1. Introduction and Overview
The BESTMED DET-306 Infrared Thermometer is a non-contact device designed for quick and accurate temperature measurement of the human body (forehead) and objects. Its advanced infrared technology ensures hygienic use by eliminating the need for direct skin contact or probe covers. This thermometer provides rapid readings within one second and features an intuitive 3-color indicator for easy interpretation of temperature levels. It is suitable for use with children, adults, and the elderly, making it an essential health monitoring tool for any household.

Figure 1: BESTMED DET-306 Infrared Thermometer
2. Product Features
- Non-Contact Measurement: Measures temperature from the forehead without physical contact, ensuring hygiene and convenience.
- Rapid and Accurate Readings: Equipped with high-precision infrared sensors, delivering temperature readings within 1 second with an accuracy of ±0.4 degrees Fahrenheit.
- Dual Measurement Modes: Capable of measuring both body temperature and object surface temperature (e.g., milk, food, room).
- Memory Function: Stores up to 10 sets of data, allowing for continuous tracking of temperature trends.
- Intelligent Color-Coded Display: The high-definition LCD screen displays temperature readings with a 3-color backlight for easy interpretation:
- Green: Temperature ≤ 99.1℉ (37.3℃) - Normal
- Orange: 99.1℉ - 100℉ (37.3℃ - 37.8℃) - Slightly elevated
- Red: Temperature ≥ 100℉ (37.8℃) - Fever alarm
- Switchable Units: Easily switch between Fahrenheit (℉) and Celsius (℃).
3. Setup
3.1. Battery Installation
The thermometer requires 2 AAA batteries. To install or replace batteries:
- Locate the battery compartment cover on the back of the device.
- Slide the cover downwards to open the compartment.
- Insert 2 AAA batteries, ensuring correct polarity (+ and -).
- Slide the battery compartment cover back into place until it clicks securely.

Figure 2: Battery Compartment
4. Operating Instructions
4.1. Powering On/Off
- To turn on the device, press the Power/Mode button (bottom button). The display will light up.
- The thermometer will automatically turn off after a period of inactivity to conserve battery life.
4.2. Switching Measurement Modes (Body/Object)
The thermometer supports two measurement modes: Body mode (indicated by a person icon) and Object mode (indicated by a house icon).
- Press the Power/Mode button to toggle between Body and Object modes. The corresponding icon will appear on the LCD.
4.3. Taking a Temperature Reading
- Ensure the thermometer is in the desired measurement mode (Body or Object).
- For body temperature, position the device 2 to 3 cm (0.8 to 1.2 inches) from the center of the forehead. For object temperature, point it at the object's surface.
- Press the START button (top button).
- The reading will appear on the LCD display within one second, accompanied by a beep.

Figure 3: Thermometer Display
4.4. Interpreting the Color-Coded Display
The LCD backlight changes color to indicate temperature status:
- Green: Normal temperature (≤ 99.1℉ / 37.3℃).
- Orange: Slightly elevated temperature (99.1℉ - 100℉ / 37.3℃ - 37.8℃).
- Red: Fever detected (≥ 100℉ / 37.8℃). An audible alarm may also sound.
4.5. Switching Temperature Units (℉/℃)
To switch between Fahrenheit and Celsius:
- With the device powered on, press and hold the Power/Mode button for a few seconds until the unit changes.
4.6. Memory Recall
The thermometer stores the last 10 temperature readings.
- To access memory, with the device powered on, briefly press the START button repeatedly to cycle through stored readings.
5. Maintenance
5.1. Cleaning the Thermometer
To ensure accurate readings and hygiene, clean the thermometer after each use.
- Wipe the probe and the body of the thermometer with an alcohol swab or a cotton swab moistened with 70% isopropyl alcohol.
- Do not soak the thermometer in water or any cleaning solution.
- Allow the thermometer to air dry completely before storing.
5.2. Storage
- Store the thermometer in a cool, dry place, away from direct sunlight, dust, and extreme temperatures.
- If the device will not be used for an extended period, remove the batteries to prevent leakage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| "Lo" or "Hi" displayed | Temperature is outside the measurable range (89.6℉ - 109.4℉). | Ensure proper distance (2-3 cm) and target area. If measuring body temperature, ensure the person is not in an extremely cold or hot environment. |
| Inconsistent readings | Improper measurement technique, dirty sensor, or environmental factors. | Ensure consistent distance and target. Clean the sensor regularly. Avoid taking readings in direct sunlight or strong drafts. Wait a few minutes between readings if consecutive measurements are needed. |
| Device does not turn on | Dead or incorrectly installed batteries. | Check battery polarity. Replace with new AAA batteries. |
| Fever alarm sounds for normal temperature | Possible calibration issue or user error. | Re-read the temperature carefully. If the issue persists, contact customer support. |
7. Specifications
| Specification | Detail |
|---|---|
| Model Number | DET-306 |
| Measurement Range | Body: 89.6℉ to 109.4℉ (32.0℃ to 43.0℃) |
| Accuracy | ±0.4℉ (±0.2℃) |
| Measurement Time | Approximately 1 second |
| Display Type | LCD with 3-color backlight |
| Power Source | 2 x AAA batteries |
| Battery Life | Approx. 1 year / 6000 readings |
| Product Care Instructions | Do Not Soak |
| Outer Material | Acrylic |
| Connectivity Technology | Infrared |
| Item Dimensions (L x W x H) | 6.97 x 3.82 x 2.05 inches |
| Item Weight | 4.66 ounces (with batteries) |
| Manufacturer | Joytech Healthcare |
Note: Specifications are subject to change without notice.
8. What's in the Box
- 1 x Touchless Infrared Thermometer (DET-306)
- 1 x User Manual (this document)
- 2 x LR03 (AAA) Batteries

Figure 4: Product Packaging
9. Warranty and Support
For detailed warranty information and customer support, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.