1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the RHOX Red Hawk LGT-143A Turn Signal Switch with Flasher Relay. This product is designed to provide turn signal functionality for compatible golf carts. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Product Overview
The Red Hawk LGT-143A is a turn signal switch assembly that includes an integrated flasher relay. It is designed as a replacement or upgrade component for golf carts, providing essential signaling capabilities for safe operation. The unit is engineered for reliable performance and ease of integration.
Image showing the Red Hawk LGT-143A turn signal switch and its integrated flasher relay.
3. Safety Information
- Always disconnect the golf cart's battery before performing any electrical work to prevent electrical shock or damage.
- Ensure all connections are secure and properly insulated to avoid short circuits.
- If you are unsure about any installation step, consult a qualified technician.
- Wear appropriate personal protective equipment (PPE) during installation.
4. Package Contents
Verify that all items are present before beginning installation:
- 1 x Red Hawk LGT-143A Turn Signal Switch with Flasher Relay
- Mounting hardware (clamps, screws, washers) - Based on typical inclusions for similar products.
Image displaying the mounting clamps and screws typically included for securing the turn signal switch to a golf cart steering column.
5. Installation
The Red Hawk LGT-143A is often described as a 'plug and play' component for compatible golf cart models. However, specific wiring may vary depending on your golf cart's make and model. Always refer to your golf cart's service manual for detailed wiring diagrams.
General Installation Steps:
- Disconnect Battery: Turn off the golf cart and disconnect the negative terminal of the battery to prevent electrical hazards.
- Locate Mounting Position: Identify a suitable location on the steering column or dashboard for the turn signal switch.
- Mount the Switch: Use the provided mounting hardware (clamps and screws) to securely attach the turn signal switch to the chosen location. Ensure it does not interfere with steering or other controls.
- Connect Wiring: Connect the wiring harness from the LGT-143A switch to the golf cart's existing wiring. This typically involves connecting to the main power, ground, and individual turn signal wires (front left, front right, rear left, rear right). If your golf cart has a dedicated harness for turn signals, this may be a direct plug-in connection.
- Secure Connections: Ensure all electrical connections are tight and properly insulated.
- Reconnect Battery: Reconnect the negative terminal of the battery.
- Test Functionality: Turn on the golf cart and test the turn signals (left, right, and hazard if applicable) to ensure they are working correctly.
6. Operating Instructions
To operate the turn signal switch:
- Left Turn: Push the turn signal lever down. The left turn signal lights will flash.
- Right Turn: Push the turn signal lever up. The right turn signal lights will flash.
- Cancel Turn: Return the lever to the center position to turn off the signal.
- Hazard Lights (if applicable): Some models may include a separate button or a specific lever position for hazard lights. Consult your golf cart's manual for details.
7. Maintenance
The Red Hawk LGT-143A Turn Signal Switch requires minimal maintenance:
- Regular Inspection: Periodically check the switch and its wiring for any signs of wear, damage, or loose connections.
- Cleaning: Keep the switch free from dirt and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive cleaners.
- Flasher Relay: The flasher relay is integrated. If turn signals stop flashing, check the bulbs first. If bulbs are functional, the flasher relay may need replacement.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Turn signals do not light up. | No power, loose connection, faulty bulb, faulty switch. | Check battery connection. Verify all wiring connections. Inspect turn signal bulbs. Test the switch for continuity. |
| Turn signals light up but do not flash. | Faulty flasher relay, incorrect bulb type (e.g., LED without compatible flasher). | The LGT-143A has an integrated flasher. If bulbs are good, the flasher relay within the switch may be faulty. Ensure correct bulb types are used. |
| Turn signals flash too fast or too slow. | Incorrect flasher relay, incorrect bulb wattage. | The LGT-143A has a specific flasher. Verify all bulbs are of the correct wattage for your golf cart system. |
| Switch lever is loose or unresponsive. | Mechanical wear or damage. | The switch may need to be replaced. |
9. Specifications
- Model: LGT-143A
- Type: Turn Signal Switch with Flasher Relay
- Replaces OEM Numbers: Red Hawk: LGT-143A, Red Hawk: LGT-143
- Product Dimensions: Approximately 10.2 x 3.9 x 3.5 inches
- Item Weight: Approximately 1.4 pounds
- Manufacturer: Red Hawk
10. Warranty and Support
This product comes with a 30-day return policy and a 1-year warranty. If the product is not what you expected, it may be returned within 30 days for a refund, provided it is in its original packaging and good condition. Outside of 30 days, the manufacturer will replace the item anytime within one year of your order.
For technical support or warranty claims, please contact the retailer or manufacturer directly. Ensure you have your purchase details and product model number (LGT-143A) available.
