1. Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of the RHOX Red Hawk LGT-132A Turn Signal Kit. This kit is designed to enhance the safety and functionality of your golf cart by adding essential signaling and warning features.
The kit is suitable for 12V golf carts, including models from Club Car, EZGO, and Yamaha. Please ensure your golf cart operates on a 12V system for proper compatibility.
2. Package Contents
Before beginning installation, please verify that all components listed below are present in your package:
- Turn Signal Switch Assembly with Wiring Harness
- Flasher Unit
- Horn Button
- Brake Light Switch
- Horn
- Steering Column Covers (Upper and Lower)
- Mounting Hardware (Clamps, Screws, Zip Ties)
Image: All components of the Red Hawk LGT-132A Turn Signal Kit, including the turn signal switch, wiring harness, horn, brake switch, and mounting hardware.
3. Installation Instructions
Follow these steps carefully to install your turn signal kit. Professional installation is recommended if you are unfamiliar with automotive electrical systems.
3.1. Component Overview and Initial Connections
Familiarize yourself with the main components and their connections. The turn signal switch assembly connects to the main wiring harness.
Video: This video provides an overview of the kit components and initial wiring harness connections for the turn signal assembly.
3.2. Mounting the Horn
- Select a suitable location on the golf cart's front frame for the horn. Ensure it is protected from direct impact and water.
- Use the provided mounting bracket and hardware to securely attach the horn.
Image: The turn signal switch assembly, which includes the horn button and light controls.
3.3. Installing the Turn Signal Switch Assembly
- Position the turn signal switch assembly on the steering column.
- Use the provided clamps and screws to firmly secure the assembly to the steering column, ensuring it does not interfere with steering operation.
- Route the wiring harness neatly along the steering column and towards the main electrical system.
Video: This installation video demonstrates mounting the turn signal switch assembly to the steering column and connecting the wiring.
3.4. Installing the Brake Light Switch
- Locate the brake pedal mechanism.
- Attach the brake light switch to the brake pedal, ensuring it activates when the pedal is pressed. Secure the cable to prevent interference with pedal movement.
Image: The brake light switch, designed to activate brake lights when the pedal is engaged.
3.5. Covering the Steering Column
- Once the turn signal assembly is secured and wiring is routed, install the upper and lower steering column covers.
- Ensure the covers fit snugly and do not pinch any wires.
3.6. Final Wiring Connections
- Connect the main wiring harness to your golf cart's 12V power source, following the provided wiring diagram (if applicable).
- Ensure all connections are secure and insulated to prevent short circuits.
- Use zip ties to neatly bundle and secure all wiring, keeping it away from moving parts and heat sources.
4. Operating Instructions
Once installed, operate your turn signal kit as follows:
Image: Diagram illustrating the various functions of the turn signal lever.
- Turn Signals: Push the lever up for a right turn signal and down for a left turn signal. The lever will automatically return to the center position after the turn is completed or can be manually canceled.
- Horn: Press the button located on the end of the turn signal lever to activate the horn.
- Hazard Lights: Press the red triangular button on the turn signal assembly to activate hazard lights, causing all turn signals to flash simultaneously. Press again to deactivate.
- Light Controls: Rotate the knob on the lever to control your golf cart's lights (if connected). Positions typically include Off, Daytime Running Lights (if equipped), and Headlights/Taillights On. Pull the stem to flash high beams (if equipped).
5. Maintenance
To ensure the longevity and proper function of your turn signal kit, perform the following maintenance:
- Regularly inspect all wiring connections for corrosion or damage.
- Keep the turn signal switch assembly and other components clean and free of debris.
- Check the functionality of all lights, horn, and flasher periodically.
6. Troubleshooting
If you encounter issues with your turn signal kit, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Turn signals not working | Loose wiring connection, blown fuse, faulty flasher unit, damaged bulbs. | Check all wiring connections. Inspect and replace any blown fuses. Test the flasher unit. Replace damaged bulbs. |
| Horn not sounding | Loose horn connection, faulty horn button, damaged horn. | Check horn wiring. Test the horn button for continuity. Replace the horn if damaged. |
| Brake lights not activating | Brake light switch misaligned or faulty, loose wiring. | Adjust the brake light switch position. Check its functionality. Verify wiring connections. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | LGT-132A |
| Operating Voltage | 12V |
| Product Dimensions | 9.7 x 5.2 x 4 inches |
| Item Weight | 1.4 pounds |
8. Warranty & Support
This product comes with a 30-day return policy and a 1-year warranty. If your order arrives and is not what you expected, you may return it within 30 days for a refund. Within one year of your order, we will replace the item if it is found to be defective or damaged under normal use, provided it is in its original packaging and good condition.
For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please have your model number (LGT-132A) and purchase information ready.