Okin 2-Pin Y Splitter Cable Power Cord Replacement (4.6ft & 0.66ft)

1. Product Overview

The Okin 2-Pin Y Splitter Cable is designed to provide a multi-functional power solution for electric furniture. This cable allows a single power supply transformer to power two motors simultaneously, commonly found in electric recliners and lift chairs. It features a 2-pin hybrid plug (one round, one flat) for connection to the transformer and two 2-pin sockets with clips for motor attachment. This product is ideal for replacing damaged cords or expanding existing power systems.

Image 1: The Okin 2-Pin Y Splitter Cable, showing the main cable and two branch cables.

2. Safety Information

Always disconnect power from the main power supply before installing or removing the splitter cable.
Ensure all connections are secure and free from damage before restoring power.
Do not expose the cable to water or excessive moisture.
Avoid placing heavy objects on the cable or bending it sharply, as this can cause damage.
If the cable appears damaged, discontinue use immediately and replace it.

3. Package Contents

1 x Okin 2-Pin Y Splitter Cable Power Cord (Main cable: 4.6 ft, Branch cables: 55 inches and 8 inches)

Note: Motor and transformer are not included.

4. Setup and Installation

Follow these steps to correctly install your Okin Y Splitter Cable:

Disconnect Power: Ensure the electric recliner or lift chair is unplugged from the wall outlet to prevent electrical hazards.
Identify Connections: Locate the power supply transformer and the motor connection ports on your electric furniture.
Connect to Transformer: Take the 2-pin hybrid plug (one round, one flat) of the Okin Y splitter cable and securely connect it to the output port of your power supply transformer.
Connect to Motors: Attach each of the two 2-pin sockets with clips from the Y splitter cable to the corresponding input ports on your recliner motors. Ensure the clips are fully engaged for a secure connection.
Organize Cables: Route the cables neatly to avoid pinching or tripping hazards.
Restore Power: Once all connections are secure, plug the electric recliner or lift chair back into the wall outlet.

Diagram showing Okin Y Splitter Cable connections to transformer and motors

Image 2: Connection diagram illustrating how to connect the Y splitter cable to a power supply transformer and two recliner motors.

5. Operating Instructions

Once the Okin Y Splitter Cable is correctly installed, the operation of your electric recliner or lift chair remains unchanged. Use the existing controls (hand remote or integrated buttons) of your furniture to operate the motors as usual. The splitter cable simply facilitates power distribution from a single source to two motors.

6. Maintenance

Cleaning: Wipe the cable with a dry, soft cloth. Do not use liquid cleaners.
Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors.
Storage: If storing the cable, coil it loosely. Avoid tight coiling or kinking, which can damage the internal wires.
Environment: Keep the cable away from extreme temperatures, direct sunlight, and areas where it might be chewed by pets or damaged by furniture movement.

7. Troubleshooting

Problem	Possible Cause	Solution
No power to either motor.	Main power supply unplugged. Faulty power supply transformer. Y splitter cable not securely connected to transformer. Damaged Y splitter cable.	Check wall outlet and main power cord. Test transformer with a single motor if possible, or replace. Ensure the 2-pin hybrid plug is fully inserted into the transformer. Inspect cable for visible damage; replace if necessary.
Only one motor receives power.	Loose connection to the non-working motor. Faulty motor. Damage to one branch of the Y splitter cable.	Check the 2-pin socket connection to the non-working motor. Test the motor directly if possible, or swap connections to isolate the issue. Inspect the specific branch cable for damage; replace the Y splitter if damaged.

8. Specifications

Model Number: R5.216.01.024D
Main Cable Length: 1.4 meters (4.6 feet)
Branch Cable Lengths: 140 cm (55 inches) and 20 cm (8 inches)
Connector Type (Input): 2-pin hybrid plug (one round, one flat)
Connector Type (Output): Two 2-pin sockets with clips
Material: High-quality pure copper core
Item Weight: Approximately 2.89 ounces
Package Dimensions: 8.7 x 6.34 x 1.14 inches

9. Compatibility

This Okin 2-Pin Y Splitter Cable is compatible with a wide range of electric recliners and lift chairs that utilize a 2-pin hybrid connection for their power supply and motors. Known compatible brands include:

Okin
Dewert
Lazyboy
Pride
Catnapper
Limoss

Always verify the plug design of your existing components to ensure compatibility before purchase.

10. Warranty and Support

For any questions, concerns, or support regarding your Okin 2-Pin Y Splitter Cable, please contact Okin customer service. Refer to your product packaging or the Okin official website for the most current contact information and warranty details.

	Assembly Instructions for YB2213 Power Lift Recliner Chair Step-by-step assembly guide for the YB2213 power lift recliner chair, including package contents, connection steps, and wiring instructions for power and remotes. Features heat and massage functions.
	OKIN HSW306 5-Pin to 7-Pin Remote Controller Replacement Guide Step-by-step instructions for replacing an OKIN HSW306 5-pin recliner remote controller with a 7-pin model, including wiring bypass, installation steps, and recommended accessories.
	Okin Systems Troubleshooting Guide: Lift Chair Repair and Maintenance Comprehensive troubleshooting guide for Okin Systems used in lift chairs. Learn to diagnose and fix common issues with hand controls, transformers, motors, and spindle nuts. Includes installation tips.
	OKIN RF.31.24.01 Remote Control System User Manual Comprehensive user manual for the OKIN RF.31.24.01 22-key remote control system, detailing button functions, position setting procedures, and system components for adjustable beds.
	OKIN CB3433A Control Box Function Instruction and Operation Guide This document provides a detailed function instruction for the OKIN CB3433A control box, a component for adjustable furniture systems manufactured by OKIN, a Phoenix Mecano Company. It outlines the electrical configuration, describes the control box interface, and explains the operation of various actuators (head, foot, lumbar), massage motors, and underbed RGB lighting. The guide also covers LED indicators, pairing procedures, connectivity options (SYNC, USB, UART), power requirements, and includes FCC and ISED RSS regulatory warnings. Written by Jarek from the R&D Division.
	OKIN S2-2# Dual Column System: Instruction Manual & Operation Guide Comprehensive guide for the OKIN S2-2# Dual Column System. Learn how to operate, set limits, troubleshoot errors, and understand technical specifications for your height-adjustable desk.

Okin R5.216.01.024D