1. Introduction
Thank you for choosing the MELPO 30W LED Flood Light. This product is designed to provide versatile and vibrant lighting for both indoor and outdoor applications. With 120 RGB color options, warm white light, and various dynamic modes, it offers extensive customization for any setting. This manual provides essential information for safe installation, operation, and maintenance of your flood lights.
Image: Four MELPO 30W LED Flood Lights with their respective remote controls, showcasing the product packaging and quantity.
2. Safety Information
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Ensure the power supply is disconnected before installation or maintenance.
- The product is rated IP66 waterproof, suitable for outdoor use, but do not submerge it in water.
- Use only with a power source within the specified voltage range (85-265V AC).
- Do not attempt to disassemble or modify the light fixture. This will void the warranty and may cause damage or injury.
- Keep the product away from flammable materials.
- If any damage is observed, discontinue use immediately and contact customer support.
3. Package Contents
Verify that all items are present and in good condition upon opening the package:
- MELPO 30W Color Changing LED Flood Light (4 units)
- Remote Control (4 units)
- User Manual (1 unit)
4. Product Features
- High Brightness: 30W LED, 3000LM output, equivalent to 300W traditional lighting.
- Extensive Color Options: 120 RGB colors plus warm white (2700K) for diverse lighting needs.
- Dimmable: Brightness can be adjusted via the remote control.
- IP66 Waterproof: Designed for reliable performance in various weather conditions, suitable for both indoor and outdoor use.
- 4 Preset Dynamic Modes: Smooth, Cozy, Fresh, and Romantic modes for instant atmosphere creation.
- Custom DIY Strobe/Flash Mode: Allows setting up to 10 colors to strobe or flash, with adjustable speed, ideal for holiday decorations like Halloween and Christmas.
- Timing Function: Schedule the lights to turn on/off at specific times daily.
- Memory Function: The light retains the last setting (color/mode) when turned off and on again.
- Sync Function: Multiple lights can be controlled simultaneously with one remote.
Image: A single MELPO 30W LED Flood Light positioned outdoors, emphasizing its waterproof design and suitability for landscape lighting.
Image: Various outdoor applications of the MELPO flood lights, including illuminating trees, architectural features, and creating vibrant pathways with different colors.
5. Specifications
| Parameter | Value |
|---|---|
| Power | 30W (300W Equivalent) |
| Luminous Flux | 3000 LM |
| Color Temperature | Warm White 2700K + 120 RGB Colors |
| Input Voltage | 85-265V AC |
| CRI | >80 |
| Beam Angle | 120° |
| Cable Length | 6.56 ft (2m) |
| Waterproof Rating | IP66 |
| Dimensions (L x W x H) | 5.82" x 1.3" x 4.37" |
| Material | Aluminum, Glass |
| Weight | 4.95 pounds (for 4-pack) |
Image: Detailed measurements of the flood light and the length of its power cord with a US 3-prong plug.
6. Setup
The MELPO 30W LED Flood Light is designed for easy installation with its adjustable mounting bracket.
6.1 Mounting Options
The integrated bracket allows for 360° multi-angle adjustment, enabling various installation methods:
- Wall Mounting: Secure the bracket to a vertical surface.
- Ground Mounting: Position the light on the ground, adjusting the angle as needed.
- Ceiling Mounting: Attach the bracket to an overhead surface.
Ensure the mounting surface is stable and can support the weight of the fixture. Use appropriate screws or anchors (not included) for your specific installation type.
6.2 Power Connection
Connect the US 3-plug power cord to a standard 85-265V AC power outlet. Ensure the connection is secure and protected from water if used outdoors.
Image: Visual guide demonstrating the flexibility of the mounting bracket for various installation scenarios.
7. Operation
The MELPO LED Flood Light is controlled via the included IR remote control. Ensure the remote is pointed towards the IR signal acceptor on the light fixture for optimal response.
Image: Layout of the remote control buttons and the location of the IR signal acceptor on the flood light.
7.1 Remote Control Functions
- Power On/Off: Press the power button to turn the light on or off.
- Brightness Adjustment: Use the 'Dim up' and 'Dim down' buttons to increase or decrease brightness.
- Color Selection: Use the color wheel on the remote to select from 120 RGB colors or warm white.
- Preset Modes:
- Smooth: Cycles through colors smoothly.
- Cozy: Creates a warm, inviting ambiance.
- Fresh: Provides a cool, refreshing light.
- Romantic: Sets a soft, romantic mood.
- DIY Strobe/Flash Mode (Custom Mode): Press the 'DIY-FLASH' button. You can then select up to 10 colors from the color wheel to flash or strobe. Use the 'Dim up' and 'Dim down' buttons (labeled 'speed up' and 'speed down' for DIY-FLASH) to adjust the flashing speed.
- Store Key: Save your customized settings for quick access.
- Timer Function: Use the timer button to set the light to turn on or off at specific times daily. For example, to turn on at 7:00 PM and off at 12:00 AM, set the timer accordingly.
7.2 Sync Function
If you have multiple MELPO flood lights, they can be controlled simultaneously by a single remote control. Point the remote towards the lights, and they will respond in sync.
Image: Example of the timing function in use, showing lights scheduled to turn on and off at specific times in an outdoor setting.
Image: Demonstrations of the flood lights changing colors on a house exterior and enhancing patio and general illumination areas.
Image: Examples of the flood lights' versatility for both indoor event decoration and outdoor landscape illumination.
8. Maintenance
Regular maintenance ensures the longevity and optimal performance of your MELPO LED Flood Light.
- Cleaning: Gently wipe the glass and aluminum housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the power cord for any signs of damage or fraying. Ensure all connections are secure.
- Heat Dissipation: Ensure the heat sink fins on the back of the light are not obstructed to allow for proper heat dissipation.
9. Troubleshooting
If you encounter issues with your MELPO LED Flood Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose connection; remote battery dead. | Check power outlet and connections. Ensure remote battery is functional and replace if necessary. |
| Remote control not working. | Remote battery dead; IR signal obstructed; remote out of range. | Replace remote battery. Ensure clear line of sight to the light's IR acceptor. Operate within 20 feet. |
| Colors are not changing or light is stuck on one color. | Remote control issue; light malfunction. | Try replacing remote battery. If issue persists, contact customer support. |
| Water inside the light fixture. | Improper installation; extreme weather conditions; manufacturing defect. | Ensure proper sealing during installation. If water ingress occurs, discontinue use and contact customer support immediately. |
If the problem persists after trying these solutions, please contact MELPO customer support.
10. Warranty and Support
MELPO provides a 2-year warranty for this product, ensuring high quality standards. Additionally, a 90-day refund guarantee is offered.
If you have any problems or receive defective lights, please do not hesitate to contact us. We are committed to resolving your issues within 24 hours.
For support, please visit the official MELPO store or contact customer service through your purchase platform.