Fila Work Memory Layers Evo Sr Wr

Fila Men's Work Memory Layers Evo Sr Wr Shoes Instruction Manual

Model: Work Memory Layers Evo Sr Wr

Introduction

This manual provides essential information for the proper use, care, and maintenance of your Fila Men's Work Memory Layers Evo Sr Wr shoes. Adhering to these instructions will help ensure the longevity and performance of your footwear, designed for comfort and safety during long work shifts.

Product Features

  • Material: 100% Synthetic upper with leather and mesh components.
  • Footbed: Memory Plus footbed with COOLMAX fiber for enhanced comfort and moisture management.
  • Outsole: Durable rubber outsole offering superior oil and slip-resistance protection.
  • Safety Standards: Complies with ASTM F2913-11 safety standards for slip resistance.

Setup

Upon receiving your Fila Work Memory Layers Evo Sr Wr shoes, ensure they are properly laced for a secure and comfortable fit. Adjust the laces to provide adequate support without being too tight, allowing for natural foot movement. It is recommended to wear them for short periods initially to allow the memory foam footbed to conform to your foot shape.

Side view of the Fila Men's Work Memory Layers Evo Sr Wr shoe, showing the black synthetic and mesh upper with laces.

Image: Side view of the Fila Work Memory Layers Evo Sr Wr shoe, highlighting the overall design and lacing system.

Usage Guidelines

These shoes are designed for work environments requiring comfort and slip resistance. Always ensure your laces are tied securely to prevent tripping hazards. The slip-resistant outsole is effective on various surfaces, but caution should always be exercised on wet or oily floors. The Memory Plus footbed provides cushioning for extended wear, enhancing comfort throughout your workday.

Top-down view of the Fila Men's Work Memory Layers Evo Sr Wr shoe, showing the 'WORKING COMFORT' label on the insole.

Image: Top-down view of the shoe, illustrating the 'WORKING COMFORT' feature of the insole.

Care and Maintenance

To maintain the quality and appearance of your Fila work shoes, clean them regularly. Use a soft brush or damp cloth to remove dirt and debris from the synthetic and mesh upper. For stubborn stains, a mild soap solution can be used, followed by wiping with a clean, damp cloth. Allow shoes to air dry completely at room temperature, away from direct heat or sunlight. Do not machine wash or tumble dry. Periodically check the outsole for wear and tear, especially the slip-resistant tread.

Front view of the Fila Men's Work Memory Layers Evo Sr Wr shoe, showing the toe box and lacing.

Image: Front view of the shoe, detailing the toe box and lacing area.

Troubleshooting

  • Reduced Slip Resistance: Inspect the outsole for excessive wear or embedded debris. Clean the tread thoroughly. If the tread is significantly worn, the slip-resistant properties may be compromised, and replacement may be necessary.
  • Discomfort: Ensure the shoes are the correct size and fit. Adjust lacing for optimal support. Allow time for the memory foam to adapt to your foot. If discomfort persists, consult a footwear professional.
  • Odor: Ensure shoes are properly aired out after each use. Consider using odor-absorbing inserts or sprays.
Bottom view of the Fila Men's Work Memory Layers Evo Sr Wr shoe, showing the slip-resistant sole pattern.

Image: Bottom view of the shoe, showcasing the specialized slip-resistant sole pattern.

Technical Specifications

SpecificationDetail
Brand NameFila
Model NameWork
MaterialBlend (Synthetic/Mesh/Leather)
Outer MaterialMesh
Item Weight1.7 Pounds
Item Dimensions (LxWxH)12 x 8 x 4.5 inches
Sport TypeWalking
Safety StandardASTM F2913-11 (Oil and Slip-Resistance)
Side view of the Fila Men's Work Memory Layers Evo Sr Wr shoe, showing the Fila logo on the side.

Image: Another side view of the shoe, highlighting the Fila branding.

Sizing Information

Refer to the table below for US, UK, and European shoe size conversions to ensure the best fit for your Fila Work Memory Layers Evo Sr Wr shoes.

Brand SizeUKEurope
6.55.539
7639.5
7.56.540
8741
8.57.541.5
9842
9.58.542.5
10943
10.59.544
111044.5
11.510.545
121146
12.511.546.5
131247
141348
151449
161550
171651
181752

Warranty and Support

For information regarding warranty coverage or to obtain support for your Fila Work Memory Layers Evo Sr Wr shoes, please refer to the official Fila website or contact Fila customer service directly. Keep your proof of purchase for any warranty claims.

© 2023 Fila. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.