INSE Y10

Download PDF
Contents

INSE Y10 Wireless Robotic Pool Cleaner User Manual

Model: Y10

Introduction

Thank you for choosing the INSE Y10 Wireless Robotic Pool Cleaner. This automatic pool vacuum is designed to provide efficient and hassle-free cleaning for your above-ground pool. With its powerful suction, long runtime, and self-parking feature, the INSE Y10 simplifies pool maintenance, allowing you to enjoy a clean pool with minimal effort. Please read this manual thoroughly before operating the device to ensure proper use and maintenance.

Key Features

  • Powerful Cleaning Performance: Equipped with strong motors, the INSE Y10 features enhanced suction power. It has two suction inlets and an independent long brush designed to easily capture and filter more dirt, leaves, and debris. Ideal for above-ground and in-ground pools. (Note: Not suitable for sloped pools or pools with wrinkles).
  • Wireless Design: Unlike traditional suction and pressure pool cleaners, the INSE Y10 automatic pool cleaner is wireless and hassle-free. No pumps are needed. Simply turn on the robotic pool cleaner and submerge it in your pool, and the cleaning process begins automatically. No more messy hoses or tangled cords. Save energy and improve pool cleaning efficiency.
  • Large Battery Capacity & Long Runtime: Our wireless automatic pool cleaner adopts a 5200mAh rechargeable battery, providing a continuous runtime of up to 90 minutes, sufficient for cleaning in-ground and above-ground pools up to 1100 sq ft.
  • Self-Parking Function: When this robotic pool vacuum is in a low battery state or finishes its cleaning task, it will automatically stop near the inner edge of the pool. You can easily retrieve the automatic pool cleaner by grabbing the floating wrist pull to avoid getting wet.
  • Easy to Operate: Just press the switch to activate the automatic pool cleaner, then submerge it in the pool. Our pool robot will then start working automatically. With a pre-programmed zigzag path, it can cover a larger cleaning area and reduce missed spots, increasing efficiency by 20%.
  • Extremely Lightweight: The INSE Y10 wireless pool vacuum weighs only 6 pounds. You can easily carry it to your in-ground or above-ground pool.

Product Overview

Familiarize yourself with the components of your INSE Y10 pool cleaner.

INSE Y10 Wireless Robotic Pool Cleaner in water

The INSE Y10 Wireless Robotic Pool Cleaner, shown partially submerged in water, highlighting its compact design and readiness for operation.

Setup

  1. Charge the Cleaner: Before first use, fully charge the INSE Y10 using the provided charging adapter. Ensure the charging port is dry before connecting. The indicator light will show charging status.
  2. Prepare the Pool: Ensure the pool is free of large debris that could obstruct the cleaner's path or suction.
  3. Activate and Submerge: Press the power button on the cleaner to turn it on. Carefully submerge the cleaner into the pool. It will begin its cleaning cycle automatically once fully submerged.

Operating Instructions

  1. Starting Operation: Once submerged and activated, the INSE Y10 will follow a pre-programmed zigzag path to clean the pool floor.
  2. Monitoring: Allow the cleaner to complete its cycle. The device operates autonomously.
  3. Retrieval: When the battery is low or the cleaning cycle is complete, the cleaner will automatically move to the edge of the pool. Use the floating wrist pull to retrieve the unit from the water.
  4. Power Off: After retrieval, turn off the cleaner by pressing the power button.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your INSE Y10.

  • Clean the Filter: After each use, open the cleaner and remove the filter basket. Rinse the filter basket thoroughly with clean water to remove all collected debris. Ensure it is completely clean before reinserting.
  • Clean the Brushes: Inspect the brushes for any tangled hair or debris and clean them as needed.
  • Charge After Use: Always charge the cleaner after each use to ensure it's ready for the next cleaning cycle. Store in a cool, dry place.
  • Store Properly: When not in use for extended periods, store the cleaner in a dry, shaded area, away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Cleaner does not turn on.Low battery; Power button not pressed correctly.Charge the cleaner fully; Ensure the power button is pressed firmly.
Poor cleaning performance.Filter basket is full; Brushes are dirty or worn; Large debris obstructing suction.Clean the filter basket; Clean or replace brushes; Remove large debris from the pool manually.
Cleaner gets stuck or moves erratically.Obstruction in the pool; Pool surface is too sloped or has wrinkles (not suitable for these types).Remove any pool toys or large objects; Ensure pool type is compatible with the cleaner.
Cleaner does not self-park.Battery completely drained; Malfunction.Retrieve manually and charge; Contact customer support if issue persists.

Specifications

FeatureDetail
Shipping Dimensions39.7 x 32.41 x 19.1 cm; 4.25 kg
Power Source TypeBattery Powered
ManufacturerINSE
ASINB0BRTRN7MK
First Available DateFebruary 27, 2023
BrandINSE
Model NameINSE Y10
Special FeatureLightweight, Self-Propelled, Wireless
Assembly RequiredNo
Lithium Battery Energy Content56.16 Watt Hours

Warranty and Support

For warranty information and technical support, please refer to the product packaging or contact INSE customer service directly. Keep your purchase receipt as proof of purchase.

© 2023 INSE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.