabric (stools)
- Table Dimensions (L x W x H): 47.2 x 18 x 36 inches
- Tabletop Thickness: 0.7 inches
- Stool Dimensions (L x W x H): 17.3 x 13.2 x 24 inches
- Stool Seat Thickness: 2 inches
- Special Feature: Built-in USB Port
- Assembly Required: Yes
- Product Care: Wipe with Dry Cloth
Image: The Polibi 3-Piece Farmhouse Counter Height Dining Set in Milky White, showcasing the table and two upholstered stools.
Warranty and Support
This Polibi dining set comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear.
For warranty claims, missing parts, or any other inquiries, please contact Polibi customer support. Please have your model number (B0BRXQCW4L) and proof of purchase ready when contacting support.
Polibi Customer Support: Refer to your purchase documentation or the Polibi brand store on Amazon for contact information. Visit the Polibi Store
