BaBylissPRO FX3 Standard Tooth Replacement Blade (FX703B) Instruction Manual

1. Introduction

This manual provides instructions for the BaBylissPRO FX3 Standard Tooth Replacement Blade, model FX703B. This blade is designed for use with BaBylissPRO FXX3TB and FXX3T trimmers, offering precise and clean cutting performance. It features a durable titanium carbon-nitride construction, suitable for various hair textures and skin sensitivities.

Image 1.1: BaBylissPRO FX3 Standard Tooth Replacement Blade (FX703B) in its retail packaging, showing the blade and its clear plastic case.

2. Blade Features

• Material: Titanium carbon-nitride for strength and durability.
• Compatibility: Specifically designed for BaBylissPRO FXX3TB and FXX3T trimmers.
• Performance: Engineered for ultra-precise, clean cuts on various hair textures.
• Skin Sensitivity: Hypoallergenic properties make it suitable for sensitive skin.

Image 2.1: Front view of the BaBylissPRO FX3 Standard Tooth T-Blade, model FX703B, highlighting its design and compatibility with FX3 trimmers.

Image 2.2: An illustrative chart comparing various blade styles for clippers and trimmers, including Taper, Fade, Wedge, Fine Tooth T-Blade, Standard Tooth T-Blade, and Deep Tooth T-Blade. The FX3 Standard Tooth T-Blade is highlighted as suitable for all hair textures and skin sensitivity levels.

Image 2.3: A chart detailing different blade materials such as Stainless Steel, Graphite, Diamond-Like Carbon, Titanium, and DLC/Titanium. The Titanium material, used in this blade, is described as strong, durable, and hypoallergenic.

3. Installation Instructions

Follow these steps to safely remove the old blade and install the new BaBylissPRO FX3 Standard Tooth Replacement Blade.

Image 3.1: An exploded view showing the individual components of the BaBylissPRO FX3 blade assembly, including the fixed blade, cutting blade, spring, and screws.

3.1. Removing the Old Blade

1. Ensure the trimmer is turned to the OFF position.
2. Locate and remove the two long screws that secure the fixed blade to the trimmer unit.
3. Once the screws are removed, the entire blade assembly will detach from the trimmer unit.

3.2. Installing the New Blade

1. Carefully remove the new replacement blade from its packaging.
2. Align the new blade assembly onto the trimmer housing, ensuring the motor shaft properly engages with the blade coaches.
3. Insert and securely tighten the two long screws to fasten the blade assembly to the trimmer.

3.3. Zero-Gapping the Blade (Optional)

For an ultra-close cut, you may choose to zero-gap the blade. This procedure should be performed with caution.

1. Loosen the two small Allen screws located on top of the black cutting blade.
2. Carefully push the black cutting blade upwards until it reaches the desired zero-gap position. Ensure the cutting blade teeth are flush with, but not extending beyond, the fixed blade teeth.
3. Once the desired gap is achieved, securely tighten the two small Allen screws to lock the blade in place.

Image 3.2: The back of the BaBylissPRO FX3 blade packaging, displaying multi-language instructions for blade removal, replacement, and zero-gapping.

4. Operating the Trimmer with the New Blade

Once the new blade is securely installed, your BaBylissPRO FXX3TB or FXX3T trimmer is ready for use. This standard tooth blade is designed for general trimming and outlining, providing a smooth and efficient cutting experience across various hair types.

• Ensure the trimmer is fully charged or connected to power.
• Turn on the trimmer and begin trimming as desired.
• Always use the trimmer on clean, dry hair for optimal performance and blade longevity.

5. Maintenance and Care

Proper maintenance ensures the longevity and performance of your BaBylissPRO FX3 replacement blade.

• Cleaning: After each use, brush away any loose hair from the blade using a small cleaning brush.
• Oiling: Regularly apply a few drops of clipper oil to the blade teeth while the trimmer is running to lubricate and prevent rust. Wipe off any excess oil.
• Storage: Store the trimmer with the blade attached in a clean, dry place.
• Replacement: Replace the blade when it becomes dull or damaged to maintain optimal cutting performance and prevent hair pulling.

6. Troubleshooting

If you encounter issues with your BaBylissPRO FX3 replacement blade, consider the following:

7. Specifications

8. Warranty and Support

For warranty information, technical support, or further assistance with your BaBylissPRO FX3 Standard Tooth Replacement Blade, please contact BaBylissPRO customer service directly. Refer to the official BaBylissPRO website or product packaging for contact details.

Manufacturer: BaBylissPRO

Website: www.babylisspro.com